Killing that slo motion nice video and I pray for all those affected by this storm I’ve been through storms like this hopefully FEMA steps up and takes care of the people who truly need help ✌️
I love the music score! The axles look great! I hope you was able to fix that problem with the flat point and set screw! Those straight axles allow for that sweet top speed for trailing and extra boost while crawling if needed and thats cool! Its a great thing to support our RC community any way we can! Good on you for sure! Stay cool and RC on!☮️
Thank you :) I got it working. I took every ones advice and it worked. Literately Every ones Advice. I think the dremel flat spots is what did it. 370 will Twist those plastic ends off the Spline. Domino Effect on the WPL. once you change one thing, it all starts to fail hehehe. But that is Understandable . 370 is twice the motor. More Amps. Took a little trick to keep the plastic links too. The ends are cups. screw and a hex nut for the cut was perfect size. Hahahaha Good Times
I need your thoughts on something!?: Do you think I should go ahead and begin a fresh upgrade from top to bottom on my C24 or get the new WPL Suzuki Jimny that already has the 370w/counter rotating driveshafts and just upgrade whats needed to make it great? If i did the C24 than i would get that same motor and tranny that the Suzuki has stock!
Almost depends on which body you want hehehe. They both going to need work. C24 most likely more. Most my First video of mine. IT has a 30a esc, and 6ch receiver HOTrc... with the 180 stock motor it wasn't bad. For sure need the 370 for trailing. At first i just messed with the stock shocks and it was fine. and i ran those stock plastic Drive lines till recently changed to 370. More i did the more problems i ran into. I hear a lot of good stuff and little bad on that new Suzuki though. With the rotating, no torque twist. I get it bad crawling up hill but i like it. Realistic to me :) Hope that helps. You Rock buddy. Oh my Blue c24 i posted a breakdown. of what i did. IT is awesome now. Wife enjoys driving it. IT is faster then mine she says and can Crawl. Esc, receiver, shocks, steering links. No bump steer, an it can crawl.
@@JamesDirtRC yeah the C24 will need the most work! Plus i will need to find another complete WPL 370 motor and tranny setup as I got lucky and found the one I put on my C34 for right around $15! The Suzuki already has it plus unlike my Red painted Suzuki, this new one has actual shocks instead of leaf springs which will make it better for crawling.
@@deanmachinerc My Comment is gone.... Small Channel guy got a Jinmy WPL C74-1. Windows come off and Window Frames. Doors open. Looks cool th-cam.com/video/vFExcSJ3B1c/w-d-xo.htmlsi=YMqg1VTwZGG_f4MG
Nice paint job 👍
Thanks 👍
Hope you can help your friend a little bit..
Nice, great work, I like this look! 👍 👍 👍
Thank you! Cheers!
Killing that slo motion nice video and I pray for all those affected by this storm I’ve been through storms like this hopefully FEMA steps up and takes care of the people who truly need help ✌️
Thanks :)
Thank you so much James 🤙
I just Hope it helps. You Rock Brother. Much Love.
Glad to see people are Donating. Rock On Buddy
I love the music score! The axles look great! I hope you was able to fix that problem with the flat point and set screw! Those straight axles allow for that sweet top speed for trailing and extra boost while crawling if needed and thats cool! Its a great thing to support our RC community any way we can! Good on you for sure! Stay cool and RC on!☮️
Thank you :) I got it working. I took every ones advice and it worked. Literately Every ones Advice. I think the dremel flat spots is what did it. 370 will Twist those plastic ends off the Spline. Domino Effect on the WPL. once you change one thing, it all starts to fail hehehe. But that is Understandable . 370 is twice the motor. More Amps. Took a little trick to keep the plastic links too. The ends are cups. screw and a hex nut for the cut was perfect size. Hahahaha Good Times
@@JamesDirtRC excellent! Yep these 370’s got the torque! I love them! My favorite motor size for any mid to small RC! ☮️👍
great trail truck 👍👍
Thanks 👍
Im out here post storm too so i cant do much but ill give you my like and comment for the algorithm
Thank you. You Rock
I need your thoughts on something!?: Do you think I should go ahead and begin a fresh upgrade from top to bottom on my C24 or get the new WPL Suzuki Jimny that already has the 370w/counter rotating driveshafts and just upgrade whats needed to make it great? If i did the C24 than i would get that same motor and tranny that the Suzuki has stock!
Almost depends on which body you want hehehe. They both going to need work. C24 most likely more. Most my First video of mine. IT has a 30a esc, and 6ch receiver HOTrc... with the 180 stock motor it wasn't bad. For sure need the 370 for trailing. At first i just messed with the stock shocks and it was fine. and i ran those stock plastic Drive lines till recently changed to 370. More i did the more problems i ran into. I hear a lot of good stuff and little bad on that new Suzuki though. With the rotating, no torque twist. I get it bad crawling up hill but i like it. Realistic to me :) Hope that helps. You Rock buddy. Oh my Blue c24 i posted a breakdown. of what i did. IT is awesome now. Wife enjoys driving it. IT is faster then mine she says and can Crawl. Esc, receiver, shocks, steering links. No bump steer, an it can crawl.
@@JamesDirtRC yeah the C24 will need the most work! Plus i will need to find another complete WPL 370 motor and tranny setup as I got lucky and found the one I put on my C34 for right around $15! The Suzuki already has it plus unlike my Red painted Suzuki, this new one has actual shocks instead of leaf springs which will make it better for crawling.
@@deanmachinerc My Comment is gone.... Small Channel guy got a Jinmy WPL C74-1. Windows come off and Window Frames. Doors open. Looks cool th-cam.com/video/vFExcSJ3B1c/w-d-xo.htmlsi=YMqg1VTwZGG_f4MG