gave me an idea about my rectangle. Swapped the pump to my old sand filter. Now, my old rectangle was 16x36 and circulation ...sucked. I added a second port at the far end. Will add a second line to go to far end but thinking to use that fitting vice the standard jet port. I will have to try both and see what works best. Thinking to make adjustable so higher up for circulation near the top of lower into pool for bottom circulation. Loven when I had a round because debris would all end up dead center, easy to clean. Rectangles and long curved end ones wont do that.
Sorry, no video. But there are many Dremel videos on TH-cam that may help. I used the Rotary Dremel with the sanding drum. I simply sanded the interior of the elbow, checking after a few passes of the fit.
I’ve always felt having the water go in a circular motion would also cause dirt and stuff on the bottom to go to the middle of the pool so I been manually moving my nozzle ever so often.
gave me an idea about my rectangle. Swapped the pump to my old sand filter. Now, my old rectangle was 16x36 and circulation ...sucked. I added a second port at the far end. Will add a second line to go to far end but thinking to use that fitting vice the standard jet port. I will have to try both and see what works best. Thinking to make adjustable so higher up for circulation near the top of lower into pool for bottom circulation. Loven when I had a round because debris would all end up dead center, easy to clean. Rectangles and long curved end ones wont do that.
I've been looking for this for a long time i saw this or one like it a few years ago and never could find it again. So that's a 1-1/2" 45 okay!
On the DRIMMEL which one, what attachment, you Never said. So how do We figure that out....Any video of you Doing it??
Sorry, no video. But there are many Dremel videos on TH-cam that may help. I used the Rotary Dremel with the sanding drum. I simply sanded the interior of the elbow, checking after a few passes of the fit.
I’ve always felt having the water go in a circular motion would also cause dirt and stuff on the bottom to go to the middle of the pool so I been manually moving my nozzle ever so often.
Yes it helps a lot. I'll actually get my kids to do a whirlpool before they get out. Lol 😆.
Can you show it with the pipe installed and pump running?
Yes, I think I need to revisit this and give more video.
Here it is:
th-cam.com/video/thnrwzt374Y/w-d-xo.html
How did you remove the cap? I’m scared it will start leaking if I get forceful with it
The inside cap should screw off.
you could use heat gun no dremel needed
Hmmm, that's possible. I wonder if when it cools would the shrinking make it too tight to remove?
I cannot find the video to show the circulation with the elbow on
Here it is:
th-cam.com/video/thnrwzt374Y/w-d-xo.html
lol.....video with no show.....
I made part 2.
th-cam.com/video/thnrwzt374Y/w-d-xo.html
Intex pool pumps suck!