Happy to hear this was informational for you! Thank you for taking the time to share your feedback. We hope to see you live on one of our upcoming Virtual Lunch & Learns, Wednesdays at noon ET.
For the micros on ccw the function block I have is v0 and it has an input of new set position and command new set position how do I make that work to increment the current position that I am at. I was able to do it at one time but reset drive setting and I am not able to do it again.
Hi Steven, The Kinetix 5100 is able to be interfaced with a Micro 800 in ccw. Please refer to tech note ID: QA46559 rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1091221/loc/en_US#__highlight Or the Kinetix 5100 QuickStart Guide literature.rockwellautomation.com/idc/groups/literature/documents/um/2198-um004_-en-p.pdf For further assistance please contact your local Rockwell distributor.
Hello, There are many different ways the Kinetix 5100 can be controlled by a Micrologix 1400. Explicit messaging, PTO, Analog or Digital I/O are all great options depending on your application. Pages 17 and 18 of the user manual give great examples of typical control configurations. Below is a link to the user manual. If you need further information or assistance on how to set up one of these methods please reach out to your local Rockwell Automation distributor: literature.rockwellautomation.com/idc/groups/literature/documents/um/2198-um004_-en-p.pdf
You set the same IP adress to the PLC. Driver has the same IP adress. I fixed it and it worked. Thank you a lot! (Connected Component Workbench).
Hi Jorge, Glad to hear this was helpful! Hope to see you live sometime during our weekly #McMcLive streams Wednesday at noon.
Informative general overview
Happy to hear this was informational for you! Thank you for taking the time to share your feedback. We hope to see you live on one of our upcoming Virtual Lunch & Learns, Wednesdays at noon ET.
For the micros on ccw the function block I have is v0 and it has an input of new set position and command new set position how do I make that work to increment the current position that I am at. I was able to do it at one time but reset drive setting and I am not able to do it again.
Hi Steven,
The Kinetix 5100 is able to be interfaced with a Micro 800 in ccw. Please refer to tech note ID: QA46559
rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1091221/loc/en_US#__highlight
Or the Kinetix 5100 QuickStart Guide
literature.rockwellautomation.com/idc/groups/literature/documents/um/2198-um004_-en-p.pdf
For further assistance please contact your local Rockwell distributor.
Michael Mclean Hi Ottawa, ON
How to connect with micrologix 1400 plc
Hello,
There are many different ways the Kinetix 5100 can be controlled by a Micrologix 1400. Explicit messaging, PTO, Analog or Digital I/O are all great options depending on your application. Pages 17 and 18 of the user manual give great examples of typical control configurations. Below is a link to the user manual. If you need further information or assistance on how to set up one of these methods please reach out to your local Rockwell Automation distributor:
literature.rockwellautomation.com/idc/groups/literature/documents/um/2198-um004_-en-p.pdf