Thanks man sounds well explained I had night mare digging all iron. I used Garrett at pro b4 and it was a silver magnets so hopefully by listening to u I will start to benefit more on tomorrow's hunt I felt annoyed with machine but it's probably me lol.my whites probe is the best long range speeds up pinpointing thanks for taking time to we'll explain this problem.🤴🏼.
Great video, very informative. if you get time will you do one that explains the faint deep signals that are possibly good targets. i dont seem to have too much of a problem with iron, i do dig it occassionaly, and when i do its either a huge peice or a horse shoe or something circular which i think can trick anybody. Its the weak/deep/faint signals that are possibly good targets where im struggling. i also struggling with whats classed as mineralised soil or iron infested. Ive been detecting for almost 2 years and had the nox for 18 months. I only realy get chance to go out every other week as i live in Greater Manchester and the club i dig with are based in Doncaster. that and lockdown i havent got that many hours in with the Nox. thank you again.
Thank you for taking the time to comment on my videos davd. yes the deeper small faint targets can sometimes sound or turn to a iron signal but sometimes you dig them and it turns out to be a hammerd coin .and sometimes a one way signal as way if you switch to a single frequency say 10 and check ✔ this will help but you really have to digg them iffy singles coss you just never know 😉 and thank-you for watching my channel
Great video and tips! I’m always worried that when I am hearing the tone break with the iron it is possibly a good target in the same hole with a piece of iron. Is this possible to make that tone break for a ferrous and non ferrous target in the same hole? Thanks!
Yes it is possible that can happen always best to dig it out if in doubt you can move the tonne brake to sute your detecting i have mine on 5 tonne and set it on a range 7 to 15 id numbers and give them a higher tonne to help find the smaller hammerd coins .in feild mode 1 and 2 are descrim out you could try and discrim out 3 or even 4 to make it better with them more tricky signals
@@minelabnortherndetexpert1411 thanks! I had just been curious because I just got the machine (running iron bias 1) and I was getting some iffy signals. (Hitting a 22-25 occasionally with some iron mixed in). When I would dig those targets, there would never be a non ferrous target. It was always iron like a nail or bolt. Not sure why the nox likes iron so much and false with it 🤷♂️. I’d say it’s one of its cons, but it has so few cons which makes it an amazing machine
I run iron bias 2 most of the time witch just takes the edge of it a bit .I have found with to much iron bias small deep targets can sound ironie and scratchy at times .I just think the machines are that sensitive you will dig a bit of iron from time to time but they make up for it on them small hammerd coins
Hi just subscribed and hit the notification bell. I am going to buy a nox 800 soon so this will be a great help. Just starting out again after a few years rest. I'm in Lancashire. Are you in Cumbria?
Yes Peter im in Cumbria thank-you for subscribing unearthed uk is allso in Cumbria a great place to buy one and very helpful here is a link to our minelab Facebook group feel free to join need any help just ask on there 😊 facebook.com/groups/416423012634821/?ref=share
I find that iron is often off center in the hole ,never the case for non ferrous,Also if I break the soil and the signal changes then it’s an iron halo .That said I still expect to dig some iron rather than miss borderline good targets .
Yes Andrew correct aways best just to dig it out if in doubt. It is a great machine .it's the hotrock factor that does it for me know other brand can do that 👍👍
I just don't get how people have a problem digging iron with the nox I hardly ever dig iron and I have my iron bias on zero, keep telling people to switch to 50 tones and then they will never have a problem with iron once you learn it, but no one listens 🤷♂️ oh and allways have the iron audio on 👍
Hi James I think is more the new users that have a problem its just a case of getting some hours under you belt and learning the machine thanks you dropping in on the channel mate 👍👍👍
@@minelabnortherndetexpert1411 I’m referring to the introduction music and the closing music, too long and too loud, a couple of beeps of a good silver signal would do lol
Good video about the iron targets . Liked your little cannon find. Len
Thanks denise
Good tips Dave thanks for that and some nice bits coming up to. ATB Paul
Thanks Paul
Thanks man sounds well explained I had night mare digging all iron. I used Garrett at pro b4 and it was a silver magnets so hopefully by listening to u I will start to benefit more on tomorrow's hunt I felt annoyed with machine but it's probably me lol.my whites probe is the best long range speeds up pinpointing thanks for taking time to we'll explain this problem.🤴🏼.
Thanks Ryan it really is a great machine Once you get used to it 👍 happy hunting and thanks for taking the time to comment
Great video, thanks . Very well explained
Thanks Peter 👍👍
Terrific finds buddy keep safe GL&HH 👍
Thanks micky
That's excellent...I will try this on my first time using the nox
Thanks Steven .and thanks for watching 👍
Nice mix of finds there, and good work with the video editing!
Thanks Steve I am slowly getting better with it .hope all is well and stay safe 😎
Seems straightforward….I do like the tones on this machine. Kind on the ears I think. My Racer sometimes likes deep iron too. It can be a pain
It can at times mate but it's the hotrock reduction that's matters to me the most you just don't digg any with the nox
Great video, very informative. if you get time will you do one that explains the faint deep signals that are possibly good targets. i dont seem to have too much of a problem with iron, i do dig it occassionaly, and when i do its either a huge peice or a horse shoe or something circular which i think can trick anybody. Its the weak/deep/faint signals that are possibly good targets where im struggling. i also struggling with whats classed as mineralised soil or iron infested. Ive been detecting for almost 2 years and had the nox for 18 months. I only realy get chance to go out every other week as i live in Greater Manchester and the club i dig with are based in Doncaster. that and lockdown i havent got that many hours in with the Nox. thank you again.
Thank you for taking the time to comment on my videos davd. yes the deeper small faint targets can sometimes sound or turn to a iron signal but sometimes you dig them and it turns out to be a hammerd coin .and sometimes a one way signal as way if you switch to a single frequency say 10 and check ✔ this will help but you really have to digg them iffy singles coss you just never know 😉 and thank-you for watching my channel
Nice i use same settings for coins :)
Thank for watching 👍👍
Good info mate .
Cheers mate
Great video and tips! I’m always worried that when I am hearing the tone break with the iron it is possibly a good target in the same hole with a piece of iron. Is this possible to make that tone break for a ferrous and non ferrous target in the same hole? Thanks!
Yes it is possible that can happen always best to dig it out if in doubt you can move the tonne brake to sute your detecting i have mine on 5 tonne and set it on a range 7 to 15 id numbers and give them a higher tonne to help find the smaller hammerd coins .in feild mode 1 and 2 are descrim out you could try and discrim out 3 or even 4 to make it better with them more tricky signals
@@minelabnortherndetexpert1411 thanks! I had just been curious because I just got the machine (running iron bias 1) and I was getting some iffy signals. (Hitting a 22-25 occasionally with some iron mixed in). When I would dig those targets, there would never be a non ferrous target. It was always iron like a nail or bolt. Not sure why the nox likes iron so much and false with it 🤷♂️. I’d say it’s one of its cons, but it has so few cons which makes it an amazing machine
I run iron bias 2 most of the time witch just takes the edge of it a bit .I have found with to much iron bias small deep targets can sound ironie and scratchy at times .I just think the machines are that sensitive you will dig a bit of iron from time to time but they make up for it on them small hammerd coins
Hi just subscribed and hit the notification bell. I am going to buy a nox 800 soon so this will be a great help. Just starting out again after a few years rest. I'm in Lancashire. Are you in Cumbria?
Yes Peter im in Cumbria thank-you for subscribing unearthed uk is allso in Cumbria a great place to buy one and very helpful here is a link to our minelab Facebook group feel free to join need any help just ask on there 😊 facebook.com/groups/416423012634821/?ref=share
Great video of combating iron , if you can crop it , feel free to post the video on my FB group , or post a link , search for EQUINOX TARGET I.D's 👍
Thanks for watching will pop on later and post have a great Easter weekend 👍👍👍
Nice video good job 👍
Thank you Clifford
I find that iron is often off center in the hole ,never the case for non ferrous,Also if I break the soil and the signal changes then it’s an iron halo .That said I still expect to dig some iron rather than miss borderline good targets .
Yes Andrew correct aways best just to dig it out if in doubt. It is a great machine .it's the hotrock factor that does it for me know other brand can do that 👍👍
Go over settings ? Thanks 😊
Please tell me how you COMBAT iron on a Equinox 900 since there’s no videos directed at that
I just don't get how people have a problem digging iron with the nox I hardly ever dig iron and I have my iron bias on zero, keep telling people to switch to 50 tones and then they will never have a problem with iron once you learn it, but no one listens 🤷♂️ oh and allways have the iron audio on 👍
Hi James I think is more the new users that have a problem its just a case of getting some hours under you belt and learning the machine thanks you dropping in on the channel mate 👍👍👍
Would these settings be any good for ploughed fields?
Nice finds.
Hi Paul yes they will be fine you my won't to up your recovery abit on ploughed land let's say to 6 or 7 👍
Ahh cheers buddy! Shall give them a try tomorrow when I’m out! I’ll let you know the outcome! 🤘
@@paulkinder5099 ok mate brilliant good luck 👍
Settings worked a treat buddy! Didn’t stop digging! Thank you!
@@paulkinder5099 your welcome Paul thank you for supporting my channel mate 👍
did you miss a coin maybe ?? 9:05
Far too much unnecessary noise in the introduction and ending, it’s a metal detecting video not the beginning of WW3 ffs
Point taken Eric thankyou for honest view 👍👍
Far too much nose mate ffs
Witch part are you referring to Eric its one of my older videos this one
@@minelabnortherndetexpert1411 I’m referring to the introduction music and the closing music, too long and too loud, a couple of beeps of a good silver signal would do lol
@@ericjohnson1472 I'm on it 🤣👍👍