Hi keith. after washing the manifold, make sure to dry it before reinstallation. The computer will reset automatically since we have removed the battery. When you start the engine, expect higher rpm but it will go back to normal after 2-5 mins drive.
I don't think you want to put that sealant out of a tube on that surface, because the intake seam pieces against the cylinder head get really hot as the engine is in operation
have you clean the valve intake v/vs stem? this is must the carbon accumulated in the stem causes to block the air to enter the combustion chamber, on your video it seems the valve is not being clean, if ever worrying of carbon deposit drop to the piston top you can turn the engine manually until the v/vs is close
Sir tanong ko lang nung naglinis ako ng intake manifold. Nagloko ung idle ko. Pag nka On AC bumababa rpm s 400. Tpos namamatay. Tpos prang may pumupugak sa tambutso pag nka park n umaandar. Nakadyot din pag nanakbo.ano kya problema? Vios gen. 2 din po. Salamat
Hi good evening sir. Possible leaking or hindi nailapat ng tama yung intake manifold during reinstallation. you can check also the throttle body sir bka madumi n rin. Check nyo rin sir yung mga hose kung naibalik ng mabuti. and last is baka may naiwan pang water sa manifold at hindi n dry bago ireinstall.
@@SundayBuddySolutions check ko ung mga hose bukas sir. N dry ko mabuti sir ginamitan ko ng compress air tapos air blower tpos bnilad ko pa.tpos blower ulit bgo ikabit. Malinis nmn throttle body ko.evry 6months naglilinis ako. Nung paghugot ko nung maliit n hose s manifold medyo mahigpit xa.inalog alog ko lng kya nhugot.cguro don ung leak.salamat sir. Update kita if ano nging problema. Stay safe and God bless
Hi Claire! It's normal to expect higher rpm after cleaning the throttle body. The reason is that the clean throttle body allows more air movement in the engine and in response, the computer system in the car compensates by adding more fuel. As a result we observe high rpm. So after cleaning the throttle body, turn on the engine and have at least 2-5 mins ride. after that, the Rpm by that time is expected to go back to normal. if not, try to consider other factors such as improper reinstallation, damaged MAF sensor, etc.... I hope this helps. God bless Buddy!
Yan yung inexpect kong isasama sa paglinis ng throttle body nung dinala ko sa 1 shop yun auto ko.. (@_@) Anyways.. May iba pa bang paraan para malinis yan nang hindi binabaklas? May port ba na pwede pasukan ng carb/throttle cleaner? Or gas treatment na lang para madamay sa linis yan? Salamat. :)
Thanks Sir sa Video. Laki tulong videos mo. Lalo na sa mga naka Vios Gen 2 na kagaya natin. More Power Sir and More Videos to Come. :)
Salmat sir...
Thanks you for your info... I'm from Malaysia I like all video from you...nice...
Thank you so much Mohamed.
Thank you po sir very helpful po
Welcome 😊
Excellent job
Thank you sir
Salamat cabalen sa diy maintenance
Thank you sir and God bless!
Thanks Idol. :)
After wash It need reset computer and do need WAit few hours for dry then install back ? (Toyota altis 2002 1.8cc)
Hi keith. after washing the manifold, make sure to dry it before reinstallation. The computer will reset automatically since we have removed the battery. When you start the engine, expect higher rpm but it will go back to normal after 2-5 mins drive.
@@SundayBuddySolutions true
I don't think you want to put that sealant out of a tube on that surface, because the intake seam pieces against the cylinder head get really hot as the engine is in operation
Hi J well noted but we used sealants that are designed to withstand extreme temperature driven by the engine.
Thanks 🙏 Bossy🇯🇲👈🏾
have you clean the valve intake v/vs stem? this is must the carbon accumulated in the stem causes to block the air to enter the combustion chamber, on your video it seems the valve is not being clean, if ever worrying of carbon deposit drop to the piston top you can turn the engine manually until the v/vs is close
what is the gasket sealer brand?
sorry for the late response, here in the Philippines the brand is Beta Gray sealant.
Anong Brand mg gasket sealant mo Sir?
hi bro, " gasket maker "
Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.
Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.
Hi is this toyota yaris 2007 ? Plz reply. My manifold is damaged cant find it. Plz help. Many thanks
Hello. Nope. It is Toyota Vios. As far as I know Yaris and Vios has the same engine because they are both under the same manufacturer
Sir
Is it 2014 vios ? Made in Japan model ?
@@TheThushan 2012 model yes Japan
Sir tanong ko lang nung naglinis ako ng intake manifold. Nagloko ung idle ko. Pag nka On AC bumababa rpm s 400. Tpos namamatay. Tpos prang may pumupugak sa tambutso pag nka park n umaandar. Nakadyot din pag nanakbo.ano kya problema? Vios gen. 2 din po. Salamat
Hi good evening sir. Possible leaking or hindi nailapat ng tama yung intake manifold during reinstallation. you can check also the throttle body sir bka madumi n rin. Check nyo rin sir yung mga hose kung naibalik ng mabuti. and last is baka may naiwan pang water sa manifold at hindi n dry bago ireinstall.
@@SundayBuddySolutions check ko ung mga hose bukas sir. N dry ko mabuti sir ginamitan ko ng compress air tapos air blower tpos bnilad ko pa.tpos blower ulit bgo ikabit. Malinis nmn throttle body ko.evry 6months naglilinis ako. Nung paghugot ko nung maliit n hose s manifold medyo mahigpit xa.inalog alog ko lng kya nhugot.cguro don ung leak.salamat sir. Update kita if ano nging problema. Stay safe and God bless
@@jeffremacalinao9704 update dito boss pano bumalik sa normal rpm mo?
@@eastnicky9640 sir. Problema nung sakin 2 sparkplug pundi. Kakapalit ko lng ng bago mga 2months plng.kya di ko maisip na sparkplug may problema.
Need ba talaga lagyan ng gasket sir?
Yes sir para po di sumingaw yung hangin
@@SundayBuddySolutions pag sumingaw un hangin sir ano po cause?
@@danmaverickmanalustresmani7494 possible di naibalik or nakapwesto ng maayos yung gasket.
Gasoline or kerosene pwd po pang linis?
Hi Anton you can use gasoline instead. Looking forward to hear your DIY experience God bless.
Gasoline is better sir.
Dapat Boss nagreplace kayo ng bagong Throttle Body at Intake Manifold Gasket. Magkaka air at fuel leak iyan kung hindi na gaanong lapat mounts nila.
Modern intake manifold have sensor at the top, so you cannot use water to clean it, it can cause damage to electric system
Hello! yes that is why the video is only applicable to toyota vios 2012 model. We advice to double check the manifold assembly carefully.
whit what sealant pls
Beta grey sealant. It is a high temperature silicone sealant
@@SundayBuddySolutions ok thank u
Tanong ko lang idol, bakit nag ha high rev vios ko pagkatapos cleaning ko ng intake manifold atsaka throttle body?
Hi Claire! It's normal to expect higher rpm after cleaning the throttle body. The reason is that the clean throttle body allows more air movement in the engine and in response, the computer system in the car compensates by adding more fuel. As a result we observe high rpm. So after cleaning the throttle body, turn on the engine and have at least 2-5 mins ride. after that, the Rpm by that time is expected to go back to normal. if not, try to consider other factors such as improper reinstallation, damaged MAF sensor, etc.... I hope this helps. God bless Buddy!
@@SundayBuddySolutions thank you sir
Yan yung inexpect kong isasama sa paglinis ng throttle body nung dinala ko sa 1 shop yun auto ko..
(@_@)
Anyways..
May iba pa bang paraan para malinis yan nang hindi binabaklas?
May port ba na pwede pasukan ng carb/throttle cleaner?
Or gas treatment na lang para madamay sa linis yan?
Salamat.
:)
Best pa rin bro kung babaklasin para matanggal talaga yung mga carbon at malinis ng maayos ang manifold
Avanza auto ko.
May port yun intake manifold from pcv.
Oks lang ba lagyan ng filter yun?
Saka yun isang port din na papuntang throttle?
Linis !
The gasket always should be replaced.