А я посмотрел около десятка таких видео и значительно продвинулся вперёд в технике сварки. Теперь я просто кладу электрод вдоль шва, он сам по себе поджигается и расплав идеально ровно всё заполняет, шлак отпадывает сам и ничего зачищать не нужно. В планах довести число просмотров видео по сварке до ста.
@@bobbobrov427 я уже за сотню перешёл.теперь инвертор не нужен,пропускаю ток через себя и кровью пропекаю деталь.в планах дойти до тысячи.там говорят можно просто членом бить по заготовке,чтобы она раскалилась и варить ничего не нужно
A decent enlightening post that you have shared and appreciate your work for sharing the data. I value your endeavors and all the best. Praise your work and continue sharing your data.
My son just graduated from high school plus he received his welding certificate as well from his secondary school so I definitely forwarded this to him. Just awesome welds .
Для новичка очень полезно видеть как голой рукой електрод ставиш, а ногой не опьітний человек может и на метале в шлепанцах стоять . Может уже и учится не придется ☝️👏👏👏
A से Z तक आधुनिक गेट और विकेट। काटना, वेल्डिंग करना, पीसना। मेरे अनुभव से सलाह। लेखन :6 th-cam.com/video/PqfhHVt6o54/w-d-xo.html Modern gate and wicket from A to Z. Cutting, welding, grinding. Advice from my experience. Writings : th-cam.com/video/PqfhHVt6o54/w-d-xo.html
Я сварщик шестого разряда! Зачем я смотрю как студентов учат дугу зажигать!???;))))) Не , ну реально! О чем это!?) Дружище! Ты видно швов нормальных не видел , раз эту хрень выставляешь..
Starting an arc with a full length rod is easy. Just "drag" it. Works well. And that's a lot of unnecessary "prep" work for such a simple weld. I've been doing this for 50 years. The welder is not a problem. The arc is steady once established.
@Douglas Pollock @Arnold Alt etc etc Fully half the comments on this page (and the majority of those in English) seem to be scorn from people who seem to think a teacher's job is to impress students by effortlessly tackling situations which are set up to be difficult. It seems exactly backwards to me. I guess it must be a cultural thing. "Look at that so-called ski instructor demonstrating wedge turns. What a bunny. I can ski backwards while cutting my fingernails. etc etc"
An alternative would be to show the patterns "dry" first, just moving the stick without welding. It would be easier to see how big the motions are and how tight together.
Половина електрода опір менший і новичку легше дугу запалити і шов тягнути.сам колись вчився на товстому металі,зараз вже досвід і вміння є.плюс теорія,кнмжку про зварювання купив перш за все.
Fiti binecuvantat! Cum se procedeaza atunci cand electrozi sunt de calitate proasta? Poti sa cobstati calitatea electrozilor la cumparare sa nu dai banii pe ceva ce nu poti utiliza?
Perfect video for my high school students to watch. SMAW with bare hands and also be sure to take the guard off the angle grinder; wouldn't want it to get in the way....
The first time you used low amperage and the second time you increased it, just to show us how quickly you learned the trick. I see you're a professional. 👍
I assume professional was meant as a joke? No professional welds without gloves. Also you only need to cut down rods if you can't control the rod. You have to keep stopping and starting. The slag coming off in one piece is just a trick of a pointless weld on top of a flat plate. And the current seemed a little too high in my book, first weld looked a little undercut.
As a beginner can I recommend that you wear gloves when working with any engineering projects unlike the person who seems to be advising people by demonstrating welding with bare hands
Halika sa channel ko sir kung gusto mong manood ng mga kung ano anong video Hindi ko alam kung meron pa yung video ko na vertical at horizontal At hindi ko rin alam kung spot weld or fullweld ang ginawa ko
It might be on 155 , because he was doing it on 25mm plate and 4mm weld rod / stick. Nevertheless it was unsafe video.I mean no safety measures showed in the video
If your going to teach, start with some better safety practices. Wear gloves and put a guard on the grinder. People who watch this might not understand the full extent of the risks presented.
@@googlreviews7813 burning rods to cover a scratch on a plate is not a job with a real high demand here in the States. Here the employer expects something to be constructed and fabricated, you know, a finished product.
I always liked how instructional video uploaders acknowledge praise in the comment section but, the guy mentioning the basic principles of safety or anyone giving constructive criticism gets completely ignored. Respectfully.
Wat een onzin, eerst kan hij niet eens een elektrode aanstrijken en daarna wel lassen omdat er een slijpgroefje in het materiaal is geslepen. Dat helpt niet hoor!
Try putting a root in a pipe at 6G and then filling and capping, please do it with ppe because you'll end up very sorry in time. Welding is a skilled trade that takes time to learn and knowing how to fuse different metals and alloys together takes knowledge not just someone burning un preheated low hydrogen stick rods on camera
@@sharkdark666 I'm not a weld inspector just a coded welder on MMA, TIG and MIG after doing a four year apprenticeship which is pretty useful on petrochemical sites and oil refineries
Con el espesor que lleva el metal es más fácil no traspasar entonces yo que no se soldar apenas te lo hago perfectamente, lo difícil es hacerlo con un metal fino que es ahí donde se complica la cosa
Por cierto que es más fácil en lamina gruesas,pero que haga el mismo cordón con una lamina de milímetro y medio,se le perfora aunque baje el amperaje😬😬😬
Solo hay que probar. Bajar a menos de 50. Si se puede hacer en una fábrica se puede hacer con un soldador convencional que tenga un regulador de potencia
Милый человек хоть я вас не знаю.Мы не знакомы .Но по отзывам вы светлый человек И просто хочется сказать .Будь просто счастлив .Спасибо за все что вы делаете для людей .Здоровья вам на долгие годы.Надежных и преданых друзей .Что бы вы всегда были нужны кому то .И вас всегда ждали на этом большом шаре .Всех вам благ .Спасибо за вашу проделанную работу .Потраченные силы нервы время .Так держать.Низкий вам поклон .Респект и уважение
É cada coisa que aparece, uma pessoa para soldar como esse cara( o que não é nada demais) precisa ter no mínimo 2 anos de prática, ele divide o eletrodo ao meio para dar a entender que qualquer um vai fazer isso kkkkk!
Realmente não é tão simples assim, comprei uma inversora e estou apanhando muito para aprender a soldar. No meu caso é para ajudar em algum artesanato que pretendo fazer mas está complicado!
Cristóvão Almeida, boa tarde. Arruma umas chapas sem ferrugem, coloca uma amperagem um pouco mais alta, inclina um pouco eletrodo no início para não agarrar, vai praticando. Só a prática vai te ensinar. Toma bastante cuidado com os olhos, queimadura de solda é terrível. Use eletrodo bom, isso ajuda muito, ESAB por exemplo.
@@afonsobatista5837 muito obrigado Afonso vou fazer isso que você falou. Realmente só a prática e quem vai me ajudar além dessas dicas que você me deu, eu tenho uma máscara de proteção e quanto ao eletrodo vou comprar esse indicado por você. Muito obrigado fique com Deus!
Спасибо за урок. Раньше не получались такие красивые швы, но как посмотрел видео теперь все замечательно) все достаточно подробно изложил.
А я посмотрел около десятка таких видео и значительно продвинулся вперёд в технике сварки. Теперь я просто кладу электрод вдоль шва, он сам по себе поджигается и расплав идеально ровно всё заполняет, шлак отпадывает сам и ничего зачищать не нужно. В планах довести число просмотров видео по сварке до ста.
@@bobbobrov427 я уже за сотню перешёл.теперь инвертор не нужен,пропускаю ток через себя и кровью пропекаю деталь.в планах дойти до тысячи.там говорят можно просто членом бить по заготовке,чтобы она раскалилась и варить ничего не нужно
@@bobbobrov427 🤣
Ржу. Поглядел это видео поржал. Спасибо. Было весело
А теперь возьми метал 2-3 мм и сделай такой же красивый шов в углу 90°
I love this guy. He doesn't talk. He just direct to the point. 👌 Action speaks louder than words they say. 🔥
🤣. C'est surtout n'importe quoi. Il est loin d'être pro ou alors cela devient n'importe quoi avec n'importe qui.
Jakie to elektrody
This guy is steady as a robot nice job thanks
You are a master of bond. Nice welding and very useful. Thanks bro. Please upload round pipe welding demo.
А теперь попробуй тоже самое на листе с толщиной 1,5 миллиметра ))
Легко полуавтоматом я могу и тоньше сварить
А электродом 4 мм ? Слабо???
Двойкой на нужном токе и 0.5 варится. Это просто сварка, ты будто о чем-то этаком говоришь.
A decent enlightening post that you have shared and appreciate your work for sharing the data. I value your endeavors and all the best. Praise your work and continue sharing your data.
th-cam.com/video/EPMCVn171h4/w-d-xo.html
Just the video I was looking for, well explained the different patterns, thank you
Well explained? I didn't see or hear anything explained.
@@kenrieger9179 he put the design on the screen as he was doing it, that way you could see what he was doing
Carha❤❤❤
this video really motivates me in doing my job. I hope it also educates others, thanks for all the knowledge👍🏻
Enhorabuena, excelentes videos👏👏
Quien no solda con esa soldadura se llama facilarc
My son just graduated from high school plus he received his welding certificate as well from his secondary school so I definitely forwarded this to him. Just awesome welds .
Im pretty sure your son already knows this basic stuff 😂
Action speaks louder,nice video sir❤
Pqp achei um vídeo bom, PARABÉNS! Direto ao assunto, estilo Chaplin 👏🏼👏🏼👏🏼 ninguém fala e todos entendem. Parabéns
Vous connaissez la soudure ? Parce que moi il me fait bien rire.
Кто читает этот комментарий желаю тебя здоровья
Для новичка очень полезно видеть как голой рукой електрод ставиш, а ногой не опьітний человек может и на метале в шлепанцах стоять . Может уже и учится не придется ☝️👏👏👏
Заставь дурака Богу молиться, он и лоб расшибёт.
شكرا على المعلومات القيمة. مزيدا من العمل و النجاح بإذن الله.
Really great one performance keep it up
Уважаемый автор, покажите пожалуйста вашу работу на тонкостенной профильной трубе.
Не, именно для совсем начинающего, чтоб научиться первые швы класть... нормально)
Под водой?
Muito boa a dica .
Mas a lixadeira sem proteção nao bom usar.
Perfect 👌 thanks for sharing💙🙏🙏🙏
Thanks for teaching that will makes us perfect to our carear
Wow that is impressive welding proper skilled craftsmanship well done 👏🏻👏🏻👏🏻👏🏻👍🏻
ничего не понял, но спасибо было интересно)
A से Z तक आधुनिक गेट और विकेट। काटना, वेल्डिंग करना, पीसना। मेरे अनुभव से सलाह। लेखन :6
th-cam.com/video/PqfhHVt6o54/w-d-xo.html
Modern gate and wicket from A to Z. Cutting, welding, grinding. Advice from my experience. Writings :
th-cam.com/video/PqfhHVt6o54/w-d-xo.html
Excellent project. I liked it ! My idol !
Я сварщик шестого разряда! Зачем я смотрю как студентов учат дугу зажигать!???;))))) Не , ну реально! О чем это!?) Дружище! Ты видно швов нормальных не видел , раз эту хрень выставляешь..
Ааа я валяюсь) друг да ты просто завидуеш что он может всякую уйню делать ,а тебе разряд не позволяет
А он разве знает какой должен быть шов? Он по моему и в маску нифига не видит, видит просто огонёк )
Я знаю массу сварщиков с 6 разрядом которые нихрена не умеют и знаю людей без разрядов которые варят намного лучше
you answered a question for me! can you cut the rods and still use the them to weld good with?
Good job my friend, stay connected it's awesome thanks for sharing
Jizakallah bhai, this was very helpful
Starting an arc with a full length rod is easy. Just "drag" it. Works well. And that's a lot of unnecessary "prep" work for such a simple weld. I've been doing this for 50 years. The welder is not a problem. The arc is steady once established.
.....I hope after 50 Years of experiance .... that the work for ,,YOU,, no problem is !!! 😣....
@Douglas Pollock @Arnold Alt etc etc Fully half the comments on this page (and the majority of those in English) seem to be scorn from people who seem to think a teacher's job is to impress students by effortlessly tackling situations which are set up to be difficult. It seems exactly backwards to me. I guess it must be a cultural thing.
"Look at that so-called ski instructor demonstrating wedge turns. What a bunny. I can ski backwards while cutting my fingernails. etc etc"
I’m looking into self teaching myself to weld. Looking for what welding machine to buy
We call that "pecker tracks" not good. After 50 years you should be able to start without dragging, jmo
@@robertflores7813 Whatever
А теперь всё тоже самое,но стык профильной трубы толщиной 1,5 мм. Просим , Маэстро.
th-cam.com/video/ZJBIspILYxE/w-d-xo.html
Да, рельсы варить, много ума не надо, а вот консервную банку.....
@@nataly-maleeva Наташа, зачем обижать тех кто варит рельсы, там не меньше своих тонкостей.
@@nataly-maleeva наташ, ты про тушенку что ли? Банку с мясом в кипятке варишь 5 часов и готово.
Кожен розумніший за другого,але для тих хто бачить це перший раз це круто .Людина старалась,дякую за відео!
An alternative would be to show the patterns "dry" first, just moving the stick without welding. It would be easier to see how big the motions are and how tight together.
Complimenti! Tutto spiegato benissimo. Molto comprensibile.
Бля сколько зла в комментах а человек просто показывает новичкам не чего лишнего.Респект автор добра всем .
Ну конечно ..прежде всего о себе думает. Лайки и просмотры собирает
Чего он показывает? Каким новичкам?
Если ты настолько новичок, то лучше к инвертору вообще не подходи
не зла, а просто стебуться
Половина електрода опір менший і новичку легше дугу запалити і шов тягнути.сам колись вчився на товстому металі,зараз вже досвід і вміння є.плюс теорія,кнмжку про зварювання купив перш за все.
Бред! Если руки корявые не.....и браться
Мой сосед когда в настроении може две газеты сварить ,вот это мастер.
Я знаю таких, кто воздух варит.
Nice 👍
electrode size & Amp please ?
I like the idea of cutting the rod in half. I will have to try that.
Cutting the rods in half is an old trick that we used on Nuke Plants long ago. We did that to get into very tight spots and I mean tight spots.
Wouldn't it have been easier just to use a tig?
@@RustyShacklefardd DUH!!!!!!!!!!!!!!!!!!!!!!
Quero ver soldador em um material fino com está amperagem 🤔
Esse cara tá doido 150 impossível
Ele está usando 4mm e ainda uma operarem muito auta
Fiti binecuvantat! Cum se procedeaza atunci cand electrozi sunt de calitate proasta? Poti sa cobstati calitatea electrozilor la cumparare sa nu dai banii pe ceva ce nu poti utiliza?
Perfect video for my high school students to watch. SMAW with bare hands and also be sure to take the guard off the angle grinder; wouldn't want it to get in the way....
don't start off weaving, just do stringers. weaving is pretty much only used in the vertical position.
10-часовую версию!
Nice welds. What type of rod are you running?
Hola ! tengo que reparar un portamatriz de fundiciòn gris. Veo que usted no hace un surco, sino que suelda "a nivel" ,...es correcto ?
The first time you used low amperage and the second time you increased it, just to show us how quickly you learned the trick. I see you're a professional. 👍
If this person was a professional he would be wearing gloves 🤔
As a retired welder , wear gloves every time!
@@jimmurphy4703 Jim respect to the retired welder, it must make you cringe when you see some of these videos and there attention to safety
I assume professional was meant as a joke? No professional welds without gloves. Also you only need to cut down rods if you can't control the rod. You have to keep stopping and starting. The slag coming off in one piece is just a trick of a pointless weld on top of a flat plate. And the current seemed a little too high in my book, first weld looked a little undercut.
@@sw793 great comment Simon, 👍
I’m a beginner and would like to thank you for making a helpful video.
As a beginner can I recommend that you wear gloves when working with any engineering projects unlike the person who seems to be advising people by demonstrating welding with bare hands
Peter Harris I wear gloves 98% of the time.
@@rtdave6982 good to hear Dave 👍 enjoy your projects 😉
You should learn from someone else. Much better welding tutorials out there on TH-cam. This guy’s a hack.
th-cam.com/video/ZJBIspILYxE/w-d-xo.html lathe machine and stick welding
While welding, shall we advance the electrode by pressing it to the surface?
Nah or it will stick keep it same distance
You are excellent welder 😘😘😘😘😘😘😘😘😘
sana po ung pg welding ng horizontal, vertical at overhead po ipalabas nyo
Halika sa channel ko sir kung gusto mong manood ng mga kung ano anong video
Hindi ko alam kung meron pa yung video ko na vertical at horizontal
At hindi ko rin alam kung spot weld or fullweld ang ginawa ko
Di nila kayo un pinoy lang makakagawa ng ganon hehehe gang flat lang sila
th-cam.com/video/qYqAaI3jSP4/w-d-xo.html ,drill operator
@@Vhandricksbm so bale ser ano ibig niya sbhin dito putulin yung welding rod or parangyayabang lang siya dito hahaha paki explain nga ser thanks
Супер!!!- только " глаза" нужно говорить!
Может ещё оценивать этот способ тренировки в Полуляхах?
@@Werwolf-21214 А кто полулях?
@@user-cd5pf3nj2u единица измерения такая
@@Werwolf-21214 Кто полумерами мерит- так и живет- полусделаным!
видео должно называться - как научиться разжигать и держать дугу. Обрезка электродов - просто их перерасход
Super welding 👍
Solda muiiito bem , parabéns um dia irei soldar assim .
th-cam.com/video/EPMCVn171h4/w-d-xo.html
😅
Muito boa sua solda perfeita...
th-cam.com/video/EPMCVn171h4/w-d-xo.html
Wow amazing
GREAT. THANK YOU SO MUCH AND GOOD LUCK FOR YOU ALWAYS.
I'm pretty sure the machine wasn't set to 155 amps when the video started. I dint think the rod sticking would have been an issue
th-cam.com/video/ZJBIspILYxE/w-d-xo.html
It might be on 155 , because he was doing it on 25mm plate and 4mm weld rod / stick. Nevertheless it was unsafe video.I mean no safety measures showed in the video
@@rordsonbarijunaki5279 You think that maybe, just maybe, OSHA and her cousin ANSI don't apply in his country??
@@rordsonbarijunaki5279 why does everyone keep harping on about saftey measures
@@ivorjones6618 safe working system is the first priority
luar biasa mau berbagi dengan banyak trik.terima kasih ilmu lasnya bang😙🙏🙏
I tried them and they work very well
the rod should be touching the material when welding or not? how away the rod should be?
Теперь всегда буду профильную трубу брать именно такой толщины.
If your going to teach, start with some better safety practices. Wear gloves and put a guard on the grinder. People who watch this might not understand the full extent of the risks presented.
Very correct Ray , and this yahoo is not even a good welder ,, and he decided he can teach .
Everyone's an expert, but won't make their own video, must be an American thing.
Meh, let em learn the hard way! Let common sense run it’s course
@@googlreviews7813 burning rods to cover a scratch on a plate is not a job with a real high demand here in the States. Here the employer expects something to be constructed and fabricated, you know, a finished product.
@@michaelchadwick3497
Really? Do you Guys actually weld there? I thought you import everything from China, and robots usually do the rest.
Excellent video
Не повторяй это!!!
They always called me “Mr. stick” when I first started welding
Then you learned about WD-40 and Goo-Gone??????????????
Elektrik kaynağını öğrenecekseniz rutil elektrot kullanın bazik elektrot yapışır durur 🙂
Бери пластины поменьше таких пластин сейчас не найти с последними ценами на метал
9679iKamkigi
Что не найти?
@@user-mc3yn2dh6v пластин сейчас все подозвали
Это точно,10-14ммсамое толстое,что сейчас варят,,ито всё хотят потоньше и попрочнее
I always liked how instructional video uploaders acknowledge praise in the comment section but, the guy mentioning the basic principles of safety or anyone giving constructive criticism gets completely ignored. Respectfully.
شكرا على المعلومة التي أفادتني كثيرا في ركوب قارب التلحيم الذاهب إلى جزيرة الملحمين
Горизонтальный шов самый лёгкий! Ты вертикальный научи людей!
7018 rod runs a nice bead always like running makes it look real nice.
Hola agradesco el video y quiero preguntar a que distancia debo desplazar la varilla de la superficie a soldar
This good learning for everyone . . 👍
SOLDA BEM APLICADA E DE UM ACABAMENTO PERFEITO PRIMOROSO PARABÉNS PELA POSTAGEM CÉSAR JATOBÁ-PE BRASIL
Wat een onzin, eerst kan hij niet eens een elektrode aanstrijken en daarna wel lassen omdat er een slijpgroefje in het materiaal is geslepen. Dat helpt niet hoor!
Perfeito 👏👏👏
ГПТУ вспомнил ,тожэ на фольге тренировался ,лайк за настольгию
А где там фольга?
Try putting a root in a pipe at 6G and then filling and capping, please do it with ppe because you'll end up very sorry in time.
Welding is a skilled trade that takes time to learn and knowing how to fuse different metals and alloys together takes knowledge not just someone burning un preheated low hydrogen stick rods on camera
Stfu it’s not that complicated
@@sharkdark666
well let's see if he can do a 6G to ASME 9 standard with the stick then weld some Aluminium, Hastelloy, 316L with the TIG Neatly!
@@Then.72 he doesn’t have to , and ur not entitled to test him .
Go and do something useful in ur life .
@@sharkdark666 I'm not a weld inspector just a coded welder on MMA, TIG and MIG after doing a four year apprenticeship which is pretty useful on petrochemical sites and oil refineries
Bom trabalho amigo eu também trabalho com solda elétrica adoro
عمله غلط
Cuando ya lo dominas todo 😅😅😅
But can u make that flux roll up when u not throwing all the heat u got to an inch thick chunk of iron?
I'll do. Just electrode size? Would You teach regulate the amps vs electrodes?
Удивительно, как этот болтун умудрился не прожечь эту фольгу)
Класс подмечено 😊👍
😀😀👍
😂😂
🤣🤣
Zhhhv
А откуда это стало новым трюком
Hole create th-cam.com/video/qYqAaI3jSP4/w-d-xo.html
Awesome tricks tq❤️
A GOOD WELDER ! EXCELLENT
Оказывается просто надо было амперов добавить😂
Es el primer video que explica al 100 sin tanto show!! Muchas gracias
Super good job 👌
Good job ❤❤❤❤
I got a tip as well try doing that on your side or lying on your back you find it isn't easy.
Сварка без краг-отличный трюк... Дальше ждём сварку без маски.
Судя по швам, тут сварка без рук
Я так и без маски заварю 😂
За лям рублей без сварочного аппарата заварю
Почему? когда показывает как будет варить он без краг, но когда варит он в крагах. На 3:24 присмотритесь
И без бровей . Ах ха ха 👏👏👏
AWESOME JOB, NİCE STREAM AS WELL! GOOD LUCK 🍀. 😃😃
Nice bro
En esa posición es fácil de soldar, lo difícil es soldar en posición vertical
Con el espesor que lleva el metal es más fácil no traspasar entonces yo que no se soldar apenas te lo hago perfectamente, lo difícil es hacerlo con un metal fino que es ahí donde se complica la cosa
Obvio....sobre ese planchon de metal hasta a mi me salen costuras hermosas como esas 🤷🏻♂️ donde está la dificultad ahí ?
Bajas la intensidad. 😅
Por cierto que es más fácil en lamina gruesas,pero que haga el mismo cordón con una lamina de milímetro y medio,se le perfora aunque baje el amperaje😬😬😬
Solo hay que probar. Bajar a menos de 50.
Si se puede hacer en una fábrica se puede hacer con un soldador convencional que tenga un regulador de potencia
Милый человек хоть я вас не знаю.Мы не знакомы .Но по отзывам вы светлый человек И просто хочется сказать .Будь просто счастлив .Спасибо за все что вы делаете для людей .Здоровья вам на долгие годы.Надежных и преданых друзей .Что бы вы всегда были нужны кому то .И вас всегда ждали на этом большом шаре .Всех вам благ .Спасибо за вашу проделанную работу .Потраченные силы нервы время .Так держать.Низкий вам поклон .Респект и уважение
Good job brother 👍
very useful, almost the whole video was a black screen
don't you see the melt iron below the arc??
Спасибо за подачу материала. Жаль сварной глухонемой. ))
ممكن سؤال الماكنه الحام ماهيه الدرجه المطلوبه حتى تمعمل عليه
I'm sure the people watching this welding tutorial are already professional welders
É cada coisa que aparece, uma pessoa para soldar como esse cara( o que não é nada demais) precisa ter no mínimo 2 anos de prática, ele divide o eletrodo ao meio para dar a entender que qualquer um vai fazer isso kkkkk!
Realmente não é tão simples assim, comprei uma inversora e estou apanhando muito para aprender a soldar. No meu caso é para ajudar em algum artesanato que pretendo fazer mas está complicado!
Cristóvão Almeida, boa tarde.
Arruma umas chapas sem ferrugem, coloca uma amperagem um pouco mais alta, inclina um pouco eletrodo no início para não agarrar, vai praticando.
Só a prática vai te ensinar.
Toma bastante cuidado com os olhos, queimadura de solda é terrível.
Use eletrodo bom, isso ajuda muito, ESAB por exemplo.
@@afonsobatista5837 muito obrigado Afonso vou fazer isso que você falou. Realmente só a prática e quem vai me ajudar além dessas dicas que você me deu, eu tenho uma máscara de proteção e quanto ao eletrodo vou comprar esse indicado por você.
Muito obrigado fique com Deus!