@@yesyessity318 scrambling properly is faster than hand-scrambling lol there's 12 sides on a megaminx and yet in scrambling theres only 3 types of moves
@@looperover the main problem is to get used to those type of moved and get faster, for me is so unsatisfying to scramble it with those wide moves and uncomfortable because I have low accuracy for it and you have to grip the megaminx from 2 corners and the moves are very weird.
5 ปีที่แล้ว +61
I was literally spamming solves, averaging 1:08, and needed a video like this!
1. Rapid fire tutorials are the best 2. Overlubing was a good recommendation when a top-of-the-line 5x5 was a good Florian-modded Shengshou. It’s not anymore. 3. I need to work on #12, #18 is a good tip that I will incorporate into my solves. I’m doing everything else except I use a well-magnetized Yuxin Purple, and I average 2:25.
I just started 4*4 jperms tutorials are nice after practicing a bit and in less than 100 solves I avg 1:35 pb 1:22 but my total mean is 1:48 because my solves in the starting were like 2:30 you should definitely check jperms 4*4 playlist helped me a lot
I averaged about 1:20 back in February and now I average 1:04 so I’ve made good progress 😄 Edit: at the turn of the year i managed to finally break the sub 1 barrier which was incredibly satisfying
I know all of the tricks shown in this video and i average 1:15, rip. I have a question though, what do you think of the l4e techniques yau solvers use? I am talking about when you slice, insert, slice, and repeat instead of slice, flip, slice which is what redux solvers use.
Tip#26 Flip edges with R U R' F R' F' R or R' F R F' R U' R' on the E slice and U' R' U R' F R F' or U' R U R' F R' F' for the M slice. Don't rotate to flip edges
I need a tutorial on how to follow a big cube scramble without aging 10 years
Lol
I just do hand scrambles sometimes when I’m feeling lazy lmao
It's the main reason holding me back from actually practicing megaminx regularly
@@yesyessity318 scrambling properly is faster than hand-scrambling lol
there's 12 sides on a megaminx and yet in scrambling theres only 3 types of moves
@@looperover the main problem is to get used to those type of moved and get faster, for me is so unsatisfying to scramble it with those wide moves and uncomfortable because I have low accuracy for it and you have to grip the megaminx from 2 corners and the moves are very weird.
I was literally spamming solves, averaging 1:08, and needed a video like this!
Same but slower
Boi you need to break your PR avg
@@ThibaudOU Yes, my PR is very bad. :(
hi naglis
@@727- hi zeny
avoid M-slices ...
I use roux
XD
Learn to consistently do m slices without meessing up on 5x5
Just Don't Do Big Cubes, Or Get An Expensive Magnetic 5x5. You Brought This onto Yourself.
Use a magnetic cube, and practice, it's really no where near as bad as people make it out to be, magnetic cubes make roux perfectly viable for 5x5
Use the Meyer method
Edit: it's a method for 3x3 roux solvers
1. Rapid fire tutorials are the best
2. Overlubing was a good recommendation when a top-of-the-line 5x5 was a good Florian-modded Shengshou. It’s not anymore.
3. I need to work on #12, #18 is a good tip that I will incorporate into my solves. I’m doing everything else except I use a well-magnetized Yuxin Purple, and I average 2:25.
Christopher Baird Let’s try getting this to the top
Christopher Baird then people can see #2 easily
improve on 3x3 then you will get better on 5x5
Wish I saw this before over lubing my new AoChuang WRM 😅
Nice last name (same as mine)
Cubing Encoded: 4. Cleaning up on your rotations
Also Cubing Encoded: literally does a cube rotation every time when he has to flip an edge
You always have to rotate in 5x5 redux. Cleaning up rotations means making your rotations snappier and with purpose.
I'm still not even sub 1 on 4 by 4
Me neither
Lol so am I
@@iyslfj I'm sub-50 on 4x4 but barely sub-2 on 5x5 lmao
I was sub 1:20 on 5x5 before sub 1 on 4x4 lmoa
I just started 4*4 jperms tutorials are nice after practicing a bit and in less than 100 solves I avg 1:35 pb 1:22 but my total mean is 1:48 because my solves in the starting were like 2:30 you should definitely check jperms 4*4 playlist helped me a lot
I switched to Jayden mcneill’s version of yau four months ago, and lowered my time from 3:00 average to 1:35 average; it’s a really good method!
Where is that video?
Look at Jay McNeill’s video of Yau. It’s basically Yau5 but the end of edge pairing is a little different, but a lot more efficient
@@milancubes7020 Kay thanks I'll check it out!
Thanks
I better try
When I get a 5x5
I have a 5x5.
I don’t do 5x5 and don’t think I ever will lol, what am I doing here
lol
@Parity Nightmare even I don't have but I solved it for my friend without help in 20min
Which is embarrassing
I averaged about 1:20 back in February and now I average 1:04 so I’ve made good progress 😄
Edit: at the turn of the year i managed to finally break the sub 1 barrier which was incredibly satisfying
Nice
POV: when u know all these techniques but still can’t sub1😂
Bro's Turning Feels Like Matty's Turning Style!
OMG, I’m sub 3 min on 5x5 and after watching this video, I immediately become sub 1 min. Great video
Don't lie
@@VKCUBED r/woooosh
ya simp
Nice video. I'm very new to 5x5. I get around 4min times. I'm going to start 4x4 and 5x5 trying to get faster.
Good tips.
Me : *Busy with something important *
Cubing encoded uploads
Me : "The thing that I'm doing now can wait"
Wow I actually do multiple of them here, but #25 is what probably what I need to do most!
😂
Any tips on the 1x1? I heard you have to break the very fabric of the universe.
I don't think that's possible, it took me a few weeks and I still can't solve it. It is universally impossible
You need to be doctor strange
i still don't know how to solve it :( so hard bruh
I am going to a comp and it is such a coincidence that u put it out right when I was looking how to get better!!! Great Vid
I love how the thumbnail is literally my 3x3 pb
I’d argue that these are intermediate. I average like 1:50 and I knew most of these already. Great video tho!
I avg 2:30 but i know these
I do these as well
Who else found this encouraging
I know you are a 5x5 expert! Will you do some tutorials or walk through solves please?
I've been using Yau on 5x5, I'm averaging 4 minutes. judging by the 3x3 and 4x4, my goal 5x5 time is 3 minutes average 2:45 single.
How can i improve in 7x7 ? Any tips ? Please, i really want to be better 😃😃😃😃😃
Thanks bro. Now I'm better in solving 5×5.love your videos
lol the second last tip is my main problem. Majority of my 3x3 algs contain S or M moves which is just great of big cubes
Averaging like 1:23-1:24... I’ll get there
Cubing encoded is the new Jperm😂
Just kidding, great video btw
Lol yeah u right
Definitely useful video and I need to work on using these tips
HELLO AVERAGE 56 SECONDS IN 5X5 COULD YOU ADVICE ME TO BE SUB 5O?
I hope that these tips will help me improving my times because I am sub 2:30 wow
You improved a lot!
@@mccardrixx5289 Yes, indeed 😉
@@Stabruder Gestern hab ich ne neue,krasse 3x3 6.12 PB single geschafft!!!
@@mccardrixx5289 Alter was?? 😱😳
@@Stabruder War voll easy gelöst mit Sune und pll skip!
How many tutorials did you make
Actually helpful
Another tip: Improve your 3x3. I don't think I can get under a minute on 5x5 when I average 20 on 3x3.
Tip #18 doesn’t always work to get an easy edge of the last four. It’s pretty rare though
my best was 4 minutes
considering I learned free slice redux a week ago I consider this very good
Thanks for the tips, hopefully they'll help me get faster
Nice!
Tip #13: Maybe, I usually do the white edges first and put them around the white center, so I skip the cross on 3x3 stage.
ok so you're half doing yau
You have the best tips EVER
Redux or yau5?
Can you do some 5x5 Example Solves next?
is reduction better than yau ? yau seems faster oin paper because you dont have to rotate tha much and do cross
Ah yes, tip #23
The natural part to start the video
Thanks TH-cam
Thank u Kevin
Yay! I love videos like this
What method do you use for 4x4 and big Cubes?
Hey is yau5 still a good method for 5x5? I have noticed many tutorials on it are quite old so I’m not sure......
Should i learn Yau5
Im currently using Free slice and i average 2:10 and i dont know is switching would be better
Yau5 is too hard so I gave up
I know all of the tricks shown in this video and i average 1:15, rip.
I have a question though, what do you think of the l4e techniques yau solvers use? I am talking about when you slice, insert, slice, and repeat instead of slice, flip, slice which is what redux solvers use.
Bro when you really average that you are already extremely fast😅
would you recommend yau or reduction
Is the mgc your new main?
I’m not gonna get sub-1 yet, but hopefully I can get sub-1:35:)
Rip yau
Jasper Murray and Hoya
Jasper Murray but many of the tips can be applied
What method do you use.
So I half to practice buying the the mgc 5x5
Is the mgc your main now?
what should splits be?
This tutorial is very good
What splits are usual for sub 1?
step 1 : get a good cube
me : still stuck on first step
I need it for 4×4
M-slices are hard for people on 5x5? cant relate
what lube did you use
I average 1:35 and this I think will really help
I'm watching this video even though I'm barely sub 2 on 5x5 lol
Which scrambling app?
is the auchuang still good
The GTS M? Yes but it's slower than the two cubes he mentioned in the video
how fast do you need to center to get sub 1
Oh very interesting and helpful but i don't have a 5x5
Instructions unclear
Stuck at Tip 1
Im not even sub 1 on 4x4, sad
26.drill the parity alg
Video: *You should get a MGC or a valk 5*
Me who has a budget meilong cube that’s 7 bucks: *Challenge accepted*
What if you use yau?
When you do pretty much all the tips but are barely sub 2 :P
i pause alot cuz i cant find the edge pieces fast
I can do my yj 7x7 faster than my rubiks 5x5
What app is that
is a wushuang good to
Thanks
Tip#26 Flip edges with R U R' F R' F' R or R' F R F' R U' R' on the E slice and U' R' U R' F R F' or U' R U R' F R' F' for the M slice. Don't rotate to flip edges
Two days ago I became sub 1 minute on 5x5
One can only do 100km per hour but you're doing something like 250km per hour!. It would be quite hard for one to learn. Cheers! 😀😎😂
Me who averages 1:05 on 4x4:💀
Welcome to 2020
Bro CubingEncoded I know you little bro he in Chaparral and is my friend.
And i need a tutorial how to understand the yau method lool
👍👍👍👍👍
Bruh I'm struggling with sub-1 on 4×4
Why is this video so short just make it longer and don’t talk fast
get can get wayyyyy more watch time by doing that
Bruh I used all these to get sub 2.30 and know idk how to proceed 😂 . Plus I have a mofangge
I Like This video.
Average: 5 Minutes or something like that.
Tbh this could be applied to 6x6
Im not even sub 1:30 on 4x4
hey that flipping alg is wrong
my problem is only lookahead
For me M slice algs are better than R U algs
I'm using cage method
What if yau
Rouxer Cryes in corner
And i am even worst I don't even have a 5x5