Is there a way to move loops around ? I know theres no move button like on the S4 but it’s a must have feature imo. Can it be done with the shift button ? Cheers
I hated the new rotaries so much that it lasted 26 hours before returning. The center nudge prevented me from turning in an effect without a dead zone. And no touchstrip to use anymore. That center nudge is a design error IMHO. Most effects go from 0 to full not from -50 to + 50. Today I drove around 250 miles and obtained an S8. It also has nudged pots in the effect combo's. But these are not nearly as pronounced as the Z1 mk3. All in all an impressive ma(s)chine.
as far as i noticed there’s no gain balance knob between the two sidnals and also no knobs for hp filter( that could be also a belay/noise/rev/ stutter) for the signal. if i’m right, can it be anyhow assigned? thank you.
been looking for your review... lets go... oh you give me more to work with... coming from K2 from A&H but want to be able to daisy chain my F1 to be able to setup more stems and sound effects.. like the new splash screens. for the different topics
Fantastic review! It's very comprehensive and brings me closer to making a purchase. I wonder if NI intentionally left out an audio interface to encourage buying the Z1 alongside the X1. I'm planning a mobile setup, currently using an S2 + 2 F1s. For gigs where I need to fly, I'm considering replacing the S2 with the X1 and Z1 to reduce luggage and using only 1 F1 where needed.
I really like your videos!! ❤️ 19:59 -> Gridlock/Beatgrid . Do you have any video touching that (delicate) subject? I'm pretty new to all this. It seems it's not wise to delete this Beatgrid Hotcue 😅 I figured out you can click it whilst in Preparation Layout, then set Hotcue 2 on the same spot, then click Map and move Hotcue 2 to Hotcue 1. Beatgrid remains, but the Hotcue button turns Blue (Cue), Yellow (Loadmarker) or Green (Loop) so no more weird white Cue-point that I find weirdly white.. My tip for other viewers: Buy a second hand Hercules Starlight and Midi-map that for Track Preparation. It has an amazing amount of configurable buttons and knobs in a mini-format! So you can map it to have all 8 Hotcues, Loop + Move Loop, Beatjump, Set Beatgrid, Tap Beat to correct BPM quickly etcetera etcetera. Maybe @D.A.V.E you already made a video on it? 🙂
I hope they remake the F1 in a similar form factor when the come out with real time stem separation! I was also just watching a Serato vid and the guy was doing "Tone Drumming" or the controller pads were each set at a different semitone. That would be a cool feature on this or a new F1 as well!
The fact that there is no button to expand the collectionbrowser and you can overmap is sad. And I would really miss the track preview from playlist :(
Amazing detail, thank you. I received mine today. The unit is so solid and offers so much. What would you do about headphone monitoring? I've ordered a Z1 as I can't seem to get good monitoring in mixer mode but that's just me.
how you midi map you custom butotn knobs with the function in panel control? i see the midi signal blinking but seems is learn mode in not receiving it - any help someoone? ccould be lovely to custom the control as you wish (midi modeis for external controller)
Completely your choice but see them as quite different units and use them differently. If you bought just one of these you could add it to your set up for the other fx groups for example.
@@DAVEDigitalandVinylExpert thanks for the fast reply! my dream would be some stand alone units like the D2 with wheels - basically an s4 mk3 cut in half without the mixer
What would be your personal recommendations for additional hardware setup for playing remix deck in 3/4 and tracks in 4/4 in addition to 2 deck ddj 400controller? I know you were a huge fan of F1. I consider K2 or X1 or F1 with something. I even consider Behringer CMD series :)
@@DAVEDigitalandVinylExpert thanks! Do you think it makes sense to have K2 and F1 or K2 alone is enough? I purchased used F1 to compare it with TouchOSC latest Traktor mapping. If it doesn’t add much perhaps I will keep TouchOSC for remix and stems. As for additional effect controls and 2 decks mixer would you choose X1 mk3 or K2? It would be great to have you reviewed latest TouchOSC official mappings for Traktor btw.
Whichever you prefer tbh. I think the new x1 mk3 is awesome and obviously great for traktor but it all depends on you and your setup. I used to use touchOSC but it was a bit laggy back in the day. I’ll need to check it out again. Do you have a link to the mapping? I used to just make mine up.
@@DAVEDigitalandVinylExpert I ended up with a S4 in the end. Happy with my choice. I think I will use F1 and Behringer Xtouch Mini + win tablet as a portable set. BTW what is your latest course on Traktor? Is it on ADSR or you have others?
Thank you for the review, I know I'm late to the party but just upgraded from the Mk1. Question if you have time... what's the difference between Absolute mode and Relative Mode weird I know
Not a weird question at all. Absolute mode is the one I use. What shows on the external mixer is what is on the software. So like for like. Relative mode has a sensitivity on it so it can move more of less than the physical movement of the fader.
Hey Dave! Thank you for the great deep dive! Just got my hands on this device and I was a li'l lost on the midi mode for it. Tried changing a few functions but failed at it. Also tried to map a few functions with rekordbox but was blank on why it was not responding post. Could you please help with that? Many thanks! :D
@@DAVEDigitalandVinylExpert could you please show us on how we could map this device? Had exactly the same dount! Would be great to have the bpm adjust handy as well
Could this be used for beginners? For some reason I find these ‘analog controllers’ a bit more interesting to use than a typical dj controller.. plus it’s easier to transport
Just bought a Trakror X1 MK3 to use with DJAY Pro and IPAD 7th ❤️ LOVE IT, GREAT TRIO😍. FInish, mapping the controller in IPAD WORTH PERFECT🤙🤙🤙🤙🤙. Have acces of all Neutral Mix in DJay Pro etc... Compact, easy setup, great value under 699$ cdn for the TRIO. Sorry but TRAKTOR 2 on IPAD 🫣🫣🫣 AFTER 1 MIN OF USE, I UNINSTALL😬😬😬
Too bad traktor software is years behind the competition. And the engineers refuse to listen to the end user features request! Why don't you make a video on the state of traktor software. it's so bad, they still haven't fixed the browser flickering bug that's been there for over 10 years now. Still no real time stem separation. Still no tidal integration. Still no flexible beatgrids etc! I hope you make that video
This looks a total hot mess, keys with abstract names, displays too tiny to be readable, clicks you won't hear while playing music, colour led's that flash underneath >.< major eyehell distraction, one thing cool is the kill buttons .. I'd rather buy a midi fighter and map it
Is there a way to move loops around ? I know theres no move button like on the S4 but it’s a must have feature imo. Can it be done with the shift button ?
Cheers
Yes there is. You need the loop encoder on beatjump loop. Then activate loop and then hold shift and turn rotary and it will move said loop 😀
I hated the new rotaries so much that it lasted 26 hours before returning. The center nudge prevented me from turning in an effect without a dead zone. And no touchstrip to use anymore. That center nudge is a design error IMHO. Most effects go from 0 to full not from -50 to + 50. Today I drove around 250 miles and obtained an S8. It also has nudged pots in the effect combo's. But these are not nearly as pronounced as the Z1 mk3. All in all an impressive ma(s)chine.
Dave, this was absolutely fantastic, thank you so much for the thoroughness!
Glad it was helpful!
Thank you for the review. I learned to use the F1 (and others) from your earlier tutorials.
Great review as always! Thanks Dave!
Thanks man. Just bought a pair of these for my Xone 96.
great job DAVE
Awsome as always dude 👌
Thank You! Very useful video... Love It!!!
Good video mate. Very detailed and informative.
Much appreciated!
as far as i noticed there’s no gain balance knob between the two sidnals and also no knobs for hp filter( that could be also a belay/noise/rev/ stutter) for the signal. if i’m right, can it be anyhow assigned?
thank you.
been looking for your review... lets go... oh you give me more to work with... coming from K2 from A&H but want to be able to daisy chain my F1 to be able to setup more stems and sound effects.. like the new splash screens. for the different topics
Fantastic review! It's very comprehensive and brings me closer to making a purchase. I wonder if NI intentionally left out an audio interface to encourage buying the Z1 alongside the X1. I'm planning a mobile setup, currently using an S2 + 2 F1s. For gigs where I need to fly, I'm considering replacing the S2 with the X1 and Z1 to reduce luggage and using only 1 F1 where needed.
I really like your videos!! ❤️
19:59 -> Gridlock/Beatgrid . Do you have any video touching that (delicate) subject? I'm pretty new to all this. It seems it's not wise to delete this Beatgrid Hotcue 😅 I figured out you can click it whilst in Preparation Layout, then set Hotcue 2 on the same spot, then click Map and move Hotcue 2 to Hotcue 1. Beatgrid remains, but the Hotcue button turns Blue (Cue), Yellow (Loadmarker) or Green (Loop) so no more weird white Cue-point that I find weirdly white..
My tip for other viewers: Buy a second hand Hercules Starlight and Midi-map that for Track Preparation. It has an amazing amount of configurable buttons and knobs in a mini-format! So you can map it to have all 8 Hotcues, Loop + Move Loop, Beatjump, Set Beatgrid, Tap Beat to correct BPM quickly etcetera etcetera. Maybe @D.A.V.E you already made a video on it? 🙂
Thanks. I have a whole video on midi mapping and on beatgridding if you checkout my videos. Shout if you need anything and thanks for the support.
could i add this to my dvs setup so i can use the effects, load up tracks etc so i dont need to look at my laptop as much?
Absolutely
I hope they remake the F1 in a similar form factor when the come out with real time stem separation! I was also just watching a Serato vid and the guy was doing "Tone Drumming" or the controller pads were each set at a different semitone. That would be a cool feature on this or a new F1 as well!
Can you map the reverse button to change the hotcues to 5-8 like we can do with the flux button on the MK2?
You can map this like any of the other controllers.
are you sure? how you custom midi mapping? @@DAVEDigitalandVinylExpert
how do i map it to do that? press reverse and the 1-4 buttons show 5-8 hotcues?@@DAVEDigitalandVinylExpert
In the configuration of the X1 you have the option to change the shift+numbers actions, you can set it to 5/6 and 7/8 hot cues
hey is there any way to configure the x1 to control all 4 decks ? i tried modifyng the mappings but couldnt make it work
Hey. Let me have a play and I’ll come back to you.
thx, very nice review.
Miss you Dave x x
can i use it in conjunction with my S2 mk3 to use the traktor fx
💯 this is exactly what i use it for and it pairs with the s2 mk3 really well.
Sadly Flux doesn’t work with the traktor vinyl 😢. I hope they fixed that issue from years ago
The fact that there is no button to expand the collectionbrowser and you can overmap is sad. And I would really miss the track preview from playlist :(
I get what you mean, but (and this not perfect) but you do have it on other devices, if you own one of course.
@@DAVEDigitalandVinylExpert well yes, your laptop keyboard :P
Mixing with just your x1 and a mixer is what it's designed for. Or so I assume.
Amazing detail, thank you. I received mine today. The unit is so solid and offers so much. What would you do about headphone monitoring? I've ordered a Z1 as I can't seem to get good monitoring in mixer mode but that's just me.
Yeah it’s great. The Z1 is a great way to go for the form factor, sound card and headphone monitoring. :-)
how you midi map you custom butotn knobs with the function in panel control? i see the midi signal blinking but seems is learn mode in not receiving it - any help someoone? ccould be lovely to custom the control as you wish (midi modeis for external controller)
Hey. If you check out my midi mapping video, it will apply for this controller as well.
should i swap my D2s for some of theses??
Completely your choice but see them as quite different units and use them differently. If you bought just one of these you could add it to your set up for the other fx groups for example.
@@DAVEDigitalandVinylExpert thanks for the fast reply!
my dream would be some stand alone units like the D2 with wheels - basically an s4 mk3 cut in half without the mixer
Yeah that would be sick!
What would be your personal recommendations for additional hardware setup for playing remix deck in 3/4 and tracks in 4/4 in addition to 2 deck ddj 400controller? I know you were a huge fan of F1. I consider K2 or X1 or F1 with something. I even consider Behringer CMD series :)
The F1’s just work but the K2’s are great. I’ve never used the CMD series. Are they any good?
@@DAVEDigitalandVinylExpert thanks! Do you think it makes sense to have K2 and F1 or K2 alone is enough? I purchased used F1 to compare it with TouchOSC latest Traktor mapping. If it doesn’t add much perhaps I will keep TouchOSC for remix and stems. As for additional effect controls and 2 decks mixer would you choose X1 mk3 or K2? It would be great to have you reviewed latest TouchOSC official mappings for Traktor btw.
Whichever you prefer tbh. I think the new x1 mk3 is awesome and obviously great for traktor but it all depends on you and your setup. I used to use touchOSC but it was a bit laggy back in the day. I’ll need to check it out again. Do you have a link to the mapping? I used to just make mine up.
@@DAVEDigitalandVinylExpert I ended up with a S4 in the end. Happy with my choice. I think I will use F1 and Behringer Xtouch Mini + win tablet as a portable set. BTW what is your latest course on Traktor? Is it on ADSR or you have others?
How do I revert firmware to the X1 MK3?
not sure how to contact you could you do a tutorial on how to set up mikro mk 3 with traktor pro 3 .11
Hi feel free to contact me on digitalandvinylexpert@hotmail.com
hey dave can i use this with a z1 and god to go ? just wondering how can i get the tracks when they out of sync thanks brother
100% you can link this with any other controller.
@@DAVEDigitalandVinylExpert ok but how can u fix de out of sync in some occasions if theres no touch Bar like in mk2
This X1 comes with a nudge function with the arrows buttons, you can change them to nudge or beat jump
Thank you for the review, I know I'm late to the party but just upgraded from the Mk1.
Question if you have time... what's the difference between Absolute mode and Relative Mode weird I know
Not a weird question at all. Absolute mode is the one I use. What shows on the external mixer is what is on the software. So like for like.
Relative mode has a sensitivity on it so it can move more of less than the physical movement of the fader.
Hey Dave!
Thank you for the great deep dive! Just got my hands on this device and I was a li'l lost on the midi mode for it. Tried changing a few functions but failed at it. Also tried to map a few functions with rekordbox but was blank on why it was not responding post. Could you please help with that?
Many thanks! :D
I'll do my best. Email me at digitalandvinylexpert@hotmail.com and I'll see if i can help. 😃
Done 😊
Hey D.A.V.E. how does the integration of the X1 mk3 and the Maschine micro work
I can't find how to adjust the bpm of a track.....surely there's a way.
The only way would be to map it.
press sync and move encoders @@DAVEDigitalandVinylExpert
@@DAVEDigitalandVinylExpert could you please show us on how we could map this device? Had exactly the same dount! Would be great to have the bpm adjust handy as well
Could this be used for beginners? For some reason I find these ‘analog controllers’ a bit more interesting to use than a typical dj controller.. plus it’s easier to transport
Absolutely Alex. These controllers are very user friendly in my opinion.
If you get stuck on anything, just shout. Always happy to help.
does this work with Spinach?
Thanks Dave much appreciated put this toward your next crack pipe 😂
Oh wow. My first ever! Thank you!
Just bought a Trakror X1 MK3
to use with DJAY Pro and IPAD 7th
❤️ LOVE IT, GREAT TRIO😍.
FInish, mapping the controller in IPAD
WORTH PERFECT🤙🤙🤙🤙🤙. Have acces of all Neutral Mix in DJay Pro etc...
Compact, easy setup, great value under 699$ cdn for the TRIO.
Sorry but TRAKTOR 2 on IPAD 🫣🫣🫣
AFTER 1 MIN OF USE, I UNINSTALL😬😬😬
if youre using an external pre amp do you still need to connect via hid ina live setup?
This is only a midi controller and doesn't have a soundcard built in. So you would still need your setup as well.
Hi Dave I had some questions about the MK3 is there a way to direct message you ?
I only have instagram
@@DAVEDigitalandVinylExpert what is the IG ? ty
@@DAVEDigitalandVinylExpert Hi Dave whats your IG ?
@digitalandvinylexpert
Where you been Dave!??
A long story. Hope you're good!
@@DAVEDigitalandVinylExpert glad you’re back
Looks like a huge calculator x
Touch strips not cool anymore? Tiny displays instead? They keep making toys I guess..
mk4 it will be rotaty encoders with led ring so not need turn knob where it should be before nothing change. its dammit 2024!
Too bad traktor software is years behind the competition. And the engineers refuse to listen to the end user features request! Why don't you make a video on the state of traktor software. it's so bad, they still haven't fixed the browser flickering bug that's been there for over 10 years now. Still no real time stem separation. Still no tidal integration. Still no flexible beatgrids etc! I hope you make that video
Still not behind rekordbox tho
Not anymore pro 4
All of that has been solved with 4. Except the flickering bug, of which I've never had and "tidal".
This looks a total hot mess, keys with abstract names, displays too tiny to be readable, clicks you won't hear while playing music, colour led's that flash underneath >.< major eyehell distraction, one thing cool is the kill buttons .. I'd rather buy a midi fighter and map it
There's no way your hearing any device clicks while playing music lol