When this happens we just kept doing print head cleaning over and over and over and also printed about 10-15 pocket size prints to get it flowing. It will finally get going again and printing white. Keep in mind we also fully clean the print head and suction out all the colors to help with any bubbles or minor clogs. Its time consuming but it works. I do agree that you have to print at least 1 thing a day. At least a pocket size print. We normally do sports logos that we can add on plain shirts so they don't go to waste.
Thank you so so very much. How about today I had this problem and today this video popped up. Thank you again. You have really helped me. I am back up and running. White ink is working.
Thank you for that video on white ink, just got my printer wasn't using it much then the white ink stop flowing. Now I have to figure out how to get the red hue out of the face of people of color prints.
Hello, I have the procolored A4. was just wondering what ink do you use, after you use the ink that came with the printer what ink did you find that works best for you?
Hi angel thank you for the video very helpful. could you do video how you start the morning and how you end at the day with the printer . also do you use procolored inks? thanks steve i bought the procolored 1390 have not started printing with it yet.
Have you had any issues with black ink getting in your white dampers? I've had to replace one twice now. Ugh and it took me forever to get ink to flow back through it. My fingers are so sore. Lol
Hello. I just tried this bc while printing my black and white started getting lighter and lighter (i did print out alot of prints almost 20 in a row). I did multiple head cleanings and usually after 2 my white comes back but every head cleaning my lines were looking spotty and still no white. i found your video and just tried that flush. the colors look better but i still have no white. in fact my white spots have little black tiny lines on it. any clue as to what is going on with mine? i just put new ink in and can't really afford for it to keep being wasted
I’m having to do a flush every day to get the white ink to go. I’m also pulling ink from the damper and shaking the ink. Is this normal daily maintenance?
Angel, I order my printer after I saw you video, I got it last week, is working fine, my came with a push button on the right upper corner of the lid, do you know what is it for?
Is to keep the white ink mix on the ink tank only, two motors one for each tank will pull ink from the bottom and exit from the top. That way you don’t have to do it by hand.
I just received my L805, when the white circulation words does it make a sound, and do keep your printer on all of the time or turn it off when your not using it
I did your method and the white came back, thank you. But now I'm getting this weird streaking near the bottom of my print. Any kind of fixes for that?? Much appreciated.
i have a 1390 Stylus photo panda dtf machine from procolored and the white ink doesnt work i have done every maintainence and the white is not working either i have replaced the printhead because tech support told me thats what it needed done and still no white i have done the ink charge and still doesnt work any suggestions on getting it back up and running?
I’ve tried everything and it’s not printing at all just light blue and my white is not solid like before I’ve had it a week and now it’s messing up I’ve kept up with it and idk what else to do
I can't do power ink flush because I had to restart before it went on...now it won't let me do it for another 12 hours. Is there a way to bypass this setting?
Hello, did you do anything special for the head cleaning? I tried and my L1800 makes a loud screech sound like it got stuck then gives an error? Do you have to someone how unlock the ink cartridge carriage ? Machine is brand new from procolored. Only had it one day. Thanks
When you say empty this, you are talking about the ink after the power flush, right? But is it wasted? Seems like you did a flush so quickly after your purchase?
I just received mine and i dont know what i am doing wrong. The white is not printing at all. I have done every maintnenance, that can be done and its still not printing the white. My next option is customer support
@@Jaaneybeaar You truly need to contact their customer support. I'm having the same issues and I have been skyping with them for the past 3 nights. They are very supportive.
The caloric and pigmentation of white is completely different. All these dtf printers have this problem because the print head is not intended for white. Unless you have a 30K+ then there are prints where you don't have problems.
Do not waste your money!! This system is a MONEY PITT!!! The unit lasted 5 months. The oven only barley 1.5 months. I spent nearly 5k on this system and to find out the print head is used- remanufactured and they want to charge nearly 2 thousand dollars to replace it only a few months later. The user manual are generic. The system is generic and the support is via Skype and the late hours of the night. If you don’t mind wasting thousand for nothing in the end but a useless box to look at then maybe this is for you, if your smart you won’t waste your money. I was so excited when I started this journey, now nothing but devastating results and thousands of dollars lost. Don’t purchase a pro colored Dtf printer, it’s a money pit!
I just want to say thank you! I struggled for over a month and finally got white ink printing!
Me too OMG this company has to do a better job with helping people who purchase their products.
When this happens we just kept doing print head cleaning over and over and over and also printed about 10-15 pocket size prints to get it flowing. It will finally get going again and printing white. Keep in mind we also fully clean the print head and suction out all the colors to help with any bubbles or minor clogs. Its time consuming but it works. I do agree that you have to print at least 1 thing a day. At least a pocket size print. We normally do sports logos that we can add on plain shirts so they don't go to waste.
Thanks for the TIP. Cause i have this trouble after not printing for 2 days 😢….I hope it wil work for me.
@@hensali78did it work?
This video was very helpful. I was wondering why my white wasn't printing. I did a power flush and I'm back in business. Thanks alot.
Right on time! I purchased the A3 and it’s here but I been nervous about the maintenance. Thanks for the video I really appreciated 😊
Thank you so so very much. How about today I had this problem and today this video popped up. Thank you again. You have really helped me. I am back up and running. White ink is working.
Thank you so much for this video. It was so helpful when I was about to lose my mind. I just for my Procolored L1800 and still learning how to use it
You’re so amazing I am glad I found your channel. Whew Thank you so much. I have been going through heck! Trying to figure this out
I just followed your instructions and it worked like a charm. Thank you. 🙏🏽
Thank you for that video on white ink, just got my printer wasn't using it much then the white ink stop flowing. Now I have to figure out how to get the red hue out of the face of people of color prints.
I'm very happy for your video. I followed carefully and resolve the white color issue in my DTF printer. so, my white color printing now.
Thank you I’m brand new to dtf this helped me immensely I literally just added software today & my white wasn’t working ❤
My white for words and pictures isnt working. I just got it
Hello, I have the procolored A4. was just wondering what ink do you use, after you use the ink that came with the printer what ink did you find that works best for you?
Hi angel thank you for the video very helpful. could you do video how you start the morning and how you end at the day with the printer . also do you use procolored inks? thanks steve i bought the procolored 1390 have not started printing with it yet.
Hi Angela thanks for your videos
I have a Procolored DTF printer and I trouble with a red light coming on.
Any suggestions
I did a power flush and it’s still not printing white - what should I do?
Hey did you figure it out? I am having this same issue
Have you had any issues with black ink getting in your white dampers? I've had to replace one twice now. Ugh and it took me forever to get ink to flow back through it. My fingers are so sore. Lol
Hello. I just tried this bc while printing my black and white started getting lighter and lighter (i did print out alot of prints almost 20 in a row). I did multiple head cleanings and usually after 2 my white comes back but every head cleaning my lines were looking spotty and still no white. i found your video and just tried that flush. the colors look better but i still have no white. in fact my white spots have little black tiny lines on it. any clue as to what is going on with mine? i just put new ink in and can't really afford for it to keep being wasted
Mahalo for your videos, I just purchased that printer, its on its way....
I’m excited for you ☺️
@AngelBDesigns how do you get a nice thick white top coat for pressing on dark shirts?
@@washingop7892i have my white setting set to 100%
Does it still work you you a year on
Would the white issue not printing apply to any printer? I have an epson xp15000
I am struggling with my red it is printing orange any tips on that
I’m having to do a flush every day to get the white ink to go. I’m also pulling ink from the damper and shaking the ink. Is this normal daily maintenance?
Angel, I order my printer after I saw you video, I got it last week, is working fine, my came with a push button on the right upper corner of the lid, do you know what is it for?
That is for priming the ink tube bud.
Is to keep the white ink mix on the ink tank only, two motors one for each tank will pull ink from the bottom and exit from the top. That way you don’t have to do it by hand.
thank goodness I found your video!! Problem solverd...=) I subscribed!
solved
I just received my L805, when the white circulation words does it make a sound, and do keep your printer on all of the time or turn it off when your not using it
Thanks so much needed to see this video ❤
I did your method and the white came back, thank you. But now I'm getting this weird streaking near the bottom of my print. Any kind of fixes for that?? Much appreciated.
My panda printer is doing the same exact thing bro. Have you figured out how to get a thicker white coat for the top of the print yet ?
Hi, I follow all the steps and my white is still not showing. What else do I need to do to fix my issue
What if I don’t have the power flush and for some reason it says I have no ink but I do? Would you know this? I can’t find any video on it
How do I get the print on the left to be aligned correctly? It’s cut off
i have a 1390 Stylus photo panda dtf machine from procolored and the white ink doesnt work i have done every maintainence and the white is not working either i have replaced the printhead because tech support told me thats what it needed done and still no white i have done the ink charge
and still doesnt work any suggestions on getting it back up and running?
Where is the software. I have the printing interface
😃 Thank you, thank you, thank you!!!
What does your DTF print feels like on a tee shirt & can I purchase a sample print from you
I dont have white coming out for my letters and i just got it. It did make a noise at night and had E03. Please someone help
We could see the white lines without the box background lol let me test this out because it been weeks since I used my smh
why does mine only print color but no white layer over it? my motifs come out in color
I’ve tried everything and it’s not printing at all just light blue and my white is not solid like before I’ve had it a week and now it’s messing up I’ve kept up with it and idk what else to do
I cleaned the print head and ran the power ink flush white still does not print. Please help
I can't do power ink flush because I had to restart before it went on...now it won't let me do it for another 12 hours. Is there a way to bypass this setting?
Hello, did you do anything special for the head cleaning? I tried and my L1800 makes a loud screech sound like it got stuck then gives an error? Do you have to someone how unlock the ink cartridge carriage ? Machine is brand new from procolored. Only had it one day. Thanks
I’m in the same position it scared me. I’ve had my printer one week and maintenance it and now it won’t print colors but light blue and light white
When you say empty this, you are talking about the ink after the power flush, right? But is it wasted? Seems like you did a flush so quickly after your purchase?
Thank you so much for this❤️🙏🏽
I have this printer and I can’t seem to get it to work
What are your setting I feel like mine is not correct
nice. thanks
Where did you put the protect ink
My printer only prints out white ink 😅 smh
Same here. No color inks and the color inks are looking horrible.
My white wasn't working all of a sudden so I pulled white ink through the dampers and put the ink back in the bottle. and they started working again.
What are the dampers?
Help me please! Just purchased this printer and the white ink comes out milky and running beyond the colours :(
THANK YOU!!!!!!
hello can you please help? I have a pro color and the software is in but for some reason my image will not RIP.
Hello I have a L805 procolored printer I can not get any ink to go through the printer any ideas or solutions thanks in advance
If you’ve already done a power flush, then I’d contact the company to trouble shoot
Mine
Took less than 1min and its still not printing white
What color settings are you using for the pro rip software you are using
I did the power ink flushing and only half my white printed 😩
didnt come out yet
I just received mine and i dont know what i am doing wrong. The white is not printing at all. I have done every maintnenance, that can be done and its still not printing the white. My next option is customer support
Did you do the flush?
The same thing. I did the flush, still doesn’t work. White ink not printing at all. So stupid I’ve done everything.
@@Jaaneybeaar You truly need to contact their customer support. I'm having the same issues and I have been skyping with them for the past 3 nights. They are very supportive.
Same issue here now. After cleaning etc. did you ever get resolved?
@@roberthanson7124 has anyone gotten this resolved
I’ve tried everything to get mine up and running. Only 2 months old and maybe 100 prints with no resolution from TEC support
Did you manage to work in the end? And how?
Where do you get your ink?
The ink I have now came from Procolored
My color ink isn’t working just white
Which dtf printer is that?
A4
Hello
I keep getting paper jam error and there’s no jam and it’s after everytime I print
Is there a way to fix this
You can try adding painters tape to the top part.
@@AngelBDesigns ok I’ll try that bc it’s frustrating to have to keep fixing
I am trying to use your Code and it is not working for the $200 off?
i am having the same issue's
Can you help me
Why does it only affect the white?
The caloric and pigmentation of white is completely different. All these dtf printers have this problem because the print head is not intended for white. Unless you have a 30K+ then there are prints where you don't have problems.
my printer is not printing anything
Do not waste your money!! This system is a MONEY PITT!!!
The unit lasted 5 months. The oven only barley 1.5 months. I spent nearly 5k on this system and to find out the print head is used- remanufactured and they want to charge nearly 2 thousand dollars to replace it only a few months later. The user manual are generic. The system is generic and the support is via Skype and the late hours of the night.
If you don’t mind wasting thousand for nothing in the end but a useless box to look at then maybe this is for you, if your smart you won’t waste your money. I was so excited when I started this journey, now nothing but devastating results and thousands of dollars lost.
Don’t purchase a pro colored Dtf printer, it’s a money pit!
Is the only solution to replace the print head? I'm experiencing the same issues.
You. Clearly didn’t print enough or clean it.