That is what I was trying to achieve, so thanks for that! In the original I had problems with the fluorescent lights reflecting off the white-board and was not very happy with the production. I think I need more vidoes, especially to discuss metric-Imperial conversion. I have developed a new equations for that.
Hi 👋 I am new to your channel, I have been looking for more info on Boxford , I have just been given a Boxford lathe, I have not picked it up yet, I have only seen it once, but I think it needs some work on it, as it has not been used for years, If it is possible to contact you in the new year for some help please, my other problem is that I live in France, and cannot find help over here, It looks like you have a great following, Regards Phil from the moulin France
Yes sure. I suppose you found my TH-cam channel about the Boxford Lathe: TH-cam.com/evan-e-cent/playlists should work. Contact me at AEDLewis at g mail . com
I have a 80 year old New Visbly lathe with a 4 TPI Leadscrew and includes a 127 tooth gear used on the leadscrew. The Lathe has a copper plate with metric threads, do you know if I can then use the indicator on the leadscrew and be able to disengage the half not while cutting threads?
No, if you are cutting metric threads on an imperial lathe (or imperial threads on a metric lathe), you cannot use the thread dial indicator (TDI) and it is not recommended to disengage the half-nuts from the leadscrew. Instead you either have to run the motor in reverse, or turn it backwards by hand. If you have a chuck that screws on you have to be careful to make sure it doesn't unscrew, especially if the motor is running in reverse. You cannot use the reversing lever in the gear train. This is used for cutting left hand threads. If you run RideTheGearTrain dot com and select a metric thread, you will see a help button called "Half Nuts". This is not referring to your sanity, but reading it may lead to insanity. I will place the link below. My TH-cam videos explain how to connect a reversing switch to a typical single phase motor, and another video explaining how variable speed motors work, and others about how I installed a variable speed DC motor in my Boxford lathe. Now, I love my variable speed, reversing motor, especially for cutting threads. I start a thread slow, speed up through the middle and gradually slow to a stop at the end of the thread, withdraw the tool and run fast in reverse to get back to the beginning of the thread ready for the next cut. It is even a good way to do imperial threads. The help file below gives more explanation and links to several useful videos. One even shows how you can disconnect the half-nuts if you strictly follow his technique. I hope you find all this helpful! ridethegeartrain.com/index.php?fnname=chooseThread%3EbeforeSubmit_notIndep_handleHidVar&adflag_f=yes&gearboxbrand=Imperial_no_gearbox&previouslathe=Imperial_no_gearbox&gearboxfitted_f=no&lathetype=imperial&threadtype=metric&threadsize=2&compoundincluded=1&autocompound_f=yes&errormax=1&maxresults=2000&changegearstring=16%2C24%2C36%2C40%2C56%2C56%2C60%2C100&changeleadscrew_f=no&leadscrew=8&powerfeed_f=no&carriagefeedratio=0.34&crossfeedratio=0.1&changeablestud_f=yes&studgear=40&changeablelsg_f=yes&leadscrewgear=56&range=single&lolim=4&hilim=8&interval=1&prefintro=yes&prefquickstart=yes&preftutorials=yes&prefourlinks=yes&prefinputtext=yes&prefspecstext=yes&prefgeartables=yes&prefgearboxtables=yes&stud=40&lsg=56&customdone_f=no&numn=1&numl=1&numgears=8&primaryratio=1&stdstudgear=40&stdleadscrewgear=56&stdleadscrew=8&stdcarriagefeedratio=0.34&stdcrossfeedratio=0.1&stdchangeablestud_f=yes&stdchangeablelsg_f=yes&stdgearboxfitted_f=no&stdcompincluded=1&stdauto_f=yes&stdchangegearstring=16%2C24%2C36%2C40%2C56%2C56%2C60%2C+100&stdcompoundgearstring=127%2F100&zout=yes&zin=yes°lab=no&ptab=no&pcurve=yes&psymb=no&pline=yes&pcircle=yes&fullsearch_f=no&restricted_f=no&mode=afterDataInput&pagename=chooseThread&helppage=chooseThread&helplabel=Half_Nuts&threadrequested=mm#Half_Nuts
Thank you Evan for the detailed reply. The plan is to eventually fit an Electronic Leadscrew, but for now I will ave to work with leaving the half nut engaged.@@Evan-e-cent
RideTheGearTrain has a button for people designing electronic leadscrews (ELS). Just some fairly basic calculations of gear ratios and pulse counting.@@XXXXIndices
Wonderful video! Thanks very much. It is clear and for the first time I now understand how the gear train works on my Boxford lathe.
Thank you! I wish TH-cam would give eit better promotion.
It has been a long time since I watched the 1st video, but I do believe this is easier to understand.
That is what I was trying to achieve, so thanks for that! In the original I had problems with the fluorescent lights reflecting off the white-board and was not very happy with the production. I think I need more vidoes, especially to discuss metric-Imperial conversion. I have developed a new equations for that.
@@Evan-e-cent Yes I would love to see Imperial to metric conversion videos!
Hi 👋 I am new to your channel, I have been looking for more info on Boxford , I have just been given a Boxford lathe, I have not picked it up yet, I have only seen it once, but I think it needs some work on it, as it has not been used for years,
If it is possible to contact you in the new year for some help please, my other problem is that I live in France, and cannot find help over here,
It looks like you have a great following, Regards Phil from the moulin France
Yes sure. I suppose you found my TH-cam channel about the Boxford Lathe: TH-cam.com/evan-e-cent/playlists should work. Contact me at AEDLewis at g mail . com
How's the new Boxford working out?
I have a 80 year old New Visbly lathe with a 4 TPI Leadscrew and includes a 127 tooth gear used on the leadscrew. The Lathe has a copper plate with metric threads, do you know if I can then use the indicator on the leadscrew and be able to disengage the half not while cutting threads?
No, if you are cutting metric threads on an imperial lathe (or imperial threads on a metric lathe), you cannot use the thread dial indicator (TDI) and it is not recommended to disengage the half-nuts from the leadscrew. Instead you either have to run the motor in reverse, or turn it backwards by hand. If you have a chuck that screws on you have to be careful to make sure it doesn't unscrew, especially if the motor is running in reverse. You cannot use the reversing lever in the gear train. This is used for cutting left hand threads.
If you run RideTheGearTrain dot com and select a metric thread, you will see a help button called "Half Nuts". This is not referring to your sanity, but reading it may lead to insanity. I will place the link below.
My TH-cam videos explain how to connect a reversing switch to a typical single phase motor, and another video explaining how variable speed motors work, and others about how I installed a variable speed DC motor in my Boxford lathe.
Now, I love my variable speed, reversing motor, especially for cutting threads. I start a thread slow, speed up through the middle and gradually slow to a stop at the end of the thread, withdraw the tool and run fast in reverse to get back to the beginning of the thread ready for the next cut. It is even a good way to do imperial threads.
The help file below gives more explanation and links to several useful videos. One even shows how you can disconnect the half-nuts if you strictly follow his technique.
I hope you find all this helpful!
ridethegeartrain.com/index.php?fnname=chooseThread%3EbeforeSubmit_notIndep_handleHidVar&adflag_f=yes&gearboxbrand=Imperial_no_gearbox&previouslathe=Imperial_no_gearbox&gearboxfitted_f=no&lathetype=imperial&threadtype=metric&threadsize=2&compoundincluded=1&autocompound_f=yes&errormax=1&maxresults=2000&changegearstring=16%2C24%2C36%2C40%2C56%2C56%2C60%2C100&changeleadscrew_f=no&leadscrew=8&powerfeed_f=no&carriagefeedratio=0.34&crossfeedratio=0.1&changeablestud_f=yes&studgear=40&changeablelsg_f=yes&leadscrewgear=56&range=single&lolim=4&hilim=8&interval=1&prefintro=yes&prefquickstart=yes&preftutorials=yes&prefourlinks=yes&prefinputtext=yes&prefspecstext=yes&prefgeartables=yes&prefgearboxtables=yes&stud=40&lsg=56&customdone_f=no&numn=1&numl=1&numgears=8&primaryratio=1&stdstudgear=40&stdleadscrewgear=56&stdleadscrew=8&stdcarriagefeedratio=0.34&stdcrossfeedratio=0.1&stdchangeablestud_f=yes&stdchangeablelsg_f=yes&stdgearboxfitted_f=no&stdcompincluded=1&stdauto_f=yes&stdchangegearstring=16%2C24%2C36%2C40%2C56%2C56%2C60%2C+100&stdcompoundgearstring=127%2F100&zout=yes&zin=yes°lab=no&ptab=no&pcurve=yes&psymb=no&pline=yes&pcircle=yes&fullsearch_f=no&restricted_f=no&mode=afterDataInput&pagename=chooseThread&helppage=chooseThread&helplabel=Half_Nuts&threadrequested=mm#Half_Nuts
Thank you Evan for the detailed reply. The plan is to eventually fit an Electronic Leadscrew, but for now I will ave to work with leaving the half nut engaged.@@Evan-e-cent
RideTheGearTrain has a button for people designing electronic leadscrews (ELS). Just some fairly basic calculations of gear ratios and pulse counting.@@XXXXIndices