i'm afraid i didn't find the temperature setup in the programming mode. like in the video above when you went through menu i didn't see it on your machine. i have a carimali tema style e2 from 2010, and is the same menu like in your video. it is any other programming mode or other combination on the keyboard? do you have a manual that you can help me with it? many thanks!
hy, great info video. I still have a question about the tempeature of the boiler. you say that is 110 degree, and the pressure of the boiler is somewhere at 1bar. how can I lower the temperature or the pressure in the boiler? thanks!!!
Hello Peter- We have just purchased a gently used Carimali Kicco machine for our church lobby. The machine is in fine working order but the plastic side pieces are cracked and will no longer stay in place. I have looked everywhere, but hope you may know of a dealer in the US from whom I can purchase new side pieces? The front back and sides are all stainless/chrome so color does not matter much. Google doesn't show me a Carimali dealer in the US but there must be one, right? Thanks for any help...and we will use your video tutorial to train our folks on how to use the Kicco. Thom
I have same coffee machine I removed the cell from the card and it’s working but it says traditional v3.3.3 and date after I press enter it says pre.inf on and stucks There no matter what I press it doesn’t do anything?? Please help
I have th same machine I replaced the cell on the card now when I turn on it shows traditional v3.3 and date after I press enter the displays show traditional pre.inf .On and stucks there no matter what I press it does nothing
Hi, could you tell me how to adjust the temperature? Mines over 120 degrees Celsius and only produces steam from the group heads. Amy help would be appreciated
Hi German You have a blockage to your heat exchangers, either in the water wheel or where the mains water feed to the heat exchangers is located, you will need to clear the blockage so water can flow through the heat exchanger, the jest in the group heads may also be locked with calcium Regards Pete
Appreciate the heads up. I’ve water coming but pressure isn’t good. I’ve seen people with tank machines run a descaler into it and soak for 20 minutes or so. And way of doing something similar with a mains water machine?
hello sir, greetings to meet us from macovice coffee machine repair from Indonesia if i may ask for the tecnical password la carimali kicco At this time I haven't gotten the password If you wish, could you please share the answer? thank you for your understanding stay healthy
Hi Bogdan, simply enter the programming mode and lower your temp in the boiler,
i'm afraid i didn't find the temperature setup in the programming mode. like in the video above when you went through menu i didn't see it on your machine. i have a carimali tema style e2 from 2010, and is the same menu like in your video. it is any other programming mode or other combination on the keyboard? do you have a manual that you can help me with it?
many thanks!
hi peter good day
how to hard reset my carimali coffee machine since there is password and it is in german language
hy, great info video. I still have a question about the tempeature of the boiler. you say that is 110 degree, and the pressure of the boiler is somewhere at 1bar. how can I lower the temperature or the pressure in the boiler? thanks!!!
Hi. Can you please help us Our CM280 Clean display stays ON.even after cleaning Group and St..hope you can.help us pls. Thanks
Hello Peter- We have just purchased a gently used Carimali Kicco machine for our church lobby. The machine is in fine working order but the plastic side pieces are cracked and will no longer stay in place. I have looked everywhere, but hope you may know of a dealer in the US from whom I can purchase new side pieces? The front back and sides are all stainless/chrome so color does not matter much.
Google doesn't show me a Carimali dealer in the US but there must be one, right? Thanks for any help...and we will use your video tutorial to train our folks on how to use the Kicco.
Thom
Hi ThomBest you contact Carimali Directinfo@carimali.com
I have same coffee machine I removed the cell from the card and it’s working but it says traditional v3.3.3 and date after I press enter it says pre.inf on and stucks
There no matter what I press it doesn’t do anything?? Please help
I have th same machine I replaced the cell on the card now when I turn on it shows traditional v3.3 and date after I press enter the displays show traditional pre.inf .On and stucks there no matter what I press it does nothing
I ve also tried pressing Esc and + together
Hi, could you tell me how to adjust the temperature? Mines over 120 degrees Celsius and only produces steam from the group heads. Amy help would be appreciated
Hi German
You have a blockage to your heat exchangers, either in the water wheel or where the mains water feed to the heat exchangers is located, you will need to clear the blockage so water can flow through the heat exchanger, the jest in the group heads may also be locked with calcium
Regards
Pete
Appreciate the heads up. I’ve water coming but pressure isn’t good. I’ve seen people with tank machines run a descaler into it and soak for 20 minutes or so. And way of doing something similar with a mains water machine?
hello sir, greetings to meet us from macovice coffee machine repair from Indonesia
if i may ask for the tecnical password la carimali kicco
At this time I haven't gotten the password
If you wish, could you please share the answer?
thank you for your understanding
stay healthy
Hello! Great video. Do you need a coffee technician repair engineer? Ready to work in your company. :-)