Yamaha GP1800R Exhaust Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024
  • 2019 Yamaha GP1800R SVHO Worx Racing Exhaust install WR04028

ความคิดเห็น • 32

  • @cade7458
    @cade7458 3 ปีที่แล้ว +2

    That sounds good

  • @k.tanaka1866
    @k.tanaka1866 3 ปีที่แล้ว +2

    dude i think the stock sounds better than the worx exhaust... i think all that silicone piping muffles the raspiness... imho

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว

      Sounds better in the water under a load. I think I’ll do another vid while on the water so you can hear it 😎

  • @JuanmanuelHernandez-zz5gm
    @JuanmanuelHernandez-zz5gm 2 ปีที่แล้ว +1

    What’s the squeaking sound by the super charger. Mine does that too. Is that normal kinda sound like it’s grinding a little

    • @alec.emery3730
      @alec.emery3730 2 ปีที่แล้ว

      Oh yea I got one to and she fucking whines and the bov helps with protecting it I’ve had a GP for 3 years now and I can tell you I’ve went through 3 superchargers😭

    • @matthewreichelt8692
      @matthewreichelt8692 ปีที่แล้ว

      Add a blow off valve and that unloads the super charger clutch’s as soon as you back off,

  • @joserentasBioh
    @joserentasBioh 2 ปีที่แล้ว

    Nice, question why didn’t you Choose the rear exhaust? I just got my rear exhaust but I’m still debating on what i should do

    • @alec.emery3730
      @alec.emery3730 2 ปีที่แล้ว +3

      People don’t want to drill holes in the exhaust so that when they want to sell it they can bc people who are looking for a jetski want stock

  • @kobuslouw8182
    @kobuslouw8182 ปีที่แล้ว

    Hows the drone on the worx racing exhaust you installed? I installed the same one but cant stand the drone. Any adviceto fix the terrible drone between 1000-4000 revs ?

    • @QuadStar721
      @QuadStar721  ปีที่แล้ว +1

      Not much you can do other than a Riva Racing water box or TDR waterbox. It helps a little and sounds mean🔥check the link below
      th-cam.com/video/ULucENFg-LY/w-d-xo.html

    • @kobuslouw8182
      @kobuslouw8182 ปีที่แล้ว

      @@QuadStar721 Thanks

  • @romanhorvath936
    @romanhorvath936 3 ปีที่แล้ว +2

    I want this done on my 2021 rxtx

  • @SargeISF
    @SargeISF 3 ปีที่แล้ว +2

    Where did you get the battery? I need the extra connectors

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว +2

      The battery part number is 490-2525

    • @SargeISF
      @SargeISF 3 ปีที่แล้ว +1

      @@QuadStar721 Thank you!

  • @ethanmittler3682
    @ethanmittler3682 3 ปีที่แล้ว +1

    You think you can do this install if your jetski is on a floating dock?

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว

      Not sure. You will need access to the back of the ski in order to bolt on the coupler tho. Just depends on how much room you have behind it

    • @ethanmittler3682
      @ethanmittler3682 3 ปีที่แล้ว

      @@QuadStar721 ok thanks. I just wanted a simple riva free flow exhaust. Idk if that’s what u did also

  • @henrythompson5624
    @henrythompson5624 3 ปีที่แล้ว

    When you sure lock tight for want leak you meaning on bolts right or meaning Is silicone

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว

      Blue Loctite was used to keep the bolts from backing out and will help seal it from water leakage

  • @paulharman1439
    @paulharman1439 หลายเดือนก่อน

    You should probably turn your water off and then your ski off. Didn’t really notice much difference with the install. If any at all.

    • @QuadStar721
      @QuadStar721  หลายเดือนก่อน

      Thanks for watching. The on / off is a flip style. I turned it off just didn’t see it on camera.
      For sure tho ski on then water. Water off then ski. 😎

  • @snoochieboochiess
    @snoochieboochiess 2 ปีที่แล้ว +1

    Hey mate, did you put silicon on the outlet flange?

    • @QuadStar721
      @QuadStar721  2 ปีที่แล้ว

      The exhaust came with a flat rubber gasket that goes between the flange an the hull I did use loctite on the bolts though. No leaks

    • @snoochieboochiess
      @snoochieboochiess 2 ปีที่แล้ว

      @@QuadStar721 I used the rubber gasket but also put a bead of silicon & used loctite as well... Can't wait to get it out on the water to hear it!!

  • @LegitVenom
    @LegitVenom 3 ปีที่แล้ว

    Why do you start it for so long without water ?

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว +1

      Hey Jimmy. At the beginning it was just a short run for sound. Motor wasn’t even warm to the touch when I started to work on it😎

    • @roscoadventures2194
      @roscoadventures2194 3 ปีที่แล้ว

      Hey mate what benefits do U get bye putting on exurst system?

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว

      @@roscoadventures2194
      Better throttle response and sounds awesome on the water. Get compliments all the time

    • @roscoadventures2194
      @roscoadventures2194 3 ปีที่แล้ว +1

      Cheers mate I have same ski it's a machine👍

  • @mjethier
    @mjethier 3 ปีที่แล้ว

    riva dusts that. You are under water the majority of the time, hindering performance with what you have. I have the riva waterbox and thru hull. its far far more grunty and just mean.

    • @QuadStar721
      @QuadStar721  3 ปีที่แล้ว

      Yeah.. the stock waterbox is so restrictive. I just got the Riva waterbox, can’t wait to install it 😎