Very good po sir. Sir yong sub ko pioneer pag RCA wire gamit ko ok may sound. Pero pag wired na gamit ko econnect sa Input ng sub wl sounds. Sn po may video kyo how to repair or basic trouble shoot sa ganong problem. Thanks sir for sharing your knowledge its a BIG BIG HELP. More power to you keep up the good work and keep safe.
I have the same sub - JBL 200/230. The red light is on, and there is no sound. I checked all the capacitors, and replaced one of the big ones because it had a very slightly raised top. That didn't help. There are no burnt signs on the board. All components visually seem healthy. The only sound I can get, is when I unplug and plug the black connector going between two boards - I hear a thump. I am sorry, I don't speak Indonesian, so I couldn't figure out some of the stuff you are saying. Can you please help with some instructions on what to test? I suspect the problem is on the lower board, but I am not sure. Thank you
@@ARTaudio440 replacing all 20 or so capacitors would almost be not worth it. Component cost plus work time would exceed buying a similar used amp. Right now, I am suspecting the opamp IC. The fault seems to happen when that is connected. Do you know if those go out often, and how to test them in circuit? Thanks
@andreym.562 hi, I think you are refering to protect IC which is similar to op amp. This type of IC cannot be test. Try replacing it. Also check the emitter of the power output transistor and make it sure that it has no DC out
@@ARTaudio440 in the video, I heard the relay clicking, and I think you determined the transistor next to it is causing it to not switch? Right? When I turn on the power the relay should click right? Or is it a protection relay?
Hi, salamat sa panunuod. Ang speaker in ay jan nyo po ilalagay ang speaker out ng external na amplifier like sakura or kahit anong amp. Tapos sa speaker out naman ay jan mo narin ikakabit ang mga speaker ng amplifier.
Hi, It's a pity this video is not in English or has an English subtitle as I found this to be the perfect video for my subwoofer problem as it shows the very same PCBs. But I can't understand what is going on or why, especially with the capacitor of the input board.
Hi, thank you for watching and my apologies about the language. Those capacitors have leaked and are related to the protection circuit. I suggest doing the physical check for those capacitors and replacing them if possible.
@@ARTaudio440 Thanks for the info, I'll check it out. Do you happen to have a schematic diagram of this board you could send me? I can't find it online anywhere.
Nai on ko sya nag green mga twice pero di ko pa na test kung tumutunog. Tapos now ayaw umilaw yun lights pag ino On. Fuse lang ba problema nun? Same model nyan.
@@ARTaudio440 Nung binuksan ko may mga laruan palang kotse sa loob. yun medyo mabigat na kotse kotsehan, mga lima ata naipon lol Eh di ko naman alam binigay lang sa akin. Posible kaya nag short? Saan ba makabili nun 1.25A na fuse. Sayang naman.
@@ARTaudio440 Kuya last na lol Ok lang ba kung 1A lang yun fuse na ilagay ko kahit 1.25A nakalagay? Bale yun sub lang gamitin ko hinde ko lagyan ng speaker kasi ikabit sa amplifier yun sub. Hinde ba mag blow agad fuse? Meron 1 at 1.5A nilaktawan pa. Yun iba kasi 1.25A nga kaso galing pa china. 😂 size nya 5x20mm
Hi, this subwoofer has no didicated amplifier for speaker, unless this subwoofer is connected to an amplifier with speaker output port. Speaker out from the amp must be connected to input speaker from subwoofer and the speakers box must be connecter to subwoofer output speaker terminal.
Hi, thank you for watching ☺️ My apologies for the video language. The defect of this amp which I encountered was the capacitor that had leaked. My advice is to check some of the capacitors physically.
🚨🚨🚨🚨🛑🛑🛑🛑🛑Hi Sir I have the same subwoofer and ami suddenly does not give me any light and neither green nor red to what is due and if it can be fixed.🛑🛑🛑🛑🎴🎴🎴
🚨🚨🚨🚨🛑🛑🛑🛑🛑Hi Sir I have the same subwoofer and ami suddenly does not give me any light and neither green nor red to what is due and if it can be fixed.🛑🛑🛑🛑🎴🎴🎴
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
Very good po sir. Sir yong sub ko pioneer pag RCA wire gamit ko ok may sound. Pero pag wired na gamit ko econnect sa Input ng sub wl sounds. Sn po may video kyo how to repair or basic trouble shoot sa ganong problem. Thanks sir for sharing your knowledge its a BIG BIG HELP. More power to you keep up the good work and keep safe.
Hi sir,
Thanks for watching ☺️ pag may chance po ay mag blog po ako about connection sa input and output sa amp.
@@ARTaudio440 Thank you po sir☺
Thank you ..Watching your video in milan italy..
Welcome!
Thank you for watching sir☺️
Sir baka pwede ma repair mo yong sa akin..nagoofff yong switch nya..baka pwede
@romeobilog3558 Auto power off po ba sir?
Check nyo po angga capacitor, baka same case lng ng nasa video.
I have the same sub - JBL 200/230. The red light is on, and there is no sound. I checked all the capacitors, and replaced one of the big ones because it had a very slightly raised top. That didn't help. There are no burnt signs on the board. All components visually seem healthy. The only sound I can get, is when I unplug and plug the black connector going between two boards - I hear a thump.
I am sorry, I don't speak Indonesian, so I couldn't figure out some of the stuff you are saying.
Can you please help with some instructions on what to test? I suspect the problem is on the lower board, but I am not sure.
Thank you
Hi, I would suggest to replaced all the electrolytic capacitor for amp board ang preamp board.
@@ARTaudio440 replacing all 20 or so capacitors would almost be not worth it. Component cost plus work time would exceed buying a similar used amp.
Right now, I am suspecting the opamp IC. The fault seems to happen when that is connected. Do you know if those go out often, and how to test them in circuit? Thanks
@andreym.562 hi, I think you are refering to protect IC which is similar to op amp. This type of IC cannot be test. Try replacing it. Also check the emitter of the power output transistor and make it sure that it has no DC out
@andreym.562 In this video I just replaced the small capacitor and small transistor then unit works.
@@ARTaudio440 in the video, I heard the relay clicking, and I think you determined the transistor next to it is causing it to not switch? Right? When I turn on the power the relay should click right? Or is it a protection relay?
I got jbl sub scs 178 I feel likes the sound is not loud even in half volume it hooked up to class D amplifier 300 watt
Hi, try to boost the bass from the amp or source. Thank you for watching ☺️
Bro ask ko lang purpose ng mga Speaker in at speaker out ng JBL sub 260/230 s likod?Hindi naman cya gumagana kapag lagyan ng speaker.
Hi, salamat sa panunuod.
Ang speaker in ay jan nyo po ilalagay ang speaker out ng external na amplifier like sakura or kahit anong amp. Tapos sa speaker out naman ay jan mo narin ikakabit ang mga speaker ng amplifier.
@@ARTaudio440 sàlamat Boss
@@FGEMixVlogs9406 Your welcome idol ☺️
260 watss audio/reciever with 200 watss subwootfer with 5 satellite speakers..match ba ito...thanks r
Hi sir,
Yes po match po ang speaker watts sa audio receiver watts. Good po yan sir kasi konti lng and difference.
Hi, It's a pity this video is not in English or has an English subtitle as I found this to be the perfect video for my subwoofer problem as it shows the very same PCBs. But I can't understand what is going on or why, especially with the capacitor of the input board.
Hi, thank you for watching and my apologies about the language.
Those capacitors have leaked and are related to the protection circuit. I suggest doing the physical check for those capacitors and replacing them if possible.
@@ARTaudio440 Thanks for the info, I'll check it out. Do you happen to have a schematic diagram of this board you could send me? I can't find it online anywhere.
@@whkiess Hi, sorry I don't have schematic diagram.
Nai on ko sya nag green mga twice pero di ko pa na test kung tumutunog. Tapos now ayaw umilaw yun lights pag ino On. Fuse lang ba problema nun? Same model nyan.
Hi, yes posible fuse or merong loose connection.
@@ARTaudio440 Nung binuksan ko may mga laruan palang kotse sa loob. yun medyo mabigat na kotse kotsehan, mga lima ata naipon lol Eh di ko naman alam binigay lang sa akin. Posible kaya nag short? Saan ba makabili nun 1.25A na fuse. Sayang naman.
@@RealTalkMeNow Hi po😅, sa Lazada meron po or direct kayo sa raon quiapo mas low price pag sa raon.
@@ARTaudio440 Kuya last na lol Ok lang ba kung 1A lang yun fuse na ilagay ko kahit 1.25A nakalagay? Bale yun sub lang gamitin ko hinde ko lagyan ng speaker kasi ikabit sa amplifier yun sub. Hinde ba mag blow agad fuse? Meron 1 at 1.5A nilaktawan pa. Yun iba kasi 1.25A nga kaso galing pa china. 😂 size nya 5x20mm
@@RealTalkMeNow Yes po ok lng.
Boss anu po ang problema jbl 10” 250watts ayaw tumaas ang volume nya
Hi sir, pa send po ng picture kasi di pa ako nkakita ng ganyang model at kung ano ang features ng unit. facebook.com/ARTaudio440
Bro ganyang din issue ng subwoofer ko. Baka pwedeng Gawin mo. Same model lang tayo. San Ang location mo?
Hi thanks for watching☺️
Sa Alsadd po ako idol Qatar
Watching
Thank you for watching😊
tol , un saken naman ... me power ... green light ... but still walang kalabog na lumalabas ... fuse lang kaya un ? salamat
Hi, check myo po ang connection ng speaker at ang speaker mismo kung open yung voice coil.
Newbie is watching master
Thank you for watching😊
Plese geve power supply mosfet value
Hi thanks for watching.
This one is transformer type power supply. It has bridge type diode only and regulator.
My 200/230 active sub is protection
Have a jbl 180 subplate and the fuse keeps popping
SA chicks ok yan
I cant get the amplifier out
Hi, this subwoofer has no didicated amplifier for speaker, unless this subwoofer is connected to an amplifier with speaker output port. Speaker out from the amp must be connected to input speaker from subwoofer and the speakers box must be connecter to subwoofer output speaker terminal.
Translation?
Hi, thank you for watching ☺️
My apologies for the video language. The defect of this amp which I encountered was the capacitor that had leaked. My advice is to check some of the capacitors physically.
Hirap nung sakin. No red or green lights pero naka on relay. pero Meron siyang konti tunog na parang kulog.
Hi, salamat po sa panunuod, Double check nyo po mga capacitors.
@@ARTaudio440 thanks po, hinawakan ko po yung 649A transistor at siya ay umiinit. Sana siya po yung problem
🚨🚨🚨🚨🛑🛑🛑🛑🛑Hi Sir I have the same subwoofer and ami suddenly does not give me any light and neither green nor red to what is due and if it can be fixed.🛑🛑🛑🛑🎴🎴🎴
Check also the fuse.
🚨🚨🚨🚨🛑🛑🛑🛑🛑Hi Sir I have the same subwoofer and ami suddenly does not give me any light and neither green nor red to what is due and if it can be fixed.🛑🛑🛑🛑🎴🎴🎴
Hi, check the power supply, transformer and regulator.
Fuse