Hi, thanks, glad you like the video. it has been a wile since my last Tech video for sure. i would do more of other tech videos if i had a camera man. many i want to do i need someone following my hands or other part while i am demonstrating.
Great video! Really explains the contrast controls and adjustments. For the color adjustments, I'm assuming you're adjusting the cut-off pots and not the drive. Also, does it make sense to white balance the way the WG manual has it before adjusting the contrast? Keep making those tech series!
Glad you liked it and found it helpful. yes you primarily only adjust the 3 BIAS pots, if you need to adjust the 2 DRIVE pots you only need to do so to achieve a pure wight and yellow in the game or when using a TPG. i have never used the manual to adjust the chassis as it is very convoluted and with my simple way you achieve the same results. i plan to make more as time goes on and i get the equipment in and repaired to do them.
Hey Arcade Buffet, you are using the pincushion board on a 25” wells but you said you had to change part of the circuit I the board. Would you mind sharing what has to be done to use the pincushion on the 25”? Thanks very much, Adam
if adjustments are not doing what is expected, then either you have a tube problem, a wiring problem, or your chassis needs to be repaired as it has issues in the blue circuit. if the actual game blue parts do not change when you turn the adjustment knobs and just the entire screen changes, i am guessing it is a chassis issue and you need to send it in for repair. but if your chassis has never been serviced it needs to be before it fails or gets worse. please visit my site and email me, thearcadebuffett.com
@@buffett1978 No worries. I think Wight is another name for a ghost in D&D. Feel free to kill my comment altogether. Just wanted you to see the correction. :-)
Hey Mr buffett .. love the tech series vids please keep them coming .. it's been a while 👍
Hi, thanks, glad you like the video.
it has been a wile since my last Tech video for sure.
i would do more of other tech videos if i had a camera man.
many i want to do i need someone following my hands or other part while i am demonstrating.
Great video! Really explains the contrast controls and adjustments. For the color adjustments, I'm assuming you're adjusting the cut-off pots and not the drive. Also, does it make sense to white balance the way the WG manual has it before adjusting the contrast? Keep making those tech series!
Glad you liked it and found it helpful.
yes you primarily only adjust the 3 BIAS pots, if you need to adjust the 2 DRIVE pots you only need to do so to achieve a pure wight and yellow in the game or when using a TPG.
i have never used the manual to adjust the chassis as it is very convoluted and with my simple way you achieve the same results.
i plan to make more as time goes on and i get the equipment in and repaired to do them.
Hey Arcade Buffet, you are using the pincushion board on a 25” wells but you said you had to change part of the circuit I the board. Would you mind sharing what has to be done to use the pincushion on the 25”?
Thanks very much,
Adam
My 7500 has too much blue. I adjusted pots but no luck. Any ideas?
if adjustments are not doing what is expected, then either you have a tube problem, a wiring problem, or your chassis needs to be repaired as it has issues in the blue circuit.
if the actual game blue parts do not change when you turn the adjustment knobs and just the entire screen changes, i am guessing it is a chassis issue and you need to send it in for repair.
but if your chassis has never been serviced it needs to be before it fails or gets worse.
please visit my site and email me, thearcadebuffett.com
Good vid! But did you mean White balance? You spelled it 'Wight".
Spelling is NOT my strong suit, when i typed it in i did not get any squiggles under it sawing it was wrong.
@@buffett1978 No worries. I think Wight is another name for a ghost in D&D.
Feel free to kill my comment altogether. Just wanted you to see the correction. :-)