Rockin' the jeans and boots. My collection is almost all Rev'it. My Rodeos are in the shoe shelf right now, 'cause rockin' the Stylmartin Rocket. Saw it on Revzilla too. Like your vids and reviews.
My store bought jeans are all size 34/34. I tried these L2's on in size 34/34 and they did fit but were snug but maybe too snug to comfortably wear the hip armor. So I tried on the 36 waist/34 leg and they fit perfect. The leg dimensions between the 34 and 36 are the exact same however. And even though these are called "slim" fit, make no mistake....THESE ARE SKINNY JEANS. As was evidenced by my two friends laughing their asses off when I came out of the dressing room. I bought them. I've owned other big name riding jeans before but these fit and feel the best. I have yet to ride with them in hot weather so I cannot comment. Spend the extra money.
Does the 32 length compared to the 34 change the placement of knee armor ? I need a 28" waist that only comes in the 34 length... I would have to get the hemmed to 30-31" length but worried that the knee armor would be to low... Any suggestions ?
I’m a 30 but they were WAY too tight. Got 32 and they’re kinda big, but a belt fixed that. I’d say go an inch up. I usually use 32 length but too short on the bike. 34” is perfect on the bike. I’m slim so they’re kinda baggy compared to every day jeans. They’re very thick and heavy but seem to be made very well. Knee pads are low when standing but are in the right spot on bike.
Hey Revzilla! I really liked those jeans but I'm afraid they would be too slim for me because my legs are a bit to the athletic side. My measurements are: Waist: 35.4" Hip: 41.3" Thigh: 24.4" The size chart from REV'IT indicates the 34, but do you think it would be too slim on the legs? Is there any stretch on these jeans? Thanks!
The REV'IT! Rockefeller Jeans give the most protection, though they use the flexible Seesmart armor. The older thicker armor used on previous generation REV'IT! jeans is still CE Level 1 for impacts, so it has the same safety as the newer thinner Seesmart armor. -DrewZilla *www.revzilla.com/motorcycle/revit-rockefeller-jeans
These in 28x34 might put the knee armor too low for you, so consider Dainese instead. -DrewZilla *www.revzilla.com/motorcycle/dainese-todi-slim-jeans *www.revzilla.com/motorcycle/dainese-tivoli-regular-jeans *www.revzilla.com/motorcycle/dainese-bonneville-regular-jeans
So I normally wear a 32x32 in all my jeans. Would these fit similar to them. The sizing guide on Rev’it website is unclear. And your website sizing chart is for textile pants. Thanks. Great videos, keep it up.
I recommend a 32x32 for you in the Lombard 2 Jeans. I wear size 34 waist jeans and wear these in a 34 waist. -DrewZilla *www.revzilla.com/motorcycle/revit-lombard-2-jeans
I ordered these in a 32/32, that is the size jeans I wear, but I would say the waist is more like a 35. Do they run that big, or did I get a pair that the size is off?
See my response to your previous comment. I'll add, though, that these Lombard 2 Jeans are also good next to the Alpha Chinos, RokkerTech, and Saint Model One Jeans. -DrewZilla
There is a little bit of stretch in the waist, but there isn't as much stretch as the Critical Mass Jeans. This Cordura denim is stronger than the Critical Mass Jeans' denim though. -DrewZilla *www.revzilla.com/motorcycle/revit-lombard-2-jeans
I've linked our return policy below. As long as you don't wear them out on a ride, you can return them within 30 days. We definitely recommend you try them on at home. -DrewZilla *www.revzilla.com/returns
If you want to fit D3O, you may need to trim the armor to sit comfortably. The armor pockets are really designed to fit REV'IT!'s Seesmart armor. -DrewZilla
Rockin' the jeans and boots. My collection is almost all Rev'it. My Rodeos are in the shoe shelf right now, 'cause rockin' the Stylmartin Rocket. Saw it on Revzilla too. Like your vids and reviews.
How do you like the Rodeo compare with the Stylmartin?
I hope we keep seeing more of this kind of cut and incognito for riding jeans.
..too slim in the leg for my taste
My store bought jeans are all size 34/34. I tried these L2's on in size 34/34 and they did fit but were snug but maybe too snug to comfortably wear the hip armor. So I tried on the 36 waist/34 leg and they fit perfect. The leg dimensions between the 34 and 36 are the exact same however. And even though these are called "slim" fit, make no mistake....THESE ARE SKINNY JEANS. As was evidenced by my two friends laughing their asses off when I came out of the dressing room. I bought them. I've owned other big name riding jeans before but these fit and feel the best. I have yet to ride with them in hot weather so I cannot comment. Spend the extra money.
Detroit or these Lombard 2? Pros and cons of each? (Looking for a slim tailored look)
Update, Rev'it has a black Lombard 2 in production and is on the Dutch market, F.Y.I.. Going to purchase the black (dark grey) early next month.
Yes, we have the Dark Grey as well. -DrewZilla
*www.revzilla.com/motorcycle/revit-lombard-2-jeans
i wear 32-33/32 what would be good size?
Does the 32 length compared to the 34 change the placement of knee armor ? I need a 28" waist that only comes in the 34 length... I would have to get the hemmed to 30-31" length but worried that the knee armor would be to low... Any suggestions ?
I’m a 30 but they were WAY too tight. Got 32 and they’re kinda big, but a belt fixed that. I’d say go an inch up. I usually use 32 length but too short on the bike. 34” is perfect on the bike. I’m slim so they’re kinda baggy compared to every day jeans. They’re very thick and heavy but seem to be made very well. Knee pads are low when standing but are in the right spot on bike.
Hey Revzilla!
I really liked those jeans but I'm afraid they would be too slim for me because my legs are a bit to the athletic side.
My measurements are:
Waist: 35.4"
Hip: 41.3"
Thigh: 24.4"
The size chart from REV'IT indicates the 34, but do you think it would be too slim on the legs? Is there any stretch on these jeans?
Thanks!
Yes, there is a bit of stretch. You should be able to fit size 34, but if you want a bit more room, consider size 36. -DrewZilla
RevZilla thanks! What about the Alpha Chino? Brian wears a size 33 in the video, would the 34 be "less slim" than the Lombard 2 in 34?
Yes, the Alpha Chinos have a little bit more room. -DrewZilla
for this 175 cm 74 kg is it ok 32 32
Hi, what model of revit jeans that gives almost 100% of protection, and if there are hard armors for revit jeans?. Thank you
The REV'IT! Rockefeller Jeans give the most protection, though they use the flexible Seesmart armor. The older thicker armor used on previous generation REV'IT! jeans is still CE Level 1 for impacts, so it has the same safety as the newer thinner Seesmart armor. -DrewZilla
*www.revzilla.com/motorcycle/revit-rockefeller-jeans
thank you for the reply
I normally wear 28" waist and 32" leg turned up, but these are only available in 34" length. Could you suggest the best solution for myself?
These in 28x34 might put the knee armor too low for you, so consider Dainese instead. -DrewZilla
*www.revzilla.com/motorcycle/dainese-todi-slim-jeans
*www.revzilla.com/motorcycle/dainese-tivoli-regular-jeans
*www.revzilla.com/motorcycle/dainese-bonneville-regular-jeans
So I normally wear a 32x32 in all my jeans. Would these fit similar to them. The sizing guide on Rev’it website is unclear. And your website sizing chart is for textile pants. Thanks. Great videos, keep it up.
I recommend a 32x32 for you in the Lombard 2 Jeans. I wear size 34 waist jeans and wear these in a 34 waist. -DrewZilla
*www.revzilla.com/motorcycle/revit-lombard-2-jeans
Hi
Is this full rise or mid rise?
I ordered these in a 32/32, that is the size jeans I wear, but I would say the waist is more like a 35.
Do they run that big, or did I get a pair that the size is off?
They run a bit loose in the waist honestly, so you might need a smaller size or different model. -DrewZilla
@@RevZilla I used a tape measure to measure my waist and its 32. Should I get these jeans in 32 or size down?
im typically a 31x32, a side revit does not make. should I got with a 32x32 or 30x32 in these
I'd probably go for the 32x32, because these won't stretch as much as regular denim. -DrewZilla
*www.revzilla.com/motorcycle/revit-lombard-2-jeans
Are these the closest I can get to black skinny jeans (dark grey color) that have decent protection?
See my response to your previous comment. I'll add, though, that these Lombard 2 Jeans are also good next to the Alpha Chinos, RokkerTech, and Saint Model One Jeans. -DrewZilla
Good luck getting them over boots!
Are these Lombard 2's the same cut as the Rev't Alpha Chino pants?
They aren't exactly the same, but they are pretty similar. Similar enough that I can wear either comfortably. -DrewZilla
*bit.ly/Lombard2Jeans
Are these Jeans or the Rev'It Alpha RF Pants more comfortable?
For me, both are really comfortable, as both have a bit of stretch and a similar fit. -DrewZilla
is the waist stretchable like in Speed and Strength Critical Mass Jeans
?
There is a little bit of stretch in the waist, but there isn't as much stretch as the Critical Mass Jeans. This Cordura denim is stronger than the Critical Mass Jeans' denim though. -DrewZilla
*www.revzilla.com/motorcycle/revit-lombard-2-jeans
can you replace the armour with d3o?
No, the pocket size is not same as D3O. Plus, these are cut too slim for thick D3O. -DrewZilla
What boots is HVB wearing? They look gorgeous.
They're the REV'IT! Rodeo Boots in black. -DrewZilla
*www.revzilla.com/motorcycle/revit-rodeo-boots
This is why I love Revzilla. Thanks Drew!
How is your return policy if the jean do not fit?
I've linked our return policy below. As long as you don't wear them out on a ride, you can return them within 30 days. We definitely recommend you try them on at home. -DrewZilla
*www.revzilla.com/returns
Do these Rev'It pants jackets and shirts fit 3DO armor padding?
If you want to fit D3O, you may need to trim the armor to sit comfortably. The armor pockets are really designed to fit REV'IT!'s Seesmart armor. -DrewZilla
thanks Drew.
@@MrDeezi This is 2 years old but figured I'd ask. did you end up with a pair of these and fit 3DO? Thanks!
what CE2 armor will fit in these? I don't care that it'll look bulky
I recommend Knox Microlock CE2: Part 362 Type. -DrewZilla
*bit.ly/KnoxMicrolockCE2_Lombard2
Where's the jeans he mentioned about waterproof at 5:21?
nvm, just found
love your reviews! but please unplug those jeans from that guys ass. Not easy to see how they fit the back when they are pulled up to hes shoulders.