Excellent work gents! I've considered this exact swap in the past on my 2004.5 cummins. Did the 6 speed bold up to the stock 48RE flex plate ok? And how was the clutch pedal assembly done? Is there any video of that. Thanks!
So I've got an 03 4 door with 48re and I've got an 02 with nv56 (full truck) 1.5 door both long beds. I want manuel swap, I've got everything out of doner truck and noticed the transfer case and driveline are alot less beefy from the manuel. Am I able to swap all driveline over or do I need to keep my transfer case and driveline from my 03 but make cuts? And 8f you do by chance know how long my cuts would need to be I'd appreciate it thank you for your time and video
You fill it full of cylicone incase that seal blows out you dont ruin a trans. Itll ketch it and will still drive. If it fills up with water and gunk you didnt seal it properly. I was always told fill the train with cylicone and pack all around the edge with grease so it doesnt stick together
Your ant eater on your shorty can you get your converter to lock in 2nd with the standard valve body? If you could pm that would be awesome man thank you.
Can I use the new clutch and flywheel off my 2001 donor truck with the trans in the 2006 cr or are flywheels to different thanks for any advice here. Broke trying use what I have
Hey man thanks for the great vid. It Gave me the confidence to do my nv5600 swap into my 03 cummins. I even did the 29 spline replacement imput shaft on my t case so I could keep my 271hd. Let me tell you once I had the t case opened up im like wow this is it? Very easy to rebuild for anyone with the right set of tools and lil mechanical skill. Any how my truck is done. And im waiting on my recovery file from smarty to flash my ecm however I can't figure out how to make my reverse lights work again. Did you guys fix that and if so what did you do?
@@chasehall24 83 thousand, jk it’s just not swapping now it’s much easier to go from an auto to manual than it is for a manual to auto. A boy can dream I guess lol
I got this same swap done, the truck runs amazing jus the only issue I am having is finding the wires to tap into for the reverse lights.. is that something you could help me out with
So I have this manual transmission that I want to install, and I know he just made a video on it but honestly how hard was it for you? Like was there an incredible amount of things to do or was it relatively easy
@@kaidenclingenpeel7140 it honestly didn’t take very long and wasn’t very hard, I got the swap done in 2 days. The thing that was a pain in the butt was getting the tuning done but other then that it was pretty easy
Hell yeah bro keep the content rolling!
Where would you recommend to get the ECM flashed for a manual swap?
Same question?
Also want this awnser too
No problems with 4low on the transfer case?
Excellent work gents! I've considered this exact swap in the past on my 2004.5 cummins. Did the 6 speed bold up to the stock 48RE flex plate ok? And how was the clutch pedal assembly done? Is there any video of that. Thanks!
Very nice wish I could flip mine to a manual.
How did you get your 4 low to engage?
So I've got an 03 4 door with 48re and I've got an 02 with nv56 (full truck) 1.5 door both long beds. I want manuel swap, I've got everything out of doner truck and noticed the transfer case and driveline are alot less beefy from the manuel. Am I able to swap all driveline over or do I need to keep my transfer case and driveline from my 03 but make cuts? And 8f you do by chance know how long my cuts would need to be I'd appreciate it thank you for your time and video
Good work!😃
You fill it full of cylicone incase that seal blows out you dont ruin a trans. Itll ketch it and will still drive. If it fills up with water and gunk you didnt seal it properly. I was always told fill the train with cylicone and pack all around the edge with grease so it doesnt stick together
Any updates on your VP truck?
He parted it out
What brand and model number are those tail lights?
So you can use the original adapter plate just have to use a starter spacer right?
I didn't see the third brake light (high mount) light up on the 2nd gen shorty. Was it just the reflection from the ceiling lights or is it out?
Did he use a nv5600 clutch or g56?
Do the cross members bolt up the same
Where did u get the manual tune for the ecm?
Did you buy the hydrolic assembly for a 3rd gen or 2nd gen
How did you mount the 5600 onto the 06/07 cross member?
Your ant eater on your shorty can you get your converter to lock in 2nd with the standard valve body? If you could pm that would be awesome man thank you.
Can you ask mason witch wire on the neutral safety switch he grounded? I just did an nv5600 swap on my 06 this weekend
Did you figure it out? I just swapped my 06 and cant get it to crank. Havent flashed ecm yet either tho
Can I use the new clutch and flywheel off my 2001 donor truck with the trans in the 2006 cr or are flywheels to different thanks for any advice here. Broke trying use what I have
Did you use the the one off of the 01?
Why choose a nv5600 over a G56?
No specific reason just got a good deal on the 5600
Did y’all just buy everything individually or a package kit somewhere?
You can buy a package from st. James auto in Missouri
Have you ever done a nv5600 in a 12 valve? I'm getting ready to do one. Any advice would be greatly appreciated
Did you ever do it?
Hey man thanks for the great vid. It Gave me the confidence to do my nv5600 swap into my 03 cummins. I even did the 29 spline replacement imput shaft on my t case so I could keep my 271hd. Let me tell you once I had the t case opened up im like wow this is it? Very easy to rebuild for anyone with the right set of tools and lil mechanical skill. Any how my truck is done. And im waiting on my recovery file from smarty to flash my ecm however I can't figure out how to make my reverse lights work again. Did you guys fix that and if so what did you do?
I'm doing this with my 03
@justingore9559 what is the part number for the input shaft you bought.
What exhaust is on that truck? I thought about getting a 48re for my g56 truck
How much for the g56?
@@chasehall24 83 thousand, jk it’s just not swapping now it’s much easier to go from an auto to manual than it is for a manual to auto. A boy can dream I guess lol
@@snyderkurtis I'm trying to do the opposite I'll trade all my parts needed for your swap for the same
My southbend chatters like a bastard. Called them and they assured me that's normal. Drives me batsh!t nuts...
Same...really pissed me off. Had I known, would never have gone with SB, chatters bad!
🔥🔥🔥🔥🔥
I got this same swap done, the truck runs amazing jus the only issue I am having is finding the wires to tap into for the reverse lights.. is that something you could help me out with
So I have this manual transmission that I want to install, and I know he just made a video on it but honestly how hard was it for you? Like was there an incredible amount of things to do or was it relatively easy
@@kaidenclingenpeel7140 it honestly didn’t take very long and wasn’t very hard, I got the swap done in 2 days. The thing that was a pain in the butt was getting the tuning done but other then that it was pretty easy
Hey Kyle, what did you end up doing for tuning? Im right dead center of doing my nv5600 swap in my 06
Anyone has a ball park estimate how much this swap would cost
👍👍👍👍👍
Should have had a one piece made.
🚜🚜🚜🚜
Was interested in this swap and leather interior video. Both show absolutely nothing. “We did this” and “that” “Made mistake”. Fkn terrible
Problem with your videos is you show very little and don’t stop talking. Hard to guess.