Awesome, I've been wanting to build but I'm very not sure on the parts to assemble. Now I have a more or less of an idea. I've also reached to Mr GSpeed and gave me your channel furthermore most of the stuff if not all are sold out or out of stock.
I appreciate you taking your time to do these builds, there's not a whole lot of them rigs down here. I mainly want to assemble one from my own leisure. Rock on friend. I'll keep searching for them parts nonetheless.
I am starting my first g speed build picked up the v3 ar44 kit I also picked up the tgh low trany with hard core links when mount the links to the axle in the front and try to get the upper third link it pushed the axle out of line from the frame. In the back seams to work ok but drive line shaft is at an aggressive angle pointed at the ground feels like the links are binding on the link mounts on the axle. Any thoughts
Thanks for the video. I would like to build a Gspeed chassis. Currently have the SCX10.3. From your video's is it safe to assume I could just carry everything over from my SCX10.3 to the GSPEED chassis? Thanks again
@@miniboom007 I have only ever used the axles from the 10.3, links maybe I’m not sure how they line up. And you would need some of the gspeed components like servo mount, panhard and spacers.
I had pulled these off an older build awhile back, I put traxxas rod ends on them. But they are 12.3 links, I’m guessin from hardcore RC or in the works RC
Great video! Always improving in how you put your information together. I thought the GSpeed aluminum rails were mainly applicable to a Class 1 build? Why are you using them for this non-Class 1 build? Many thanks.
Hey all so now 4 3 months latter is there anything you'd chance with any new update parts. I've got a capra and a sxc10.2 and I wanna build a G-speed lcg belly dragger. I'm in Australia and there not that common here yet but I wanna do it haha I've got a yellow jacket 1500 and a sw4 esc. So whats the go? Cheers Jay
@@TRDAdventures hey man how r ya bet ya keen for ya comp coming up. I bet this get asked heaps ive just returned to the hobby fro fpv. I've got the above rigs. Just wanna know what would be the top tip with all the good gear that out now for a lcg belly dragger with 1.9 3 or 4 s using axial capra or scx10.2 donner rigs. I've made bad choices back in the day lots of $$$ wasted all becoz I watched a 5yrold video and didn't realise the rc ways has changed heaps haha
@@TRDAdventures hey man waiting here in Australia for your live feed 😃 basically I wanna use the 1500 yellow jacket. I wanna run 4s A gspeed chassi would be nice I just don't wanna buy parts if there's a new version coming out
Thank You for another full build video , Really enjoyed this one , Question for You , did You use some PunksCustom 3D parts in one of your previous builds and did You link the parts ? I thought I saw one of the punks custom body mounts on one of your other rigs , I've been going through your videos trying to find the part ,,thanks for posting :)
I haven’t used any but I have thinking bout or sing a few of the unicorn body mounts. It was prolly the mount on my yellow c2 that I made out of a bumper brace.
@@TRDAdventures It was the yellow C2 ! thank You :) , Im going to build a G Speed based chassis with TRX4 axles and one of the VERY OVERPRICED TRX4 SKIDs from Shapeways so I can use the TRX4 Transmission , I wanted to use the single Post like on Your Yellow C2 , As You said in a previous video , "Power Wagon Body THIS IS THE WAY" ,,,LOL ,,I instantly knew it had to be a Power Wagon Body to make it work ,,Thanks for the inspiration
Hey man, I need some help, when I fill dravtech shock with oil, do I push shaft all the way up then close cap or just close the cap with the shaft full extended? Sorry if I don't make sense...thanks in advance
Perfect timing with this video! Going to be building a CF V3 chassis in the next week. Your videos help so much!
Glad to hear they are helping
You really make it look simple👍🏾
Wow sweet lineup of goodies going to be a schweet truck 🤓😎🙏 great job of squeezing in so much info thank you
Im trying lol
Awesome video👍🤙
Awesome bro new to the channel and RC inspiring me to build one!
Awesome, I've been wanting to build but I'm very not sure on the parts to assemble. Now I have a more or less of an idea. I've also reached to Mr GSpeed and gave me your channel furthermore most of the stuff if not all are sold out or out of stock.
Yea acquiring parts right now seems to be the hardest tasks in getting a build done or goin. J
I appreciate you taking your time to do these builds, there's not a whole lot of them rigs down here. I mainly want to assemble one from my own leisure. Rock on friend. I'll keep searching for them parts nonetheless.
Very nice , thanks for the video !
Like the wheels.
I noticed your 3 link in the front. Where would u mount the link on . The steering link side or the panhard mount side?
The 3rd link only mounts to one side on these ar45 straight axles
I am starting my first g speed build picked up the v3 ar44 kit I also picked up the tgh low trany with hard core links when mount the links to the axle in the front and try to get the upper third link it pushed the axle out of line from the frame. In the back seams to work ok but drive line shaft is at an aggressive angle pointed at the ground feels like the links are binding on the link mounts on the axle. Any thoughts
cool build
Probably a stupid question but where do you get all the screws and stuff for these builds? Do they come with or?
I get like a monster bag bolt hot from team KNK every once in awhile and then just sort them out
Thanks for the video. I would like to build a Gspeed chassis. Currently have the SCX10.3. From your video's is it safe to assume I could just carry everything over from my SCX10.3 to the GSPEED chassis? Thanks again
No not with the 10.3x. The transmission is an issue and would require custom mounts and skid of some sort.
@@TRDAdventures so in my case if I get a scx10 tranny. Then everything else off the SCX10.3 would be a direct bolt on?
@@miniboom007 I have only ever used the axles from the 10.3, links maybe I’m not sure how they line up. And you would need some of the gspeed components like servo mount, panhard and spacers.
Nice video. Learning lots about GSpeed builds. Where do you get bent links from?
I had pulled these off an older build awhile back, I put traxxas rod ends on them. But they are 12.3 links, I’m guessin from hardcore RC or in the works RC
Great video! Always improving in how you put your information together. I thought the GSpeed aluminum rails were mainly applicable to a Class 1 build? Why are you using them for this non-Class 1 build? Many thanks.
This is the V3 rails which now come in aluminum. Just a new material option available due to some requests. The v1-c1 chassis is still aluminum only.
Nice brother
i love it, thanks for your sharing
Love the build, do you have any partnumbers for the links ? and the rest of the build. så i can ordrer an build my own :)
Links I used the custom link builder from InTheWorks rc
Hey all so now 4
3 months latter is there anything you'd chance with any new update parts.
I've got a capra and a sxc10.2 and I wanna build a G-speed lcg belly dragger. I'm in Australia and there not that common here yet but I wanna do it haha
I've got a yellow jacket 1500 and a sw4 esc. So whats the go?
Cheers
Jay
What’s up
@@TRDAdventures hey man how r ya bet ya keen for ya comp coming up.
I bet this get asked heaps ive just returned to the hobby fro fpv.
I've got the above rigs.
Just wanna know what would be the top tip with all the good gear that out now for a lcg belly dragger with 1.9 3 or 4 s using axial capra or scx10.2 donner rigs. I've made bad choices back in the day lots of $$$ wasted all becoz I watched a 5yrold video and didn't realise the rc ways has changed heaps haha
@@Yoyoyo32 gotcha, well lots of good stuff and competitive stuff on the market right now. Anything specific your looking to get
@@TRDAdventures hey man waiting here in Australia for your live feed 😃 basically I wanna use the 1500 yellow jacket. I wanna run 4s
A gspeed chassi would be nice I just don't wanna buy parts if there's a new version coming out
What panhard link did you use, was it included in the kit with axles?
I used links from InTheWorks RC
Really interested in building one of these! I have built a few axial kits but nothing like this. Do you have a parts list?
Just what I used, I did do a recent video covering stuff you’ll need as well
Thank You for another full build video , Really enjoyed this one , Question for You , did You use some PunksCustom 3D parts in one of your previous builds and did You link the parts ? I thought I saw one of the punks custom body mounts on one of your other rigs , I've been going through your videos trying to find the part ,,thanks for posting :)
I haven’t used any but I have thinking bout or sing a few of the unicorn body mounts. It was prolly the mount on my yellow c2 that I made out of a bumper brace.
@@TRDAdventures It was the yellow C2 ! thank You :) , Im going to build a G Speed based chassis with TRX4 axles and one of the VERY OVERPRICED TRX4 SKIDs from Shapeways so I can use the TRX4 Transmission , I wanted to use the single Post like on Your Yellow C2 , As You said in a previous video , "Power Wagon Body THIS IS THE WAY" ,,,LOL ,,I instantly knew it had to be a Power Wagon Body to make it work ,,Thanks for the inspiration
@@grski900000000000000 awesome, sounds like a great project, glad my videos can help out some.
Do you have any bump steer
Minimal if any I don’t really notice it
Hey man, I need some help, when I fill dravtech shock with oil, do I push shaft all the way up then close cap or just close the cap with the shaft full extended? Sorry if I don't make sense...thanks in advance
Full extended ones it’s filled.
Wait, wait, wait a minute. You're telling me the treal 45p diff cover will fit the 45s axles!? That's good to know!!
Yup yup
Hi Tim, hoe does KLR/M perform compare to OG KLR? which terrain best for KLR/M? Thanks.
KLR/m is better suited for all terrain, loose rock dirt, mud, when it comes to pure rock the og is better.
Is that the AR44’s? What links did you use and what’s your wheel base? Standard 12.3 or did you go longer?
These are ar45 straight axle I’m. Little longer on the wb
@TRD Adventures do you have a link for the transmission and axles thats on this video
Just the axial ar45 straight axle kit. And and axial scx10 3 gear transmission, and this one had a forward motor mount from corrupt carbon works.
@@TRDAdventures were those ar44 axles that came with the shocks and looked like they were all put together
@@Toysojah671 no they are the ar45 straight axle.
Do you know what chassis material is the toughest to impact ?
The carbon steel would be the strongest
@@TRDAdventures thanks.
Is the V3 chassis a direct swap for the trx4 sport?
Not a direct swap no. Most use the trx4 axles and ditch the trans, but InTheWorks RC does make a kit for the trx4 to use the trans
Hi what axle is that is that ar45 kit? And also what motor mount is that sir? Thanks
Yea Ar45 straight axle kit and it is the corrupt carbon works FMM
@@TRDAdventures where I can buy the motor mount and what size of links I can buy?
@@jpcastro21 I got it from corrupt carbon works, and links I got the Ar45 straight axle links from InTheWorks RC.
From whom was the motor mount?' I tried to listen to it 3 times and didnt get it.
Corrupt carbon works
@@TRDAdventures Thanks a bunch...its a very neat setup !
How will u charge do a build for some who will buy it
Kinda depends on the build and what all is involved.
One like that with a hard body
I have a capra I want to use can u do a walk through for that
Could you please share an exact transmission and front motor mount names?
I did using an axial scx10 3 gear trans and a corrupt carb works FMM
Those glasses kill me bro
Just wait til the new color arrives lol
@@TRDAdventures orange for the full blippi look? Lol
No unfortunately not this time, close. Maybe orange next time.
The links is for 10.2 or 10.3?
These were for 10.2
@@TRDAdventures Thank you TRD i want use your same set up.!!!
Where did you get the foward motor mount from?
Corrupt carbon works
Hello mate what links did you use in this build
These were in the works Rc links and with some Traxxas rod ends
🥰🤩💯💥👍👏
What is ur transmision
Scx10 3 gear with a FMM
😍🤩💥💯👍👏