Cool video mate! My CRF110 is on the way to me! Taking delivery in a few hours🤘 so I’m gonna need some suspension parts and than I’m ready for some pit bike fun👍 Thanks for uploading this vid buddy
AeroR hope this video helps! I definitely recommend bars, stiffer springs, damping rods and the oversized brackets with pegs. That will make the bike handle so much better!
@@sean_cantrell it helps a lot buddy thanks again ! It’s hard to get these parts over here in Germany. So I will buy it from murica🇺🇸 I’ve checked some other parts out but I’m not sure about the stronger footpeg mounts and skid plates! Any suggestions? There is a JTI skid plate for 600€ 😂 and others for round about 110$ Have a good one
Finally someone that was bright enough to have someone help hold the camera while they do it! thanks great vid.
Such an easy simplistic video for us dummies. Thanks bro! Gonna use this when I do my forks
Glad I can help! Like I said in the video, if I was able to figure it out you definitely can also
@@sean_cantrell just did mine yesterday brother. was super easy!
this is extremely helpful for me because I'm hopefully going to do the same. sweet build
I noticed you did not use the bushings that came with the BBR springs. Are they not needed if you use the BBR damping rods?
What happened with the spacer bro ? why did you put it?
Cool video mate! My CRF110 is on the way to me! Taking delivery in a few hours🤘 so I’m gonna need some suspension parts and than I’m ready for some pit bike fun👍
Thanks for uploading this vid buddy
AeroR hope this video helps! I definitely recommend bars, stiffer springs, damping rods and the oversized brackets with pegs. That will make the bike handle so much better!
@@sean_cantrell it helps a lot buddy thanks again ! It’s hard to get these parts over here in Germany. So I will buy it from murica🇺🇸
I’ve checked some other parts out but I’m not sure about the stronger footpeg mounts and skid plates! Any suggestions?
There is a JTI skid plate for 600€ 😂 and others for round about 110$
Have a good one
What’s the background song? It’s kinda catchy.
Do you need a new spring or can you just get the dampening rods and fit them ?
You can do the damping rods only
I weight 110 pounds. I am wondering if I should get adult springs? Thanks
Wouldn’t hurt! Even at 110 pounds I think it’s a must to stiffen up these 110s
Stupid question but if I use the stock dampening rods with the bbr springs how much oil should I put in?
Don’t quote me on it but I would say 150cc
What seat is that? Is that the BBR tall seat?
No review at the end? How much of a difference was it for you? Was it a noticeable difference, do you like the change, is it worth doing?
Huge difference I definitely suggest making these changes to improve the handling and have a smoother ride
Yo did you use the longer bbr dampening rods or just the regular BBR dampening rods
Bbr damping rods
could you use the oil you take out of you front forks or no
You could… I suggest new, clean oil though
Thanks for the video. Is the upgraded rear shock much better? Debating on what to upgrade when mine gets here.
I definitely recommend the rear shock and stiffer springs in the forks. Makes the handling much better and a smoother ride
@@sean_cantrell did both and you are correct! Thanks
What shocks are those and can a 100lb rider use them or are they to heavy duty
It is a dnm rear shock. It is quite a bit stiffer. I’m 150lbs but I do a lot of big stuff on these bikes so I need it on the stiffer side.
@@sean_cantrell does the DNM rear shock increase travel as well, or just stiffen it up? What spring weight did you go with?
when you racing pro?
Sxucey Films sx 2021!
@@sean_cantrell Sick cant wait to see you out there!!
cool