Solidworks tutorial chain and Sprocket Part3
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- in this tutorial video i will sketch chain and Sprocket Part3 in Solidworks with the help of sketch and feature tools.
1)Solidworks tutorial chain and Sprocket Part1
www.youtube.co...
2)Solidworks tutorial chain and Sprocket Part2
www.youtube.co...
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook pages for drawings.
/ cadcamtutorial
/ cadcamtutorial
after succeeding in your lesson on chain gear, i could feel your accent is beautiful.
You always impress me,excellent! Watched many videos to make this work . Found your videos and things get done as always … thank you very much 😊
NICE CHAINS.
Very well done. How did you go about establishing the precise dimensions for the length of the spline so that the chain links fit correctly? Thank you for sharing your techniques.
Thank you, for this helpful tutorial.
Hi
Thanks for your helpful video. I learn a lot.
Awesone!!!!👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻
i succeeded in finishing as good as your lesson, unless your help, i may not use this one. i much appreciate you
THANKYOU SO MUCH SIR!!!
Thank you very much, it was very helpful.
Thanks,
.
thank you very much. that was awesome
thanks,
i am very thankful man i solved the damn a$$embly.
Thank you so much!
thank you so much sir this helped me a lot 😊😀😀
welcome,
nice tutorial sir
Like a boss!!
Hi
Thank you very much for your tutorials they are very helpful and have helped me improve my Solidworks skills.
May I ask, how does one give an object a shiny look like yours?
És grande!!
Thank you for this awesome tutorial, I tried to make the same but using sprockets with different diameters
Everything was good except for rotating the sprocket with the chain together, I think I missed something I don't know what.
Can you help me ?
By the way, I used Mechanical mate to connect the outer link with the edge of the sprocket as you explained but it didn't work.
This vidio is excellent, can you do belts transmission i have noticed that nobody is done that both wheels rotate with belt in the same direction can you plese do it it will be very usefull for all engineres all over the world
Best Regards.
Sure i will try for belt & chain relation,
thanks .... thanks
Very very good, a low question which criteria gives the dimensions to fit perfectly?
COOL
thanks for teaching!!
Can I ask what is wrong in part 1??
I need to create a simulation of a chain (for bulldover) being rolled up after removal. Is it even possible on solidworks?
I think there will be some change in gear ratio in mechanical mates for perfect motion ..
I need softwares so what I do for software
Thanks sir
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
in 3:08 make the dimension as 0.0625 inch ..
At 25:33 I cant select the center point for some reason? do you now why that may be?
can you please do a tutorial on a oil pumping jack. please! I need it for school
ok let me study,
Can u make dynamic chain and sprocket assembly without chain pattern (in SW2014) please
i will try.
can you please show same rotation job but in Inventor?
Bravo
CAN YOU PLEASE UPLOAD FOR MULTI PLATE CLUTCH TUTORIAL ATLEAST UPTO ASSEMBLY
ok i will try,
please make video for 2013 version
Please,Provide us Drawing files or Display those in your videos for Reference when you design a part. This will be more helpful
Hello Sir. If i use Solidworks 2014, how do i can to make chain with gears. Plz :)
Sir, this chain can be use in bike?
it is non standard chain but we can create & use for bike also,
Dear Friend, please let me know if this project is able to perform in SW 2011?
I can see there is chain pattern, so I guess it is impossIble to make it in SW'11...
possible if chain components pattern command available in SW 2011,
CAD CAM TUTORIAL, Dear Friend, unfortunately, there is no chain pattern in 2011.
chain pattern command is the key roll for animation,
9:25 is this your phone number XD hahaha
jk
this is actually a greate tutorial and its so helpful, keep it up.
@Blaze Malakai bruuuh, I don't even have gf, hack my account if you want XD, that's useless actually unless somebody would be in need of it.
how does your part appears so shiny. please help its urgent. i tried almost everything in the appearance menu
swaroop zanke For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
Thanx
there is a method to do that with any graphics card or even without it, I have gtx 1050ti and its not supported by solidworks for real view, but I could try a method and it works. Just search for "how to apply the real view in solidworks" on yt.
Sir my point axis in assembly is not selected please help me sir
Sir, please allow me to download your video of solid work tutorial for my learning purpose. waiting for your approval.
Could you provide you files for this video, if so Thanks, if not that is okay
nothing chain component pattern on my solidwork, anyone can help me?
Sir plz tell me 2020
autodesk inventor with design tab less than 1 min for this :((
I think it's WRONG my friend. I would very please with you if you will contact to me.
Thanks for all