ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2020
- DISCLAIMER:
Nothing contained in this video or shall be construed to over-ride or replace the relevant standards or manufacturer’s recommendations, manuals, data or product specific training. The contents are believed to be correct to the best of my knowledge and are offered in good faith. No warranty is expressed or implied. The author accept no liability for any loss, damage, injury or death resulting from information contained in this video. It is the responsibility of the viewer to verify the correctness of the information. Author strongly recommends to service scuba gear at authorized repair facility.
Update September 20, 2022: Deep Six Gear issued new updated version of Regulator Service Manual. New version is more detailed. On page 37 step 14 and 15 describe how to remove plug and replace O-rings in the adjustment knob of the Second Stage. I did not cover it in my video, not a critical step, but since it is now in the manual, please consider to follow.
Please find manual here: www.deep6gear.com/service-man... - แนวปฏิบัติและการใช้ชีวิต
This is the best presentation have seen , I wouldn't change a thing, Thank you very much for taking the time to explain every step.
Glad you found it useful. Thank you for watching.
These videos have been great and have made me happy to pay what I do to have my equipment served
Thank you for watching!
very good video and great instruction. I will be watching it again as there is a lot to take in. Thanks and Kudos from Vancouver Island
Thank you for watching!
I will be diving in Nanaimo and Quadra Island in July :)
Thank you so much! Your videos are the best! I appreciate your work!
Thank you for watching!
Great video!
thank you!
Thanks for making this video. I have the same regulators but I have not tried to service them yet. Both of mine have high intermediate pressure and they need servicing. Your video will come in handy.
Thank you for watching! Is you IP stable high or creeping up?
@@maxdiver9038 Its creeping up after about a minute, one is creeping to 200 psi the other to 300 psi. They are a year old and have about 60 - 70 dives on them.
I have ordered new ones so I can still dive. I will order the service kits and service them while I take a class on servicing regs. Since I do not have all the tools yet.
@@floridaadventurediving144 Yes it needs service, not safe
Deep6 also will do service for you for free
Very informative. Very helpful.
Thank you for watching!
Wonderful content bro this gonna help me
Thank you for watching. Glad you found it useful!
u r an amazing man good work
Thank you for watching!
I hope that BC servicing comes out from you soon :)
I hope so too, need to find time and get different BCs to demonstrate.
I think chapters on the video could be useful for finding different parts of disassembling the regulator
Good point, thank you for watching.
Improper use of the spanner wrench...both hands should be used, with one turning the handle and the thumb of the other hand pressed down on the pin keeping it in place and not slipping out and possibly marring the regulator finish (as happened multiple times in this video). Also, disassembly sequence is incorrect - the DIN valve housing and saddle should have been removed after the environmental cap was removed.
Thank you for watching. Thank you for pointing on my spanner wrench technique. The sequence of the first stage disassembly taken from the Deep 6 regulator manual, I did remove environmental cap and diaphragm first and then did the din valve assembly, not sure where have you seen opposite.
Excuse me, I also want to learn to maintain apkes by myself. What are the specific tools you use? Is it convenient to give me pictures
Thank you for watching. Yes absolutely I can share pictures. The main tool you need a handle www.divegearexpress.com/first-stage-body-holding-tool. Also inline adjustment tool good to have www.divegearexpress.com/second-stage-in-line-adjusting-tool-w-ip-gauge. Brass picks www.divegearexpress.com/three-piece-brass-o-ring-pick-set. You will need spanner wrench www.divegearexpress.com/xs-spanner-wrench-round-surface. IP pressure gauge www.divegearexpress.com/compact-ip-gauge-psi-and-bar. Set of metric align hex keys www.amazon.ca/Wrench-Premium-Metric-0-028-3-inches/dp/B09JVNVTR8/ref=sr_1_2?crid=27JM2M7QFRTOK&keywords=metric+allen+key+set&qid=1679412831&sprefix=metric+all%2Caps%2C112&sr=8-2. If you have XTX second stage you might want to buy cover opener scuba-clinic-tools.com/products/apeks-cover-tool-xtx-series. Torque wrench 20-250 in-lbs a good investment. Bench vise www.amazon.ca/Dual-Purpose-Combined-Universal-Adjustment-Woodworking/dp/B095SN9C5Y/ref=sr_1_2_sspa?crid=31REDBYSRFKUH&keywords=bench+vise&qid=1679413153&sprefix=bech+vise%2Caps%2C97&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE3VFZSUVVJTzFXUTcmZW5jcnlwdGVkSWQ9QTAyNDI0MjMxNlU5RzU0RlU2RzgwJmVuY3J5cHRlZEFkSWQ9QTAzNzYyNjEyM1U5V0gzQVlHSzQ2JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==.
Here you can find service manual for DST first stage, I am not sure which one you have: allthingsdiving.com/download/apeks-dst-ust-first-stage-regulator-maintenance-manual-2005-en/
Service manual for XTX second stages: www.manualslib.com/manual/1388624/Apeks-Xtx200.html#manual
Hi Max. Quick question, I got some scratch on this. Does it possible to assemble it and repaint it?
Thank you for watching. It is plated metal, you could not really painted it well. I would not worry about scratches it is not going to rust.
@@maxdiver9038 Thanks Max! It's just a bit scratches!
Do you have the manual to service apeks tek3 ?
Thank you for watching! Yes you can download manual here allthingsdiving.com/download/apeks-ds-us-tek3-extrair-first-stage-regulator-maintenance-manual-2006-en/