@@bgdgdgdf4488 It's easier to fool a person than to convince them they're being fooled. That better troll? Cause I see a lot of idiots being fooled that think they are too smart to be fooled.
@@Michael-uj2fb what are you even talking about? The "machine" is thermodynamically impossible, I'm just saying that copy pasting the same comment a billion times is stupid
@@СергейСемак-х9й можете тогда сослаться , хоть на одни источник , или документацию , может есть конкретный автор работ ? Я тоже учился в школе и ничего такого не помню
Так точно! Вода с более нижней точки переместиться на более верхнюю точку не может, так как нужно преодолеть гравитацию. На 3.25 секунде была пауза, чтобы включить насос в бочонке
I watched several of those videos in different pipe designs. Now I've found out what is the trick: 1: Install the parts by making some music with your tool. 2: wash your hands and feet to keep it running.
This is a perfect example of “occam’s razor”…(the most obvious explanation is true).. meaning watch the water flow, it doesn’t “pulse” like a hammer pump.. there is no (visual) movement other than him “priming”.. the water flows steady.. there is a Battery powered PUMP inside one of the tall parts.. THAT SIMPLE!! Make this out of CLEAR components.. Then we will talk!
@@bolpiktv7347 yes, BUT there are variables in place.. search “hammer pump”, you will see a “similar” design.. but it uses pressure from moving water and a check valve. Here, it’s standing water and it’s “drawn up” against gravity.. it goes against simple physics
@@robaxelsson530 oh so the water pump in this video is real, sir, not a trick, right?, I think there might be a small dynamo and a small propeller that might be hidden in the small pipe 🤔🤔🤔
@@bolpiktv7347 I don't know but I will put money on it is simpler than that. It is an off the shelf pump. But I don't think this guy is conning.....I think this is meant as a kind of joke.
I suggest that anyone trying to duplicate this "water pump", not permanently glue all the PVC joints together. That's because they will definitely want to return the PVC fittings to the store for a full refund after they repeatedly fail to get this "water pump" to work as indicated in the video. It takes considerable energy input to raise water from a lower level (at the inlet) to a higher level (at the outlet). What is shown in the video is simply not possible without some sort of energy input (like a submersible pump attached to the end of the pipe that is in the pond)... But the video trickery does make for some interesting viewing. Ed Schultheis, PE Mechancal design engineer & manufacturing consultant for 35 years Schultek Engineering & Technology, Inc.
For the skeptics, it is just an automatic siphon, like the one that empties the toilet bowl. The tube in the pond has a check valve on it (the slotted cone) that lets water in the long tube when he pushes down on it and keeps the water in the tube when it is pulled up. Pumping the tube eventually gets it filled with water. The enemy of a siphon is air. All the shaking, tipping, etc is to get the air out of the assembly so the siphon action can take place. The 45 angle and the 90 off the pond pipe form a U-siphon (look it up!). When water gets to that location and tumbles over, it creates a vacuum in the short horizontal pipe between the angle pieces which pulls the next bit of water over the top. As long as air doesn't get in, that vacuum continues to pull water up and over. Gravity helps get it to the output. The wider tube helps create a lower pressure area, encouraging the water flow to continue. It's physics. It looks magical or fake until you understand that. The siphon will empty the lake. When air gets in the slotted cone and rises up to the horizontal piece, it ruins the vacuum and the siphoning stops. Small siphons like this (bell siphons) are used to empty media beds in aquaponics. The horizontal piece is set at the height the owner wants the siphon action to start.
If any of this were true, we wouldn't have Dams, and our energy crisis would be solved. Make up all the little physics rules you want, but you can not get something for nothing. This contraption is clearing pulling water from a lower elevation to a higher one using its own gravity. That is impossible. Siphoning only works if the discharge is lower than the intake, nice try though.
Mr. Cover claims that the inlet flowrate is 500 m3/hr, and the outlet flowrate is 350 m3/hr. It's not correct. The inlet and outlet flowrates should be the same. It is a law of continuity.
How difficult would it be to add a cylinder blocker on a chain below the output to pull, then block off the opening to suck the water through instead of pumping the entire contraption with your arms? Amazing idea though thank you so so much for sharing!
My thought was that you put a tee at the top of the intake and pour water in to fill the journeyways and the close off the top of the tee to maintain your siphoning effect 🤷♂️🤔???
Looks exciting but can't work in real life! The first law of thermodynamics cannot be broken! Energy has to be conserved. My take is that a means of pumping the water is hidden in those two vertical pipes; may be some batteries and a small motor in the suction pipe to turn a small turbine.
I suggest that anyone trying to duplicate this "water pump", not permanently glue all the PVC joints together. That's because they will definitely want to return the PVC fittings to the store for a full refund after they repeatedly fail to get this "water pump" to work as indicated in the video. It takes considerable energy input to raise water from a lower level (at the inlet) to a higher level (at the outlet). What is shown in the video is simply not possible without some sort of energy input (like a submersible pump attached to the end of the pipe that is in the pond)... But the video trickery does make for some interesting viewing. Ed Schultheis, PE Mechancal design engineer & manufacturing consultant for 35 years Schultek Engineering & Technology, Inc.
I believe there must be a pump in one of the larger diameter tubes and in the other batteries with the wires passing through the tubes, so he takes off the cover, turns on the pump and then puts it in the water, the initial movement is to remove the air and so on start pumping.
*Отличная идея. 👍👍👍 Теперь нужно под эту струю воды поставить водяное колесо, соединённое с электрическим генератором.* 😂 И в принципе можно сделать замкнутую систему.
Насосы на гидоударе работают на горных реках. Но это лбман с моторчиком 100% ))) хотя можно поверить ))) прикольно снято . Но он мошенник сукин сын ))) ну чисто поржать хватит )))
Семён, не готовы мы быть другими. Посвяти себя познанию, как растения в пустыне добывают себе воду с огромной глубины? Да и вообще. Как растения пьют, как они поднимают воду с больших глубин, да хоть и с маленьких, и подают её каждому листику, каждой веточке, каждому плоду на огромные высоты. А тут "знатоки" пишут, что этого не может быть". А В.С.Гребенников летал , стоя на чемодане. Все кричали, да и сейчас задницы рвут, что этого не может быть. А когда он ушёл, все его рукописи и изделия изъяли сразу, и увезли. Не готовы. В. Шаубергер разработал супер двигатель на воде, т.ж. участь. Всё запрещено, всё спрятано.
@@АлексН-я2ф Частично Вы правы. Хозяева Мира душат всё передовое и неформальное. Но всё таки большинство явлений в той же природе работает по физическим законам. Те же растения, если коротко, пользуются еффектом каппиляров. Но всё это не является по-сути вечным двигателем. Человек ещё многого не постиг и вряд ли постигнет. А такие гении с большой буквы как Тесла являются,к сожалению, исключением а не правилом... Остаётся надеятся на светлое будущее хотя бы для потомков. Хотя в свете последних событий и всей истории человечества в целом оно, светлое будущее, не наступит никогда.Я не пессимист, как думают многие а реалист. И я не вижу никаких глобальных подвижек к пресловитому свелому будущему. К сожалению. И думаю не я один такой...
@@SSSR69, да, хотелось бы, но радуга растворяется в бытии. Хотя появляются такие Данко, ярким светом своих сердец освещая жизненный путь человека и осторожные человеки готовые, на всякий случай, раздавить эти сердца.
@@nikhilmarathe It is possible that the pump is in the lake or off screen. Such as when he lays the "pump" over, a friend standing on the side of the lake, out of the view of the camera, hooks a hose to the end of the intake and pushes the water through.
Não entendo muito de física mas esse mecanismo não tem lógica, é um mecanismo de energia infinita tentada a milhares de ano sem sucesso,o Carneiro hidraulico funciona bombando sem energia elétrica ,mas tem que ter uma queda d'água para mandar a água pra cima.se eu estiver errado mostrem a lógica por trás disso.
У меня первая мысль была если есть такая штука то зачем строить ГЭС а вторая если бы это работало то китайцы наделали бы всяких погремушек на этом эффекте
I think It will only work if the water level is above the exit level, and water pressure would push the water out. In this system, if it works, it may be for limited time, until the forces balance out. Seems interesting, I am curious to build one. If it woks indefinitely it would be a good electric generator from the falling water.
I'm happy unlike the older times the comments have people who immediately point out this is a scam. This is really sad as it's misguiding people who may not be educated
Definitely the outlet of an electric AC pump is connected to inlet of this piping structure Perpetual machines is a good concept but in reality due to internal friction the motion will gradually come to an equilibrium
Buenos días soy de Guatemala me gusta su idea para sacar agua buen video mi pregunta es cuánto puede llegar de alto para q salga el agua para riego gracias saludes desde Guatemala
Except he'd have to muscle it in and out of the pond every five minutes. It's not "free" energy, it's human-powered. It works on siphoning principles, like a ram pump or the assassin's teapot.
Editing cut at 8-9 seconds. Methinks an electric pump got put on the water side end. Mechanical work doesn’t happen for free, otherwise this guy just solved 100% of the clean energy transition with some PVC pipes.
Still appreciate that the guy’s got 7.7M views on the internet. His hardware might defy physics, but the man knows how to get paid for making a viral video!
Wow, these guys are brilliant video editors - quite flawless I might say. I'd like to learn how to edit videos like this. Thing though is, while he's trying to prime the unit, somewhere around 3:25, if you observe the cows in the background, one cow magically jumps from its friends and appears further to the left; could that be what is called time travelling?
a new project, you have helped a lot of people without electricity to still pump water but scientists don't know, you have invalidated the laws of physics, your project should be awarded an international award, you make the water column higher than 3m, then run a generator, get free electricity and sell it to households for money, you just need to pump a few, soon become a billionaire.
@@fat-felipecandido3595 realmente parece Man, só que so 1 válvula de retenção na ponta e o fluxo ele fez empurrando ela na água pra dar pressão pra abrir e fechar ela.
The entire device did not remain in the video frame for the entire time. Hard to say if this magician wasn't doing other things with helpers outside of the camera view.
Is it just acting as a syphon? I think once you got it primed (once the water is filled up to the highest point it creates suction as it fall down into the first big tube.) As long as the outlet is lower than that highest point, I believe this would work, as there is a pressure head due to the height difference of the two top pipes. Pretty cool.
@@rafaelbarreto5833 I completely disagree. The outlet must be lower than the highest part of the closed system. Pretend we have a small piece of hose and we are trying to drain a pool. One end of the hose(inlet) can be at the bottom of the pool. If we hang to hose over the side of the pool, and only down half way on the outside. I can still suck on the outlet to creating the negative pressure necessary to draw the water up and over the side of the pool. Once gravity takes over, it creates its own vacuum due to the falling water.
@@boblee37 In the case of your example I agree with you that the water would flow, but that is because the water level in the pool is higher than the outlet height, therefore doesn't matter if the hose is at the bottom or at the top of the pool, as long it is under water. Nevertheless, in the case of the video the outlet is clearly higher than the water level in the lake.
No, as a Syphon has to have a lower output than input causing more weight of water on the output side. The higher weight due to gravity will suck the water from the higher side. This can't work in the opposite direction as they are pretending it does here.
@@boblee37 The output end of the hose will need to be lower than the depth of the hose in the pool. If you lift the output side to the level of the hose in the pool the water will stop flowing. This is called the point of equilibrium.
Nice cut at 8 seconds. Edit: Oh, I see the second time you play the clip you cut it. I'm guessing you've either got a submersible pump in the first big PVC tube, or someone connected a hose to it off to the right-hand side as you were kick-starting it. I expect it to be a pump because I don't see ripples in the water. Edit 2: Okay, I see the lack of hose at the end. It's possible the fitting you used is concealing something but it's looking more like an internal pump.
@@observer950 Nope. There's way too much water coming out for it to be siphoned out of the bigger chambers, and you'd expect it to slow down as they empty. Also at 3:10 he puts a pipe on the end and the water continues moving. That's not how siphons work. What's actually seeming to happen is he primes the pump by ramming the contraption into the water and then it can pump until he takes it out again.
The teleporting cow at 3:20 over his right shoulder is all I needed to see… plus for a siphon you need to have a drop from input to output, if this was real why not have 1000x of them on generators pumping out free electric without the use of a massive dam creating the elevation difference?
Nice, very nice..! Well done, a hydraulic pump with no moving parts.. did you do any tests to see the distance it can pump the water and what pressure you can get?
Делайте как он. Клея побольше и длины выдерживайте точно. И не забудьте в невидимый конец трубы подключить шланг садового насоса. Все получится! Задорнов был прав.
Imagine it would work... I eould make cascade of it in my garden, then make small hydropower electric station and have endless electricity power source.. how nice it would be... :)
This is just clever camera editing and a well-done video splice. In order for this machine to work, the output needs to be at a lower level than the input.
@@johnruckman2320 *nice joke. ... I didn't saw any pump in this video. This is a fake project. He is getting likes only. He shown a perpetual motion machine. That is not possible.* 😂 🤣
The best thing is in the thumbnail. He is claiming 500m^3/h in and 350m^3/h out. That 150m^3/h must be converted into the energy that pushes up the water.
I make high power electric stove from a Magnet => th-cam.com/video/o5MHR0_osrM/w-d-xo.html
Сколько чудес для необразованного человека.
th-cam.com/video/W_Udgg0QgOw/w-d-xo.html
Wow, i have a simular system and its working, not so much as told but i get at least 10 liters a minute from it.
Bah!
Eres Fake compadre. No mereces tener un canal engañando a la gente.
The hard part about building a perpetual motion machine is knowing where to hide the battery.
The hard part about writing a youtube comment is trying to be original
@@bgdgdgdf4488 It's easier to fool a person than to convince them they're being fooled. That better troll? Cause I see a lot of idiots being fooled that think they are too smart to be fooled.
@@Michael-uj2fb what are you even talking about? The "machine" is thermodynamically impossible, I'm just saying that copy pasting the same comment a billion times is stupid
@@bgdgdgdf4488 Thank you for your participation.
@bgd gdgdf so if I write: "the earth is round" to a flat-earther on the internet Im the stupid one? or am I just stating a fact?
В одном боченке насос, а в среднем аккумулятор. :)
Я тоже так подумал.
Всё мы в школе учились.
Ну не может вода сама по себе течь вверх🤔
@@АлексейФедоровский-п3л Хренова вы в школе учились. Эту систему ещё советский инженер разработал
@@СергейСемак-х9й можете тогда сослаться , хоть на одни источник , или документацию , может есть конкретный автор работ ? Я тоже учился в школе и ничего такого не помню
@@ВасилийСкляров-ь4з спроси что попроще, давно я учился
Так точно! Вода с более нижней точки переместиться на более верхнюю точку не может, так как нужно преодолеть гравитацию.
На 3.25 секунде была пауза, чтобы включить насос в бочонке
I watched several of those videos in different pipe designs. Now I've found out what is the trick: 1: Install the parts by making some music with your tool. 2: wash your hands and feet to keep it running.
00:07 that's the cut when the other guy connects the hose to the other end.
yes
Well spotted 🤣🤣🤣 even hairstyle changed
Nicely done
03:25 1 cow in the back yard was disepear
There's no trick. It's a simple hydraulics principle called gravity pump.
Would be better if you could demonstrate it with clear/transparent tubing
But then, the trickery is exposed, yes?
Yea, is it goi g to run for 20 seconds.
Agreed. They should show the hidden pump and battery inside the capped tube.
Up
@@ivanf4023
Slažem se, još mu samo fali turbinica pa bi bilo i struje…😁
Молодец. Главное умно спрятал насос😂
А что его прятать? В большой трубе аккумуляторный насос стоит
This is a perfect example of “occam’s razor”…(the most obvious explanation is true).. meaning watch the water flow, it doesn’t “pulse” like a hammer pump.. there is no (visual) movement other than him “priming”.. the water flows steady.. there is a Battery powered PUMP inside one of the tall parts.. THAT SIMPLE!!
Make this out of CLEAR components.. Then we will talk!
Sir, is it really able to pump water without a propeller?🤔
@@bolpiktv7347 yes, BUT there are variables in place.. search “hammer pump”, you will see a “similar” design.. but it uses pressure from moving water and a check valve. Here, it’s standing water and it’s “drawn up” against gravity.. it goes against simple physics
@@robaxelsson530 oh so the water pump in this video is real, sir, not a trick, right?, I think there might be a small dynamo and a small propeller that might be hidden in the small pipe 🤔🤔🤔
@@bolpiktv7347 I don't know but I will put money on it is simpler than that. It is an off the shelf pump. But I don't think this guy is conning.....I think this is meant as a kind of joke.
there is a valve in the pickup head, looks like a simple one way valve plastic seated thing
В мутной воде не видно, как кто-то к трубе насос подсоединяет.
Скорее всего внутри кумулятрик какой-то стоит
Я тоже так думаю 👍👍👍
@@Atlant-f5b в одной полости стоит насосик, а во второй - аккумуляторик. Видео создано для повышения продаж у вьетнамского полипропиленового завода.
Urraaa... there is a submersible pump in the rough water.. good job friends..😎
@@РОБИН_из_ВЕГДАлэнда вот здравомыслящий человек
I suggest that anyone trying to duplicate this "water pump", not permanently glue all the PVC joints together. That's because they will definitely want to return the PVC fittings to the store for a full refund after they repeatedly fail to get this "water pump" to work as indicated in the video. It takes considerable energy input to raise water from a lower level (at the inlet) to a higher level (at the outlet). What is shown in the video is simply not possible without some sort of energy input (like a submersible pump attached to the end of the pipe that is in the pond)... But the video trickery does make for some interesting viewing.
Ed Schultheis, PE
Mechancal design engineer & manufacturing consultant for 35 years
Schultek Engineering & Technology, Inc.
Нужно было ещё приделать сгоревший компрессор от холодильника ,а то что то плохо воду качает 🤣
Да да. А я подумал о свечах зажигания и магните .
@@rasha.idi.na.xu. похоже это новая модель,индотурбососнасос называется
Без свинособачих висерів не обійшлося!
внутри и так насос на аккуме
@@IvanIvanov-dobry или под водой шланг подключен.
For people with education.or common sense, they know this will never work,so its for show only to get sibscribers
Then how did the Mayans have running water before the Spanish arrived?
How sure are you , have you tried it ?
I am a civil engineer ang teaching hydraulics in a university. Water will not flow against the full of gravity. Except, a pump is used.
@@germanbarlis8544 let us learn to appreciate the inversions of other people. To me this looks like a water pump replacement.
โยม
ห
For the skeptics, it is just an automatic siphon, like the one that empties the toilet bowl. The tube in the pond has a check valve on it (the slotted cone) that lets water in the long tube when he pushes down on it and keeps the water in the tube when it is pulled up. Pumping the tube eventually gets it filled with water. The enemy of a siphon is air. All the shaking, tipping, etc is to get the air out of the assembly so the siphon action can take place. The 45 angle and the 90 off the pond pipe form a U-siphon (look it up!). When water gets to that location and tumbles over, it creates a vacuum in the short horizontal pipe between the angle pieces which pulls the next bit of water over the top. As long as air doesn't get in, that vacuum continues to pull water up and over. Gravity helps get it to the output. The wider tube helps create a lower pressure area, encouraging the water flow to continue. It's physics. It looks magical or fake until you understand that. The siphon will empty the lake. When air gets in the slotted cone and rises up to the horizontal piece, it ruins the vacuum and the siphoning stops. Small siphons like this (bell siphons) are used to empty media beds in aquaponics. The horizontal piece is set at the height the owner wants the siphon action to start.
Well explained
If any of this were true, we wouldn't have Dams, and our energy crisis would be solved.
Make up all the little physics rules you want, but you can not get something for nothing.
This contraption is clearing pulling water from a lower elevation to a higher one using its own gravity. That is impossible.
Siphoning only works if the discharge is lower than the intake, nice try though.
the output of syphon has to be at least 1 mm below the input. here is not the case. fake.
may i know what the purpose of the two vertical pipes is?
why don't people use a version of this system to circulate water in a fountain stead of using an electric pump?
Mr. Cover claims that the inlet flowrate is 500 m3/hr, and the outlet flowrate is 350 m3/hr. It's not correct. The inlet and outlet flowrates should be the same. It is a law of continuity.
Your research is good, but it will last only for least than an hour
We want a none stop self pump, thank you
For 500 m3/hr flow, pipe size should be much larger.
Exactly Bernoulli's theorem Q-in =Q out
But notice that in youtube land... A small amount of bullshit in will produce many more times bullshit out. Genius!
0:07 Водолаз подключил к трубе шланг под водой.
👍
Средний бак можно было сделять и побольше. Чтобы патареек хватало на долго
Hazlo transparente, que se vean las baterias y el motor ocultos en los dos cilindros grandess
Там гораздо проще. На склейки кадров, подсоеденили шланг со стороны озера.
Si eso mismo digo yo
How difficult would it be to add a cylinder blocker on a chain below the output to pull, then block off the opening to suck the water through instead of pumping the entire contraption with your arms? Amazing idea though thank you so so much for sharing!
Vc não pronto para venda, gostaria de compra-la
Vc não tem pronta?
My thought was that you put a tee at the top of the intake and pour water in to fill the journeyways and the close off the top of the tee to maintain your siphoning effect 🤷♂️🤔???
@@stevekluesner4430 it's fake, a clear edit at 3:20 ish. Watch the cows in the background.
😲 wow Nice 👍 galing na Man paggawa 👍👍👍😲😲😲🌹❤️
如果是利用水錘效應的話，出水端不會平緩流暢，會有類似脈動的流量差產生
你相信有可能吗 水是由空气擠出来的 问题在水只往前擠不往后擠吗。有答案请告诉我
@@khmerdara6342 你說到重點了，缺少2個以上的逆止閥和水錘應有的脈沖現象所以我並不認為這個設備可以運作。
Bên trong ống nén đó là 1 máy bơm mini, video chỉ có tính chất câu line
Looks exciting but can't work in real life! The first law of thermodynamics cannot be broken! Energy has to be conserved. My take is that a means of pumping the water is hidden in those two vertical pipes; may be some batteries and a small motor in the suction pipe to turn a small turbine.
u can try with bowl n water n straw, u need do kinetic job up n down until water come out
You obviously have internet. Look up ram pumps.
@@roberto3262 no this is not ram pump
@@roberto3262 need two check valves and an outlet BENEATH the inlet water head line, for a ram pump.
Yes
Он забыл поставить генератор под струю, чтобы вырабатывать пару мегаватт электричества 😂
Wow this guy succeeded in creating a lot of free energy in the comments 😂
Congratulations, you are the first to create a perpetual motion machine. I almost succeeded.
😂🤣👍
👎 *In 10 days 2500000 views with a fake video.* 🤣🤣
😂😂
*He is waisting public's time.*
Perfect device for water collection while living off-grid. Thank you for the money saver!
Right lol, let me know how it works for you.
Spoiler, it won't
I suggest that anyone trying to duplicate this "water pump", not permanently glue all the PVC joints together. That's because they will definitely want to return the PVC fittings to the store for a full refund after they repeatedly fail to get this "water pump" to work as indicated in the video. It takes considerable energy input to raise water from a lower level (at the inlet) to a higher level (at the outlet). What is shown in the video is simply not possible without some sort of energy input (like a submersible pump attached to the end of the pipe that is in the pond)... But the video trickery does make for some interesting viewing.
Ed Schultheis, PE
Mechancal design engineer & manufacturing consultant for 35 years
Schultek Engineering & Technology, Inc.
I suspect one of the big pipes hides a pump
I believe there must be a pump in one of the larger diameter tubes and in the other batteries with the wires passing through the tubes, so he takes off the cover, turns on the pump and then puts it in the water, the initial movement is to remove the air and so on start pumping.
Bingo!
Thats call sciene bro,
No its because of pressure it is pulling the water
@Thomas Y Setiadi did you try? What the result?
@@roberto3262 lol, this is not ram pump, it require source to be higher than the pump itself
You have more chance of hitting the moon with an apple than this working in real life.
I thought it was a ram pump
I've wasted a bag of apple's 🤣
@@ronaldojeanty8706 It's not a ram pump. No energy input.
*Отличная идея. 👍👍👍 Теперь нужно под эту струю воды поставить водяное колесо, соединённое с электрическим генератором.* 😂
И в принципе можно сделать замкнутую систему.
Как это может работать?!
Там моторчик стоит
@@KarenGoman никак. Мухлюют.
В Европе патенты на вечный двигатель перестали принимать еще пару сотен лет назад...
Насосы на гидоударе работают на горных реках. Но это лбман с моторчиком 100% ))) хотя можно поверить ))) прикольно снято . Но он мошенник сукин сын ))) ну чисто поржать хватит )))
question, why did you stop the video 1:37, and then continue new video right after? You could have added small ct-pump in the pressure pump.
It could have batteries inside the first chamber and a small pump in the second chamber so it sucks the water, the switch is the water.
To hide the pump & battery
PVC pipe into a free water pump and it worked 👍👍👍👍👍👍👍👍
@@anisoareciobanu588 ok
Vreau si eu Nr de telefon sa- u adresa in ce limba se traduce si vreau si dimensiunile la fiecare piesa si denumirea la fiecare piesa .Multumesc
@@anisoareciobanu588 ok
Thật sự thì nó có hoạt động được không vậy bạn
Que bonito todo eso, cuando se acabe la batería se acabó el cuento 😂😂😂
Use a transparent tubings to see the real water flow
Если бы было всё так просто - Мир давно бы был другим...
👍💐
Семён, не готовы мы быть другими. Посвяти себя познанию, как растения в пустыне добывают себе воду с огромной глубины?
Да и вообще. Как растения пьют, как они поднимают воду с больших глубин, да хоть и с маленьких, и подают её каждому листику, каждой веточке, каждому плоду на огромные высоты. А тут "знатоки" пишут, что этого не может быть".
А В.С.Гребенников летал , стоя на чемодане. Все кричали, да и сейчас задницы рвут, что этого не может быть. А когда он ушёл, все его рукописи и изделия изъяли сразу, и увезли. Не готовы.
В. Шаубергер разработал супер двигатель на воде, т.ж. участь. Всё запрещено, всё спрятано.
@@АлексН-я2ф Частично Вы правы. Хозяева Мира душат всё передовое и неформальное. Но всё таки большинство явлений в той же природе работает по физическим законам. Те же растения, если коротко, пользуются еффектом каппиляров. Но всё это не является по-сути вечным двигателем. Человек ещё многого не постиг и вряд ли постигнет. А такие гении с большой буквы как Тесла являются,к сожалению, исключением а не правилом... Остаётся надеятся на светлое будущее хотя бы для потомков. Хотя в свете последних событий и всей истории человечества в целом оно, светлое будущее, не наступит никогда.Я не пессимист, как думают многие а реалист. И я не вижу никаких глобальных подвижек к пресловитому свелому будущему. К сожалению. И думаю не я один такой...
@@SSSR69, да, хотелось бы, но радуга растворяется в бытии. Хотя появляются такие Данко, ярким светом своих сердец освещая жизненный путь человека и осторожные человеки готовые, на всякий случай, раздавить эти сердца.
Amazing Bro❤ Tuyệt vời 😮❤
It would be amazing to see it in action if this has see-thru pipes or transparent tubing.
That would reiveal his hidden moter .
@@nikhilmarathe motor.
@@timhallas4275 thanks for correction.
No it wouldn't be amazing, it'd be boring because nothing would happen
@@nikhilmarathe It is possible that the pump is in the lake or off screen. Such as when he lays the "pump" over, a friend standing on the side of the lake, out of the view of the camera, hooks a hose to the end of the intake and pushes the water through.
It works also as a filter, muddy water turned into clear water, amazing bro🤣🤣😊
I suggest you to clean your brain with this🤭
Best world record invention
All fake
And it didn't make you wonder how he did that?
Or are u being sarcastic? If Yes, ✌✌✌... 😂
@@erranti07 the latter 😁😁😜
@@erranti07 I am🤣🤣🤣
I bet you knew what I said✌️😊
That’s basically just like a RAM pump in a different format 😊👍
You have either violated the laws of physics, or there is a hidden pump inside that machine.
It is possible if you dig the pipe down and make use of pulsation affect however you must have the way to get rid of excess water.
Where did you hide battery &motor?
up yo a**
😁😁😁
Don't need battery or motor..
It's only physic
@@AdanSirbat what physic law can get this? 😂😂😂
Não entendo muito de física mas esse mecanismo não tem lógica, é um mecanismo de energia infinita tentada a milhares de ano sem sucesso,o Carneiro hidraulico funciona bombando sem energia elétrica ,mas tem que ter uma queda d'água para mandar a água pra cima.se eu estiver errado mostrem a lógica por trás disso.
Eu também gostaria de saber
Realmente isso, energia infinita = falso
Não vai funcionar
Ele faz vídeos fakes para ter visualizações
Wow...this invention defy all laws of physics!!! The inventor should get a Nobel prize
Это же вечный двигатель, ставь каскады с генераторами и электроэнергия бесплатно. Что то тут не так.
У меня первая мысль была если есть такая штука то зачем строить ГЭС а вторая если бы это работало то китайцы наделали бы всяких погремушек на этом эффекте
@@ИварШефер вот ща ки тайци посмотрят и наделают если это работает)))
I think It will only work if the water level is above the exit level, and water pressure would push the water out. In this system, if it works, it may be for limited time, until the forces balance out.
Seems interesting, I am curious to build one. If it woks indefinitely it would be a good electric generator from the falling water.
It would basically be a perpetual motion machine if it worked.
If the inlet is alawys under water and no debris block it, it should work unstopdly. It's a simple hydraulics principle called gravity pump.
@@ulissesbertoldo No it's not. A gravity pump has an energy input, this has none.
I'm happy unlike the older times the comments have people who immediately point out this is a scam. This is really sad as it's misguiding people who may not be educated
If it really works then very good 👍.
But what is the principle behind it?.
Make it in transference piping so every one will put their efforts.
Raj, принцип гидроудара и мааааленькой пружинки.
Se funcionar mesmo essa ideia é muito boa pra oxigenação de tanque de peixes
Tudo armação, não tem como funcionar, é como se fosse um truque ok
Isso é fake!!
Definitely the outlet of an electric AC pump is connected to inlet of this piping structure
Perpetual machines is a good concept but in reality due to internal friction the motion will gradually come to an equilibrium
TEM GENTE QUE VAI ACREDITAR QUE É POSSÍVEL MOVIMENTO PERPÉTUO
Eu acreditava....
@@mariachaves5345 sim no passado, mas nao agora
Nossa quanta vazão hein kkk
Двигатель хорошо спрятали😂😂😂
Нет
A well deserved innovation which will go along way in helping third world countries
The man who can defy physics law.......
the man who has a first gulp of physics and had a drum of impossibilities
Yes I built one and it works so well.
Stop the cap
i like good man
Buenos días soy de Guatemala me gusta su idea para sacar agua buen video mi pregunta es cuánto puede llegar de alto para q salga el agua para riego gracias saludes desde Guatemala
Всё зависит от мощности насоса
Amazing! Does it desalinate too? Ooh, and if you connected a water-wheel generator to the output flow, you could also have UNLIMITED electricity!
😂
🤣
Except he'd have to muscle it in and out of the pond every five minutes. It's not "free" energy, it's human-powered. It works on siphoning principles, like a ram pump or the assassin's teapot.
Видео нарезанное итприсутствую склейки, монтаж. Я увидел 2 склейки, как раз перед тем, когда вода начинает течь непрерывно. Это фэйк.
Конечно фейк, там все в этих резервуарах, и помпа и питание. Так красиво конечно 😉👍
Editing cut at 8-9 seconds. Methinks an electric pump got put on the water side end. Mechanical work doesn’t happen for free, otherwise this guy just solved 100% of the clean energy transition with some PVC pipes.
Still appreciate that the guy’s got 7.7M views on the internet. His hardware might defy physics, but the man knows how to get paid for making a viral video!
Wow, these guys are brilliant video editors - quite flawless I might say. I'd like to learn how to edit videos like this. Thing though is, while he's trying to prime the unit, somewhere around 3:25, if you observe the cows in the background, one cow magically jumps from its friends and appears further to the left; could that be what is called time travelling?
Definitely saw that 😂😂
most of stupid stuff bro
Editannya masih kasar, sangat jelas terpotong
@@jihadislam8934 Jika sapi tidak ada di sana, itu akan menjadi sempurna meskipun
Yes you are right bhosidi ka chutiya bana raha hai aur uska masum chehra dekho lagata hai such main kiya hai kaam
Wow! A perpetual motion machine!
a new project, you have helped a lot of people without electricity to still pump water but scientists don't know, you have invalidated the laws of physics, your project should be awarded an international award, you make the water column higher than 3m, then run a generator, get free electricity and sell it to households for money, you just need to pump a few, soon become a billionaire.
And you don't need to push in to water, whatever water comes out. You just need one switch to charge water to fuel. 🤣
500m³/h that's 500,000liter/hr!!
🤭dreaming
Resolveu o problema de energia do mundo ¬¬.. Ciclo de movimento perpétuo. Fisicamente impossível.
E como funcionou se é impossível? Parece uma bomba carneiro, mas não... Uma hora deve parar de sair água se diz né
Também tenho 99,999999% de certeza que não funciona!
@@fat-felipecandido3595 realmente parece Man, só que so 1 válvula de retenção na ponta e o fluxo ele fez empurrando ela na água pra dar pressão pra abrir e fechar ela.
@@fat-felipecandido3595 mais eu ainda aconselho a bomba carneiro kkkkkkk mais garantido
The entire device did not remain in the video frame for the entire time. Hard to say if this magician wasn't doing other things with helpers outside of the camera view.
Is it just acting as a syphon? I think once you got it primed (once the water is filled up to the highest point it creates suction as it fall down into the first big tube.)
As long as the outlet is lower than that highest point, I believe this would work, as there is a pressure head due to the height difference of the two top pipes.
Pretty cool.
No, it wouldn't work since the outlet is higher than the inlet. For it to be a syphon the opposite should be true, outlet lower than the inlet.
@@rafaelbarreto5833 I completely disagree. The outlet must be lower than the highest part of the closed system.
Pretend we have a small piece of hose and we are trying to drain a pool. One end of the hose(inlet) can be at the bottom of the pool.
If we hang to hose over the side of the pool, and only down half way on the outside. I can still suck on the outlet to creating the negative pressure necessary to draw the water up and over the side of the pool. Once gravity takes over, it creates its own vacuum due to the falling water.
@@boblee37 In the case of your example I agree with you that the water would flow, but that is because the water level in the pool is higher than the outlet height, therefore doesn't matter if the hose is at the bottom or at the top of the pool, as long it is under water. Nevertheless, in the case of the video the outlet is clearly higher than the water level in the lake.
No, as a Syphon has to have a lower output than input causing more weight of water on the output side. The higher weight due to gravity will suck the water from the higher side. This can't work in the opposite direction as they are pretending it does here.
@@boblee37 The output end of the hose will need to be lower than the depth of the hose in the pool. If you lift the output side to the level of the hose in the pool the water will stop flowing. This is called the point of equilibrium.
Nice cut at 8 seconds.
Edit: Oh, I see the second time you play the clip you cut it. I'm guessing you've either got a submersible pump in the first big PVC tube, or someone connected a hose to it off to the right-hand side as you were kick-starting it. I expect it to be a pump because I don't see ripples in the water.
Edit 2: Okay, I see the lack of hose at the end. It's possible the fitting you used is concealing something but it's looking more like an internal pump.
Idiot it's a foot valve at the end it's a simple siphoning
@@observer950 Nope. There's way too much water coming out for it to be siphoned out of the bigger chambers, and you'd expect it to slow down as they empty. Also at 3:10 he puts a pipe on the end and the water continues moving. That's not how siphons work. What's actually seeming to happen is he primes the pump by ramming the contraption into the water and then it can pump until he takes it out again.
Bernauli principle says inlet discharge and out let discharge is equivalent but the pressure is different. But I admire your talent
AMAZING I SUCCESSFULLY CREATE 1 SAME SET THAT IS AMAZING💥💥💥💥💥💥
You really did go out of your way to make this fake comment huh?
Покажи, какой насос в проходной тубе. И в глухой тубе какая батарея?
This guys is came from planet MARS.. You have a big brain. In your planet
In Brazil it is known as mechanical sheep, but it needs a slope for it to work,😁👍🇧🇷
Notice the water pumping out is crystal clear while the pond itself is quite murky.
Малатси Рахмат укам
The battery is in the "pressure tank" and the pump is in the "inlet tank", with wires running through the pipe. He only has to prime it for it to go.
Nice video 👍
Fake
The teleporting cow at 3:20 over his right shoulder is all I needed to see… plus for a siphon you need to have a drop from input to output, if this was real why not have 1000x of them on generators pumping out free electric without the use of a massive dam creating the elevation difference?
Can't hide the pump sound though 😂
the pump is submerged in the tank and there is music... better example is here : th-cam.com/video/9NHVmOchAgI/w-d-xo.html
Nice, very nice..! Well done, a hydraulic pump with no moving parts.. did you do any tests to see the distance it can pump the water and what pressure you can get?
this video edit already..the pump like real but not.. this video already edit to skip the connection the pump.. in the water have connection water
@@marvedavid4104 ok, makes sense.. 👍
สามารถทำงานได้ในช่วงระยะเวลาสั้นๆ การเติมน้ำเข้าท่อด้วยวิธีเย่าเขย่าให้น้ำเข้ามาในถังลม 2 ถัง อากาศจะถูกอัดให้มีแรงดันสูงขึ้น และสามารถเบ่งตัวดันน้ำออกปลายท่อได้ แต่ระยะเวลาเพียงสั้นๆ การไหลของน้ำก็จะหยุดลงเมื่อแรงดันอากาสที่สะสมตอนแรกเขย่าท่อนั้นหมดลง...
Bangsat lo gw udh ngikutiin tapi gak ada hasilnya totngenlah
I love this video, make my imajination rises..
Делайте как он. Клея побольше и длины выдерживайте точно. И не забудьте в невидимый конец трубы подключить шланг садового насоса. Все получится!
Задорнов был прав.
Ông tháo bung ra tại chổ xem . Chứ tồi không tin , tôi nghĩ bình áp kia là pin , bình còn lại là máy bơm
Works great !!! I made some extras.
I’ll let them go for $300 each.
wow... new ideas👍👍👍
Pls remake with transparent pipes to see how it's work ..
Don't work. Because how to hide pump
Imagine it would work... I eould make cascade of it in my garden, then make small hydropower electric station and have endless electricity power source.. how nice it would be... :)
It defies logic but if it's really working, then that's one great innovation
The most risky part of this vidio is hiding people out of frame...
Отличный фейк. А еще лучше, комментаторы восхищающиеся этим🤣🤣🤣
This is just clever camera editing and a well-done video splice. In order for this machine to work, the output needs to be at a lower level than the input.
You dont even know how that works you just say something that isnt true
wow. amazing idea 👍👍👍
*hahaha....* 🤣😂🤣😂🤣🤣🤣😂😂😂
*What idea you get from this video? Please let us know?*
@@BS-yy8ur modified hydraulic ram pump.
@@johnruckman2320 *nice joke. ... I didn't saw any pump in this video. This is a fake project. He is getting likes only. He shown a perpetual motion machine. That is not possible.*
😂 🤣
@@BS-yy8ur ah, so you didn't bother to look up the original I mentioned. They've been in use a long time.
@@johnruckman2320 *no dear sir, this is not possible. Video makers shouldn't waist other people's time.*
Bravo 👍
Nice bro...full of jokes. Suitable for another planet. Thanks!
has anyone tried to replicate this? What head height can it overcome? Can the flow rate be improved by using longer PVC pieces in the middle ?
I think that's where it comes from. I'm going to try to make it this weekend
@@neilhibbard519 record the process.
@@neilhibbard519 Did it work brother?
Nice , please state what components are in detail
Look up how to make a ram pump there's step by step videos on how ram pumps work and how to make them
World Energy Problems solved. Nobel Prize incoming.
que maravilha parabéns sensacional.. Vc conseguiria dar as medidas das peças por parte ?
он даже не понял что изобрёл вечный двигатель 😂
Гидравлический таран. Старо как мир. В википедии есть схема.
В 1772 году англичанин Джон Уайтхёрст изобрёл и построил «пульсирующий двигатель». А совки в 1939 украли идею и выдали за свою.
@@danielwilson7567
Кто такие совки, что за сволочи?
@@DICYI_JAN совки - это фашисты которые живут в рашке. А рашка - это мордор, чтоб ты не переспрашивал
@@danielwilson7567 а Мордор что такое?
The best thing is in the thumbnail. He is claiming 500m^3/h in and 350m^3/h out. That 150m^3/h must be converted into the energy that pushes up the water.
Agora aqui podemos nós, chamarmos de gênio.
Não, esse negócio é fake
Would you share more about the inlet filter valve
Hay quá minh se làm theo thoi nhung ko biet dc ko cảm on anh truóc rat nhieu