2012+ Jeep Grand Cherokee SRT-8 Performance Aluminum Radiator Installation Guide by Mishimoto

[@theurbanlifestylechannel2825]

This job can be done without taking the front end apart. I've done it and all you have to do is disconnect the top bracket and the top mount and the Radiator will come out.With the fan.

[@americansforhire5378]

Care to explain

[@AbdullahADFpoint]

maybe this way would make the job smoother and easier as it might make room for things to move around

[@cedricwade4547]

Do you have to take the skid pan off from underneath?

[@theurbanlifestylechannel2825]

@@cedricwade4547 yes

[@joshuasimmons2412]

I need to get one of those! The cheap oem plastic side tanks always start leaking after the car has some miles on them.

[@hdavidarredondo7694]

I forgot to mention that there is locking tab on the upper driver's side of the radiator which also has to be released in order to separate the AC condenser from the radiator.

[@marianobruno7491]

I have a 2014 Jeep grand Cherokee with the hemi 5.7. We find a small leak so we are looking to replace the radiator and I was thinking to use that an excuse for an upgrade. This radiator will fit my jeep? or this upgrade and procedure is only for the srt?
This is a overland 4x4 5.7, with towing package (and clarify because on older modeles the towing package has different radiator, or event the steering goes into the radiator too...)

[@mishimoto]

Please contact us at [e-mail] if you have any fitment or technical questions! Thanks!

[@robfrmny21]

Thanks for making this

[@NICU2]

How many liters of coolant would i need to put in if i put this on my 5.7 overland?

[@mishimoto]

We recommend at least 5 gallons or pre-mixed coolant when installing this radiator.

[@NICU2]

Thanks, i bought it, should be here tonight, I just finished pulling the old one in my 13 overland.

[@donaldsherman1]

They don’t make radiator installs a 45 minute minute job anymore....

[@MultiYungSlim]

Does the same concept work on a 2012 jeep grand cherokee laredo

[@mishimoto]

This will fit the following vehicles:
2011-2015 Dodge Durango 3.6L V6
2011-2015 Jeep Grand Cherokee 3.6L V6
2011-2019 Dodge Durango 5.7L V8
2011-2019 Jeep Grand Cherokee 5.7L V8
2012+ Jeep Grand Cherokee SRT8 6.4L
2018 Dodge Durango SRT 6.4L

[@juniorz71g38]

Will this fit on my supercharged Jeep? My Inter cooler sits in the front will it still fit ?

[@mishimoto]

some slight modification may be required but you should be able to install this on your supercharged jeep

[@0fksgvn185]

Is their a reason they won’t fit a 2011 wk2 ?

[@mishimoto]

We are showing that the OEM part numbers are different. We have not tested this fitment.

[@iechiefcherokee3807]

Will this swap over to a v6 wk2

[@mishimoto]

Fits:
2011-2015 Dodge Durango 3.6L V6
2011-2015 Jeep Grand Cherokee 3.6L V6
2011-2019 Dodge Durango 5.7L V8
2011-2019 Jeep Grand Cherokee 5.7L V8
2012+ Jeep Grand Cherokee SRT8 6.4L
2018 Dodge Durango SRT 6.4L
*This radiator does not fit Trackhawk models

[@mrmike1296]

use my jeep for the next install and video, i want to see difference with a supercharger on there

[@mishimoto]

We usually do prefer to use a stock car so more people can provide better instructions. However we will be sure to reach out if we need another test vehicle.

[@mrmike1296]

@@mishimoto please do, if i get a supercharger i have to take off everything anyway that would be the time to do this, would you like to see my video ?

[@bdog4u2]

Just got this for my 2014 srt grand cherokee and it's way thicker and light as hell.

[@Bekim8310]

Thats a lot of work just to replace a radiator.

[@jeudyhernandez-i4t]

Would it work on a trackhawk

[@mishimoto]

This radiator does not fit Trackhawk models

[@kilo2040]

what stupid design jeep made just to replace radiator

[@jessicacantu5765]

Do I need to reprogram the front radar sensors after this?

[@mishimoto]

Shouldn't need to do this.