How to refill spray can (make an aerosol can spray again) using portable air compressor

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ต.ค. 2024
  • Get a $5 credit when you buy a $50 eGift card (end on 7/10/23): amzn.to/44rqAXq
    You can get a similar one from amazon : amzn.to/2X6mJ0U
    12v or 110 v air compressor: amzn.to/3iyQzE5
    Check out Mint Mobile and save $: fbuy.me/unsMH
    Join Honey: www.joinhoney....
    Earn high interest: www.marcus.com...
    try amazon prime video: amzn.to/3DNK4cr
    (paid link)
    If you have a tire inflator, you can refill any aerosol spray can with air yourself. It works and you from wasting.
    click the like button if you like it. Thank you.
    If you have a tire inflator, you can refill any aerosol spray can with air.
    #spraycan
    #spraycanpaint
    #refill
    #spraypaint
    #spray
    #spraycans
    #spraypaints

ความคิดเห็น • 29

  • @shadetreeprofessor5723
    @shadetreeprofessor5723 3 ปีที่แล้ว +7

    Awesome, my guy! I've seen others that go over the whole thing, but now that I see this, it looks like stuff I already have.

  • @evahle
    @evahle 2 ปีที่แล้ว +2

    I'll try that. If it works for me it's a lot better than the other methods I've seen on TH-cam. Thanks!

  • @GeorgeNadaYT
    @GeorgeNadaYT 4 ปีที่แล้ว +5

    Nice tip on refilling the can👍

  • @cessealbeach
    @cessealbeach 3 ปีที่แล้ว +11

    To be safe 80 PSI, be sure to wear safety glasses and heavy duty hand gloves

    • @NotJoseO
      @NotJoseO 3 ปีที่แล้ว

      And ear protection

  • @chipsotool
    @chipsotool ปีที่แล้ว +4

    scary that it might blow

  • @nmartin5551
    @nmartin5551 5 หลายเดือนก่อน

    Where is the profanity that I use when I have a mostly full can with no air pressure? This man is a stoic. I’ve seen this done using a Tire valve held down over the top of the can tube.

  • @genecornette9772
    @genecornette9772 ปีที่แล้ว +4

    Dude, if that is oven cleaner and you’re pointing at your face if anything goes wrong, somebody will get hurt…

  • @serpentrae
    @serpentrae ปีที่แล้ว +2

    If you want to put 85 psi once it reaches 85 there is no point in holding it there any longer 85 is 85 even if you hold the air fitting on the can for an hour you still only have 85 psi

  • @GeorgeNadaYT
    @GeorgeNadaYT 4 ปีที่แล้ว +4

    They sell adapter so you can use the compressor in an electrical outlet. No need to connect it to your cars cigarette lighter.

  • @imhigh0013
    @imhigh0013 ปีที่แล้ว +1

    It believe it's about 90psi you're looking for in a spray can. Since you have a Guage there for use and all...

  • @franceleeparis37
    @franceleeparis37 3 ปีที่แล้ว +2

    Excellent.... can save a lot of money

    • @joehowto
      @joehowto  3 ปีที่แล้ว

      Thank you

  • @Latanya-eq2hz
    @Latanya-eq2hz 3 ปีที่แล้ว

    I have a question. What if i want to fill it with gas, can i use the same tool only difference would be the gas pan?

    • @joehowto
      @joehowto  3 ปีที่แล้ว +1

      Try it and let me know thanks

    • @turn-n-burn1421
      @turn-n-burn1421 11 หลายเดือนก่อน

      What 'gas' are we talking about?

  • @sunkissed6413
    @sunkissed6413 3 ปีที่แล้ว +2

    Question: My aerosol stopped working and it still has contents in it… if i do this will it explode?

    • @ferndog1461
      @ferndog1461 2 ปีที่แล้ว

      Exploding is possible. Do 1 minute increments with portable 12V air compressor.

    • @loktom4068
      @loktom4068 ปีที่แล้ว +2

      I tried, and no problem.
      But to be safe, I only pressurized it to 65-70 psi incase the gauge is not accurate.
      Yes, wear eye and mask safety gears.
      Wear the worst clothing you have.

  • @MARALAGO2024
    @MARALAGO2024 2 ปีที่แล้ว +1

    I can tell where youre from............. How did you get named? Were pots and pans involved?

  • @mrgcav
    @mrgcav 2 ปีที่แล้ว +3

    Most spray cans use a propellant with a low boiling point not atmospheric air, hence "Aerosol". Atmospheric air contains moisture and oxygen which will ruin most products. Who wants moisture in their WD40 or paint. Conclusion. Very limited usage. This is time consuming and inefficient. Better to buy a spray gun or an airbrush.

  • @brucet1043
    @brucet1043 ปีที่แล้ว

    Why we have to spend too much time for this ?

  • @ВадимКузнецов-з2й
    @ВадимКузнецов-з2й 2 ปีที่แล้ว +1

    ...ух- ты!, бляха-муха!-, Америку открыл!-, кошмар какой!!!

  • @serpentrae
    @serpentrae ปีที่แล้ว

    harbor freight air pumps are crap don't waste your money

    • @turn-n-burn1421
      @turn-n-burn1421 11 หลายเดือนก่อน

      All of the ones I bought work just fine. Not saying there aren't some duds. Wouldn't be the first time HF sold something that was crap. Most things I've bought there are okay. It is Harbor Freight after all.

  • @TheClampetts
    @TheClampetts 2 ปีที่แล้ว +1

    Nothing like working by the side of the road using your car as your "shop". ;-)
    It would have been a lot easier to get the compressor up to pressure first, then just a 1-2 second burst of pressure.

    • @thomasz4981
      @thomasz4981 2 ปีที่แล้ว +2

      That compressor doesn't have a tank, it won't build pressure.