I've watched about 100 videos at this point and this is finally the one that helped me resolve the issue by sucking the air through the waste tank tube. I appreciate you more than you know!!!
Hello I need help please I have the L1800 my white barley printing I've done head clean and capping station cleaning when I pull from the ink tank it's black I was told it needed to be gray how can I find the blocked area
Did you flush the print head?? Sound like you need new printhead, probably have to buy one every 3 months. Do you have humidifier, really ….. to save you headache…. Get rid of that printer. It’s not worth the time and effort. You better off buying transfers from someone else.
Oh ok you a little ways away. My printer isn't printing out the white ink now and I just don't know what could be causing the problem. It looks like it's some air bubbles in the hose.
![[TH] 2024 PMSL SEA W3D1 | Fall | สัปดาห์ตัดสิน ทีมไปไฟนอล](http://i.ytimg.com/vi/ZBU3GyzqErI/mqdefault.jpg)
I've watched about 100 videos at this point and this is finally the one that helped me resolve the issue by sucking the air through the waste tank tube. I appreciate you more than you know!!!
Thanks, you saved me a lot of time. I didn't think about the air in the lines.
🤞🏽
Thank you so much!!!!!!!!
Hello I need help please I have the L1800 my white barley printing I've done head clean and capping station cleaning when I pull from the ink tank it's black I was told it needed to be gray how can I find the blocked area
Did you flush the print head?? Sound like you need new printhead, probably have to buy one every 3 months. Do you have humidifier, really ….. to save you headache…. Get rid of that printer. It’s not worth the time and effort. You better off buying transfers from someone else.
Skeet skeet
Where are you located?
GA
@phineeprints9840 OK how far from Atlanta?
1 hr and a half (Columbus)
Oh ok you a little ways away. My printer isn't printing out the white ink now and I just don't know what could be causing the problem. It looks like it's some air bubbles in the hose.
@anthonyjones6013 probably need new printhead