Husqvarna 395 XP vs 2100 CD - Both Stock
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Filmed right after July 4th, 2020.
Both saws are bone stock. A few new “rubber” components like carb kit, tank vent, oil line, etc. installed on the 2100 as they were most likely original and deteriorated badly.
This the same 2100 seen the previous video on the Hotsaws101 channel -
‘Ol Skool 2100 CD, ‘Ol Skool Axe Trick. It’s 2021!
I reviewed my stash of IPLs. Seems like the 2100 model was introduced in 1978. It’s hard to remember that far back….
Based on the Husqvarna 1100 which came in at 6.2 factor rated HP as far as I know.
Adding to the video dialog and furthering the setting the record straight(er), this 2100CD is a 1984 vintage mo-chine that was used very little. It suffers greatly from the “govenator” (governor) that came on the later saws to keep the rpms limited before the “fancy” coils could do the job. We see it struggling to run above 10,000 rpms but we also watch it only give up 600 rpms in the cut going down. The 2100s suffer from a much smaller venturi in the carburetor than either the 394 or 395. They have a much smaller muffler volume as well as a more restricted internal design.
Under pressure, that is as equal as a man can apply, we watched the 2100 and 395 run virtually the same times going down. Coming up we watched the 395 post a faster time but with EXPONENTIALLY less pressure on the handle bar & pistol grip from the altitude of the test log. As seen in the 2100 coming up, I had the log leveraged on its’ heals quite impressively. The 2100 only dropped 840 rpms. Again, a torque machine the 2100s are.
Stops. Well, down 100 miles ranging from .104 to .114 and reiterating, I take the rakers down free hand.
IMHO the 2100 had the worst of the knots as well.
The HP rating on the 395XP dialog was cut off. Current “factory” number on the website is 6.6HP. Down from the 7.1 of before. Thinking there was a typo issue along the way somewhere…
21.6 pounds for the 395.
23.6 pounds for the 2100.
Just for kicks - the 084 weighs 24 pounds fully fueled. But the design process started on those ~ 10 years later than the 1100 which is the base platform for the 2100. The 2100 is much more compact and maneuverable for the "flick-a-bility" aspect I talk about occasionally. So it's better for limbing and just getting around on steep ground or brushy ground, or both.
Timed runs as follows:
395XP @ 12,480 wot went 8.87 down at 9,840, 8.30 up at 9,420, and 8.40 up at 9720
2100CD @ 9,720 wot went 8.77 down at 9,120 and 9.34 up at 8,880
We will be viewing several more videos of saw-offs with this 2100 running against the “little brother 395”.
I’m currently available for custom saw modifications. Please shoot me an email if you are interested.
danger_cat@rocketmail.com
Thanks for watching.
Hello & thanks for watching. My suggestion would be to take a looksee at the description area. A little furtherance on some of the subject matter is discussed.
I hung up my cork boots in 1975 so both these saws are new to me. The sawmill offered year around employment. My heart is with you though Jack and you continue to amaze us with your knowledge.
you are absolutely right, 288 298 394 395 are also nice for me to work with. 088 is very heavy
The 2100 frame, and the 288 frame are my favorite saws to run. I think I have 8 288 frame saws, and 7 2100 frame saws.
Yes still have two 2100's one running one not so much and two pristine 056 Mag II's. The mag were 97cc as 2100 were 99/100cc's. Had my 2100 built by sawking years ago in Myrtle Creek Oregon when I cut logs for a living, yes pulled the governor port...after that they turned 12 to 12.5....alway cut circles around the 056s. Yes a few videos ago the 500i you had on the table full of Stahls...I noticed that 2100 sitting back behind...I thought wow there a nice old 2100...alway my favorite go to saw...the old Orange Crush or Orange Lead Shed...heavy but my money maker day in and day out....thanks again Shoe in Grant's Pass.
what's behind the brass plug? i can't imagine turning 12,000 with this 2100. what all do you have to do? thx
I found your video and your comments illuminating. I have 4 Husky 2100s, and although I have never run the newer saws, between my 056 Magnum II and the Husky, I also favour the Husky. The reason I found your video, was because I was searching for the trick to disable the governor on my saws. I did learn it at one time, and thought to myself, "I can remember that", so now lack of memory is another thing I am going to have to add to my list of imperfections. .
I have a 390 xp and a 2100 xp that sports a 42" bar for slabbing logs at the saw mill..... 2100 is on the chopping block but it has all new fuel lines and is a low mile saw. Great Video !!
I just bolted on an Oregon 42” power match to my 2100 and chewed on a 38” pine log . It’s one hell of a machine ! I love the cadence of the CD series saws . I have a 285 , 380,288,181se, 268W and 2100 I prefer the 2100 for big timber . Cool vid I learned something I didn’t know . That’s the good stuff ‘ thanks for the information man .
I’m glad I stumbled onto this channel. Best chainsaw review I’ve seen yet. Thanks for the history lessen, I didn’t buy my first Husky until 1986/87 it was a 266xp. Started my tree business in 1992. Run Husky’s for medium to large saws because of the superior vibration system and the decompression release, made them much easier to start when your up in a tree. Ran a 020T and 026 Stilhs. Always wanted a really nice 288, just love the looks of the saw.
The 395xp de rate occurred I believe in 2019. I e-mailed Husqvarna about it and they said the 7.1 hp to 6.6 hp drop was to “help with vibration”
Heck yeh 2100 for the win!
I was weened on 2100’s. I got to go the the gym and cut firewood at the sametime. A larger rim and a shorter bar it would cut firewood pronto. I think I have three 2100’s left. Big bores rock.
Awsome video! Happy New Year Jack!
WoW, i like that 2100!!!👍👍
I have a cd2100, chain brake is broke and gone. Leaks a little oil, perfect for rebuild and tune it up. Now I'm gonna dust it off and check into it. Last I checked parts were impossible to get.
You can still find parts. I have tons of NOS parts ;)
@@romadonezero are any of the parts you have for sale?
Nice, I just picked up a 2100CD. I’m glad I haven’t found a chain brake assembly for it because it has the same wrap as yours. Not that I could find one anyway😂 I do need one for my 480CD however. I heard they interchange, Idk🤷🏻♂️ thanks for sharing!
480cd uses same clutch cover setup as 2100/2101xp. The clutch handle for full wrap bar will extend out too far for a non full wrap handle.
Sounds like the birds in the background were enjoying the show also. 😆.
Brutal saw 💪💪💪💪
for me, she drank 288 and 394, they are great saws, they never broke down
Wish I had more of those old Husky's. We were running the Super Pro 81s and they came out with the 850. I bought a 2100 ( man that thing was heavy) and two weeks later a second one as a spare. The old 81s would stuff the rod through the oiler every so often so you best have a few of them on hand.
84" GB on 2101xp here.. Milling!
Nice brand new 395 and that old hog is a legend
Legend.
Awesome comparison Jack, but was wondering what the CD stands for? Chevy Deluxe? Cheap Date? Carbureted Design? Complete Dominator? I figured I'd ask the Man with the plan. Be safe, thanks in advance.
Chuck hi. Capacitor Discharge. It's regarding the ignition coil.
Thanks for watching.
@@hotsaws101 WOOOOW I thought of many things but that wasn't one. Thanks for clearing this up Jack. Sorry to hear your measuring device took one for the team. My condolences sir.
I had a thin ring 2100 for quite a while. It was my go-to saw for chainsaw milling! Sorry I ever sold it!
@@hotsaws101 no more points.... = CD. = solid state ignition.
Lawnboy referred to their non points ignition as "solid state ignition". Thanks to the EPA they put lawnboy out of business... Because lawnboy mowers are causing global warming. Give me a break. Idiots.
Joe hi.
Technical speaking, the CD stands for capacitor discharge. It is where the concept of solid state comes from. The capacitor style ignition system uses stored energy, not points connecting to complete the circuit "x" degrees before tdc.
Thanks for watching.
I have a 395XP with a ported muffler and she rips. I've seen these older 2100's and I'm intrigued. If you improve the muffler and coil situation, what saw do you think would be better? A mildly improved 2100 or a mildly improved 395?
Stock for stock the 395 will best a 2100.
It takes some work to get a 2100 to run just as good as a bone stock 395.
If you do the same amount to both, the 395 is still going to run better.
Thanks for watching.
love the channel! love the sound the those powerful saws lol makes me hate my homelite super 2, thinking of upgrading but im not sure whats a good saw, anything you could recommend for logs under 16inches?
Husky 550xp is lightweight, nimble and would work for >16, but might as well go with a 562xp since you could put a 24" or 28" bar on it and not bend over as much
Uni hi.
I do think a 346xp would suit your needs also. The nice ones are getting a little hard to find though.
The option of spooning on a 24 seems prudent. At that point, in stock form, you might be down on power.
In the 60cc class, the 562 is hard to beat.
If I was going to pack the weight of a 365xp around, the 372 would be my go-to choice there. A bit overkill for a 16"er, imho anyway.
Thanks for watching.
I have a 550xp and it’s a nice saw but honestly I will just as often grab one of our 51’s or 55’s, they are a great simple workhorse saw and you can still pick up a good one at a reasonable price
@@griley1474 if that’s the case then he might as well go with a 572xp and run up to a 32” bar and bend over even less.
what gives the 2100 so much torque? is it a heavy flywheel design? that 2100 runs really good, as Im sure you know
Cuz its awesome... Excellect cylinder design!
Gentlemen hi.
The rod is really long. That increases the dwell time, which helps greatly. In the '85 and earlier, thin ring versions (this saw) there was a lot less parasitic drag than the later thick ring fitment machines. The windows in the piston are very large allowing good flow from under the dome.
Thinking it is a culmination of many of the inherent engine designs with this battle axe of a saw.
Thanks for watching.
💪💪💪💪👍💣💣
Happy New Year with God dear friend and God bless you! Congratulations for this video. This chain saw 2100 it's amazing, awesome, i'm birth în 1978.
We first run husky in 1978 .
Huck hi. I addressed my miscue in the description when the video was uploaded. Thanks for watching.
Nothing sounds like a 2100/2101xp at idle ;)
Say do you know how to tweak or get rid of the governor on the 395?
Robert D - a 395 doesn't have a "governor". Either in the coil or carb-a-tooter. So, unclear on what you reference.
Thanks for watching.
Oh cool. I thought they do. Thanks
Hello Jack I have a very clean 2100 here if you need a Guinea pig, I'll send it over
would you consider selling it?
@@kimstocks4485 hi. Not really.
Thanks for watching.
Eoin hi. That would be a nice treat.
And them the next thing on the list, my buddy Dave "wood" have to have to get his meathooks on her, LOL.
Thanks for watching.
What length bar do you recommend for 2100s?
28"-32" was considered optimum for efficiency and power output.
If you run anything less than 36" you should use a smaller powerhead. You are lugging around a heavy saw for not really any gain. Ill run a 28" on a ported 372xp vs a 28" on 2100 all day long. The fatigue gets to you with a 2100 series saw.
Don't get me wrong.. I own about 15 x 2100s and 2101s... They were made to cut with big bars...
i put a 36" light weight on mine, big saw for big trees. i can really lean into it...
@@romadonezero admittedly I like to run a 24 inch on my 395xp. I can buck a thousand cords of firewood in about 5 minutes haha.