Ram Truck, Dodge Ram back slider glass replacement by Alfredo’s Auto Glass in Corona CA

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • Ram Truck, Dodge Ram back slider glass replacement by Alfredo’s Auto Glass in Corona CA

ความคิดเห็น • 86

  • @ryandeweese363
    @ryandeweese363 ปีที่แล้ว +2

    Having to do the same repair on a 2016 ram 1500 longhorn, I wanted to see how the professionals do it and your video was just what I was looking for!! Thank you, and excellent work!!

    • @LuxuryZoneProductions
      @LuxuryZoneProductions ปีที่แล้ว

      Got my done last week. Collision place did install. Says new one will leak to . 😔

    • @mosesayala4737
      @mosesayala4737 หลายเดือนก่อน

      @@LuxuryZoneProductionsthird brake light. Check out the seal and housing unit

  • @Bryan-ur4mo
    @Bryan-ur4mo 4 ปีที่แล้ว +2

    I’m an installer at a small family business here in NC. Just wanted to chime in and say when I cold knife these out I will usually cut the encapsulation out all the way around with my long knife first. Makes it so much easier and gives you more room to work which helps with protecting then paint. Nice work 👍🏼

  • @artisanhandyrandy2900
    @artisanhandyrandy2900 4 ปีที่แล้ว +1

    Thank you for the info. Just had the trash can bust the same driver side panel in my 2019 Ram 1500. Really APPRECIATED THE MUSIC IN THE BACKGROUND. JESUS WILL HELP ME THROUGH THIS ONE.

  • @capitalchange_4205
    @capitalchange_4205 4 ปีที่แล้ว +2

    Great video man. perfect timing to find this video, for I have just ran my CanAm through my rear passenger panel window lol and now must replace the entire window, how wonderful.

  • @dfu1685
    @dfu1685 2 ปีที่แล้ว

    I wish you could replace mine. You have fantastic techniques and appear to have even better integrity! Well done. Don’t ever change that.

  • @phototec
    @phototec 9 วันที่ผ่านมา

    Great video, If you have a manual sliding window on a 2004 Ram 1500, do you have to remove the rear seat?
    where did you get the blade for the multi-tool to cut around the glass? Also, what urethane and primer are you using? Thanks

  • @LuxuryZoneProductions
    @LuxuryZoneProductions ปีที่แล้ว +2

    Had mine replaced yesterday ram 2021 1500. Was leaking. The guy said the new one will leak again. There is a flaw in oem window. What's your opinion? Thanks

    • @twoOnine
      @twoOnine ปีที่แล้ว

      I had the same issue with my 2019 Laramie. Read a couple of forums and apparently a lot of people are having this issue. I guess RAM is waiting for more lawsuits to finally do a recall.

  • @daneheule5593
    @daneheule5593 4 ปีที่แล้ว +1

    Obviously a very professional job! Thanks for the informative video.

  • @michaelmurray1968
    @michaelmurray1968 ปีที่แล้ว +1

    Great job I'm about to jump in the garage to start mine. I saw a "special" windshield removal tool set at Harbor Freight and picked it up. Your way looks much better but I couldn't get a good look at the blade you used. Was it some sort of hooked blade? Thanks for taking the time to educate us weekend warriors!!

  • @ponce1521
    @ponce1521 3 หลายเดือนก่อน

    Great Video brother!! You def take pride in your work!!

  • @ericbray1745
    @ericbray1745 5 ปีที่แล้ว +1

    Thanks for taking the time to make videos! I have been using the Milwaukee tool for about a year, really helps when other tools fail .

  • @eduardocarrillo6165
    @eduardocarrillo6165 2 ปีที่แล้ว +1

    Hey Alfredo, first question is, where are you located? I can recognize that the tool you are using is the M18 Multi-tool. Second question is, what blade are you using and where can i get one?

  • @lllandscaping4951
    @lllandscaping4951 3 ปีที่แล้ว +1

    Excellent video thanks for sharing!

  • @SolarControlPgh
    @SolarControlPgh 4 ปีที่แล้ว +1

    Thank yoiu for the step by step. It was very helpful for my 1st one of these.

    • @tonyfay2670
      @tonyfay2670 4 ปีที่แล้ว

      Do you know if that was an oscillating saw that he had used? And what type of bit is used to cut the seal out?

  • @wilberumana8123
    @wilberumana8123 4 ปีที่แล้ว +1

    Never done electric but thanks i learn today

  • @aoetjen6758
    @aoetjen6758 5 ปีที่แล้ว +1

    Good job. I hate those Windows I've had to take some out for body shops so they can do roof job in it. I remove the headliner and use an air knives like your electric one on the inside works good.

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  5 ปีที่แล้ว

      a Oetjen thank you. Power tools and Pneumatic tools are so helpful same thing with fiber line or wire tools. Now on days we got to have all of them with all this different designs.

    • @bigelile07
      @bigelile07 4 ปีที่แล้ว

      If you are doing it in a body shop have them remove the seats and headliner.

  • @tonyfay2670
    @tonyfay2670 4 ปีที่แล้ว +3

    What tool is it your using to cut around the seal? Is it an oscillating saw? And what bit is that?

    • @JimboJiizzm
      @JimboJiizzm 3 ปีที่แล้ว

      It is an electric cold knife. Same thing as a regular lever cable pull knife used to cut out windshields, just electric.

  • @laglasstech2180
    @laglasstech2180 5 ปีที่แล้ว +1

    I use the same technique as you. also I use the same dow 30 minute adhesive (dow all the way) . I have a 2500 to remove the slider for a body shop tomorrow and they want me to save the slider if i can. I was going to try my WRD spider and try and string it out. I would appreciate any tips on saving the slider? Thanks Alfredo ,really enjoy your informative videos I always enjoy seeing good technicians techniques . thanks again Alfredo.

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  5 ปีที่แล้ว

      Laglasstech Thank you for taking the time to watch my videos! I have use the Spyder & the Raptor to save the exact same back window and I’ve been successful saving them, you would definitely have to bring part of the headliner down, position the spider or raptor all the way at the end of the frame when already cutting on the top and the bottom on the inside of the truck so that you don’t start cutting into the frame. Also don’t forget to bend the metal tabs towards the glass, make sure the fiber line is in between the frame and the body, guide it with a bone (plastic stick) to help you keep the fiber along the frame on the top and on the bottom so you don’t cut into the frame of the glass.

  • @katiestiles3530
    @katiestiles3530 ปีที่แล้ว

    You did awesome job. I learn so much. I watched soooo many others struggle with this lol

  • @Tempsho
    @Tempsho 5 ปีที่แล้ว +8

    Would be nice if the rear seats folded down instead of having to remove them completely.

  • @mauroclementes1094
    @mauroclementes1094 3 ปีที่แล้ว

    Gracias hermano hoy pude poner una ventana de una 2016 RAM 4 door me sirvió mucho tu video gracias de nuevo

  • @luiscruz1101
    @luiscruz1101 5 ปีที่แล้ว +1

    Buen trabajo mi amigo que sigas a siendo buen trabajo

  • @alexk9165
    @alexk9165 4 ปีที่แล้ว +1

    Hi, amazing video, I'm down in Panama and I have to replace this window on my Truck, just wondering, what primer did you use when you were preparing the new window?

  • @williamdaniels6094
    @williamdaniels6094 ปีที่แล้ว

    Great job very informative! Thanks

  • @watsonsnasty2327
    @watsonsnasty2327 3 ปีที่แล้ว

    Do you mind me asking how that windshield busted! Mine busted the same way on the same side for no reason !

  • @sireposey8556
    @sireposey8556 3 ปีที่แล้ว

    Awesome Job, thank you for the detailed review, New Subscriber here 👍🏼

  • @deweyford7869
    @deweyford7869 4 ปีที่แล้ว +1

    My 19 Ram big horn didn't come with the sliding rear window, can you add the sliding rear window and how much? I was told the Big horn has the wiring already there.

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  4 ปีที่แล้ว

      I would check first to make sure the plug for the window motor and the plug for the switch are there to make sure it’s going to work.

    • @twoOnine
      @twoOnine ปีที่แล้ว

      Don't do it. The 5th gen models have leaking issues due to poor design. My 2019 Ram Laramie started leaking about 3 years after i got it and the dealship refused to replace it because it was out of warranty! POS

  • @juanbaeza2251
    @juanbaeza2251 5 ปีที่แล้ว +1

    EL MEJOR"
    GRAN TRABAJO ! MUCHO TIEMPO LLEVA !
    AQUI EN ARGENTINA ELIMINAMOS LA LUNETA COMPLETA Y COLOCAMOS UNA ENTERIZA !
    NO SE CONSIGUE LA LUNETA ORIGINAL , YA QUE ES MUY COSTOSA!

  • @sergiochavez3530
    @sergiochavez3530 ปีที่แล้ว

    Hi Alfredo tengo una pregunta tengo una ram 2022 pero el vidrio de atrás no tiene ventana puedo cambiarlo a uno con ventana y que tenga descongelar porque el que trae de fábrica no tiene ventana atrás ?

  • @wolfpacklv
    @wolfpacklv 2 ปีที่แล้ว

    What would it cost in 2022 to replace a regular one piece glass to a roll down on a 4th gen ram?

  • @davegalassi2552
    @davegalassi2552 5 ปีที่แล้ว

    I have a Dodge 2015 Tradesman 2500 Crew, Can i put a power factory sliding window in it..Wasnt sure if it was wired from the factory ?

  • @yamahar1castillo923
    @yamahar1castillo923 4 ปีที่แล้ว +1

    Pregunta en la ventana de atras de una 2005 ram , se podra hacer la convercion a ventana corredisa !?

  • @onebaddj
    @onebaddj 2 ปีที่แล้ว

    Awesome video! Thank you.

  • @bruceleealmighty
    @bruceleealmighty 3 ปีที่แล้ว

    Very informative video. Lots of close (perhaps a tad wobbly) many answers provided video. Just as an aside, I hope you are using tag words and might I suggest adding Dakota, because this is exactly the same procedure. I know you might have been concerned with the length of the video but seat placement work might be nice to see, even if you redirect to a different video.Very professionally applied overall though. Thanks

  • @Wildrose27
    @Wildrose27 26 วันที่ผ่านมา

    You are a legend
    Thanks for the guide ❤

  • @scottmarshall6060
    @scottmarshall6060 3 ปีที่แล้ว

    What blade do you have in the oscillator?
    Also can I install a used window from a junk ram truck.

  • @mycarglassyouautoglassexpe2485
    @mycarglassyouautoglassexpe2485 5 ปีที่แล้ว +1

    Grate job how much you charge for this.

  • @StevenMcMullin
    @StevenMcMullin 3 ปีที่แล้ว

    I have a 2016 3500 Megacab with same issue, the seats in mine fold forward... I would think that you can do the replacement without seat removal in the Megacab? Also wondering where to get this done right in the Seattle area?

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  3 ปีที่แล้ว

      Pls check the third brake light first, %90 of the times that’s the problem where it leaks from.

    • @StevenMcMullin
      @StevenMcMullin 3 ปีที่แล้ว

      @@AlfredosAutoGlassRepairCorona I replaced the gasket on the 3rd brake light a few days prior to the back window exploding when the door shut! Right now I have an appointment with Safelite to replace it, not sure if thats' the way to go or if I should go to a dealer, is a blown out window covered under warranty etc? I sure hope that me putting on a better gasket is not the cause of the pressure in the cab blowing out that window instead of escaping past the old seal on the brake light? Anyway I need a replacement of the 3 piece, heated, motorized back window, tinted dark

  • @КанадскаярыбалкаиохотасАлексом

    but if I need save glass , just doing body repair . How cut it gently ?

  • @CarlosLopez-uw3no
    @CarlosLopez-uw3no 3 ปีที่แล้ว

    Donde esta tu taller ocupo tus servicios para una ram 2013 el mismo del video, en cuanto sale todo

  • @matthewmoore7671
    @matthewmoore7671 5 ปีที่แล้ว +1

    What is the power tool called you used?

  • @doubletappllc
    @doubletappllc 3 ปีที่แล้ว

    Hey guys any info On the cold knife blade For use on oscillating tools?

  • @ericbray1745
    @ericbray1745 5 ปีที่แล้ว +1

    This is Eric, what blades work best regular or reverse sharpened

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  5 ปีที่แล้ว +1

      Eric Bray I use 51848 1in and 51849 1 1/2in but I still have to sharpen them right out of the bag.

    • @kevincharles6474
      @kevincharles6474 4 ปีที่แล้ว +1

      @@AlfredosAutoGlassRepairCorona where do u get your blades from for the multi tool ?

  • @AryelAlcaraz
    @AryelAlcaraz 3 ปีที่แล้ว

    What adhesive are you using?

  • @ryan9984
    @ryan9984 5 ปีที่แล้ว

    Hey if i have this type of window on my ram 1500 2013 can i switch it to a full window as i dont like the current window also left side is broken

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  5 ปีที่แล้ว +2

      Ryan seas yes you could always switch it to a 1 piece window. Less problems and much more affordable.

  • @cablepratt8065
    @cablepratt8065 2 ปีที่แล้ว +1

    I just watched glass over glass smh 🤦‍♂️ I got The Whole new set up and and goona watch your video and pull mine out and put new one in

    • @cablepratt8065
      @cablepratt8065 2 ปีที่แล้ว

      I ended up taking a saws all to that crap to get it out. Today rewatch the video and goona glue new one in

  • @brotenrab7108
    @brotenrab7108 4 ปีที่แล้ว

    Where can I get a removal tool like that??

  • @jesicajauregui1536
    @jesicajauregui1536 4 ปีที่แล้ว

    Hola alfredo ayer remplasaron el vidrio trasero igual como el de este video mi troca es ram 1500 disel 2014 h cuando me la entregaron no ensendio que pudo ser..

    • @jesicajauregui1536
      @jesicajauregui1536 4 ปีที่แล้ว

      No funcionaba nada no ensendia como se desprogramo todo..

    • @AlfredosAutoGlassRepairCorona
      @AlfredosAutoGlassRepairCorona  4 ปีที่แล้ว +1

      @@jesicajauregui1536 mas seguro que dejaron descargar la batería al tener algo prendido mientras trabajaban. Dudo que allá sido algo con lo del remplazo del vidrio lo peor que puede pasar si es que fuera por una conexión simplemente fundiría un fusible nadamas.

    • @jesicajauregui1536
      @jesicajauregui1536 4 ปีที่แล้ว

      Si eso crei asi le pasamos bateria porque pense q eso seria pero no aun no funciona pero se me iso raro si mi troca andaba al 100 y nomas le pusieron el vidrio no prendio mas....

    • @jesicajauregui1536
      @jesicajauregui1536 4 ปีที่แล้ว

      Muchas gracias alfredo!!

  • @JavierGarcia-il6zp
    @JavierGarcia-il6zp 3 ปีที่แล้ว

    Where are you located

  • @VodKaSlam
    @VodKaSlam 4 ปีที่แล้ว +1

    I can believe dodge had to make the ram soo difficult to change the rear window. I shattered the middle part that slides. Previous models you can just buy a new window and replace it yourself with 5 mins for $100. Mine I been quoted to spend $1,200 and have to replace the entire damn window.

  • @kaleof3748
    @kaleof3748 4 ปีที่แล้ว

    Would this work on a 1998 model?

  • @tomcarpenter700
    @tomcarpenter700 3 ปีที่แล้ว +1

    So his window is a back slidder

  • @maxoconnor2695
    @maxoconnor2695 5 ปีที่แล้ว

    How you install the right way the cold knife to the Milwaukee tool ??

  • @acreageliving
    @acreageliving 4 ปีที่แล้ว

    stupid ice from car wash fell on my back window on my brand new ram. huge gouges on plastic piece above sliding window. I hate the thought of my truck getting dismantled like this, most installers dont put shit back correctly or do as good as job as you. Now to decide to live with gouges or get window replaced under insurance. Both seem like crappy options

  • @Bigshoots86
    @Bigshoots86 4 ปีที่แล้ว +1

    I bought the panel replacement for 100 bucks off ebay but i took a wood chisel to all the broken glass still glued there and put the window on myself. Shame on dodge for not selling replacement glass for those windows, it's an effing truck, that glass is getting broken at some point0

    • @montoyadeejay4418
      @montoyadeejay4418 7 หลายเดือนก่อน

      hey bro, can you tell me where you buyed your glass? can I have the link? please

  • @ShawnStaton-im9pb
    @ShawnStaton-im9pb 9 หลายเดือนก่อน

    I'd this about removing seats & seatbelts or a window..

  • @crownnothin
    @crownnothin ปีที่แล้ว

    You dont have to remove the whole back glass to replace the slider

  • @Michael22222
    @Michael22222 หลายเดือนก่อน

    When someone says "um" before every sentence. 100% that they are full of shit