What kit is this? The Mazda interior lights stock are garbage and I need new ones for Ridesharing. But I don’t want them to be blasting peoples eyes out. I’ve always gotten Sylvania bulbs for all my cars for inside. Ddm for outside but the Mazda doesn’t need led exterior bulbs. What’s the benefit of your brand vs Sylvania?
I did this on my cx5 and the interior lights were lit as fuck compared to the stock lights but 6 months later the new lights died prematurely. I used gloves when installing so I didbt put some oil in it. Basically its just aliexpress lights. So basically im back to my old dumb lights again. (Put back old lights again)
okay so I've now damaged my mazda RBCM module which is $$$ to replace. Please put a note in your video to say either disconnect the negative terminal of the battery when changing bulbs or disconnect the light using the connector before installing the LED in the boot / cargo area.
Thanks for this informational video. Is it the same way to remove the license plate cover on Mazda CX-5 KF? The video on the process to remove the cover seems simple but I tried on my KF and it didn’t really work 😅
Is it possible to change lights for the switches (ie. for power liftgate, i-stop, OFF, TCS Off, Parking Sensor)? If so, what lights do they use? I find them quite dark when lights are on. TY PS. While at it, would be nice too to be able to change the lights on the door panels (ie. power windows).
When replacing the bulb in the rear map.. the clamp came off and where it was attached it pushed up. I can't get to the piece that pushed up without pulling it down with a pliers but it when letting go, it pops back so you cannot get to it. Does anyone know how to pull out the whole box so that this can be fixed?
be very careful replacing your lights in your mirrors.. i did this, and my passenger said the mirror was now useless. as she was blinded from being able to see herself.
I bought the license plate bulb from you a couple of years ago but I noticed that it on the left side it is starting to blink. Does that mean is getting worn out or could it be that it is just loose? Thanks!
I'm having a problem installing the tailgate light on my CX 5 2016. There's no way that I can remove that cover without breaking the pegs that hold it in place. The force I would have to apply to remove the cover is way more than what I saw in the video. Any suggestions?
I am also running into this problem. Can you explain how you made the cover pop off without breaking? It feels like the plastic cover is separate from the switch but the video shows they are all 1 piece.
@@FlyersPh9 The trunk light in that video is not like the luggage area light in my 2019 CX-5. I wonder if that's a different vehicle. Maybe they couldn't get the lens off either. I know I can't.
Michael Artis would you consider doing a video for 2019/2020 trunk light replacement? The whole unit pops out, dangling by its main wires and the clear cover does not look as easy to get off as others in car interior were.
FOR ALL OF YOU WHO ARE DOING THIS TO A 2020 CX5 the LICENSE PLATES LIGHTS ARE ALREADY LED don’t force try to force it. The COVER is NOT meant to come off you will just ruin the light cover and possibly the paint.
Thank you for reaching out. Yes, the installation process for the 2022 is virtually identical to as shown in the video. Also, the LED kit linked in the description is compatible as well.
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
hi, i got problem while unplug the lamp from license plate number. do you or anyone have suggestion how to unplug it? it's really difficult and take me 4 days 4 times to try it out.
Good day! We have a 2014 Mazda CX5. May I know how much it would cost me for all the lights installed in this video and does it come with the tools that you use? Thanks a lot! 😊
Does anyone know if the bulb sizes and types stayed the same with the facelift for 2017? Can't find any information anywhere on replacement bulbs for the 2017. :/
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our lifetime warranty.
You are very welcome, thank you for tuning in! You can purchase all of the bulbs directly on our website. Here are the links for your convenience: Standard: goo.gl/jpoypF Premium: goo.gl/GwkuRJ
Unfortunately, we do not have an install video for your vehicle just yet, as we have not yet gotten our hands on one out here in Los Angeles, CA. However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed. I have linked our How-to Page below for your convenience. www.precisionled.com/how-to-videos.html
@@PrecisionLED I see, 'cause when I watched the 'How to install...' vid, it showed the older/2013? CX5, so thought the currect CX5 may be different. Tnx
Thank you for your interest. You can view the headlight / fog lights installation here: www.precisionled.com/how-to-videos/mazda/mazda-cx-5-headlight-2013-2016.html The relay harness is not required when installing our LED products, as we only sell high quality Canbus LEDs.
For your Mazda 6, you would want to install this kit: www.precisionled.com/mazda-6-premium-led-interior-package-2014-present.html However, the installation process would be very similar to what is shown in the video.
So the 2018 doesn't let you get to the reverse lights like that. There's no panel. Are you about to find out how and where for that model? I just bought all your lights and want to install those. They are great by the way.
We will try and get our hands on a 2018 CX-5 for an updated video. However, it is likely you can access the reverse lights by removing some of the back paneling. If you are still having issues, feel free to email us at help@precisionled.com with some photos and we will try to help further.
Thank you for your interest. We will keep an eye out for a 2016 Mazda 2 Maxx Sedan out here in Los Angeles, CA for an installation video. However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed. I have linked our How-to Page below for your convenience. www.precisionled.com/how-to-videos.html
Well said instructions and nice video. I did mine following exactly of what you said, had no problem installing the lights.
Glad to hear! Thanks for the positive feedback.
Thank you. Just replaced all my bulbs you're the best!
So happy to hear that! 😊
Good video!! Made me feel like I could do it myself!! Thanks!!
Yes... You can do it!
@@PrecisionLED I DID end up doing it and it was as easy as you made it seem! Thanks again!!
Great video, used this for my 2023 cx5
Bought these and it doesnt work for the 2021 cx5, the reverse and license plate bulbs are not the same as in this video. How do we upgrade?
Do you also have ligths for 2021 Honda Ridgeline? Thanks!
What kit is this? The Mazda interior lights stock are garbage and I need new ones for Ridesharing. But I don’t want them to be blasting peoples eyes out. I’ve always gotten Sylvania bulbs for all my cars for inside. Ddm for outside but the Mazda doesn’t need led exterior bulbs. What’s the benefit of your brand vs Sylvania?
Just installed in my cx5. Looks good. Will order the reverse and lic plate later.
Glad to hear, thanks so much for tuning in. Let us know if you have any questions in the future!
If you add the LEDs on the license plate will that give you a better quality image on your back up camera at night??
omg would that be cool
I did this on my cx5 and the interior lights were lit as fuck compared to the stock lights but 6 months later the new lights died prematurely. I used gloves when installing so I didbt put some oil in it. Basically its just aliexpress lights. So basically im back to my old dumb lights again. (Put back old lights again)
Is this the same process for a 2021 Mazda CX-5?
okay so I've now damaged my mazda RBCM module which is $$$ to replace. Please put a note in your video to say either disconnect the negative terminal of the battery when changing bulbs or disconnect the light using the connector before installing the LED in the boot / cargo area.
Hello! Do anyone know the type of the light for truck and for windshield sun protection ones? Thank you in advance!
Thanks for this informational video. Is it the same way to remove the license plate cover on Mazda CX-5 KF? The video on the process to remove the cover seems simple but I tried on my KF and it didn’t really work 😅
Reference 10:30 of the video below for the CX-5 license plate installation.
th-cam.com/video/T5iKBsisfBs/w-d-xo.html&ab_channel=PrecisionLED
Thank you very much for the detailed explanation.
Thanks for tuning in!
Is it possible to change lights for the switches (ie. for power liftgate, i-stop, OFF, TCS Off, Parking Sensor)? If so, what lights do they use? I find them quite dark when lights are on. TY
PS. While at it, would be nice too to be able to change the lights on the door panels (ie. power windows).
Old, but you should have a dial on your dashboard display by the speedometer. Turn the dial when your lights and it should brighten it up
When replacing the bulb in the rear map.. the clamp came off and where it was attached it pushed up. I can't get to the piece that pushed up without pulling it down with a pliers but it when letting go, it pops back so you cannot get to it. Does anyone know how to pull out the whole box so that this can be fixed?
be very careful replacing your lights in your mirrors.. i did this, and my passenger said the mirror was now useless. as she was blinded from being able to see herself.
I bought the license plate bulb from you a couple of years ago but I noticed that it on the left side it is starting to blink. Does that mean is getting worn out or could it be that it is just loose? Thanks!
If it’s blinking that means it needs to be replaced.
Will the fade on and fade off feature still work with these? Thank you for the install vid! These are 3030s correct?
Hi! Yes, our LEDs are designed to fade on/off just as your halogens do. The majority of the interior uses a 29mm festoon type bulb (3022).
I'm having a problem installing the tailgate light on my CX 5 2016. There's no way that I can remove that cover without breaking the pegs that hold it in place. The force I would have to apply to remove the cover is way more than what I saw in the video. Any suggestions?
Michael Artis did you ever figure this out? I am running into the same problem.
I had to view the diagram in the owners manual...it did pop off and not break.
I am also running into this problem. Can you explain how you made the cover pop off without breaking? It feels like the plastic cover is separate from the switch but the video shows they are all 1 piece.
@@FlyersPh9 The trunk light in that video is not like the luggage area light in my 2019 CX-5. I wonder if that's a different vehicle. Maybe they couldn't get the lens off either. I know I can't.
Michael Artis would you consider doing a video for 2019/2020 trunk light replacement? The whole unit pops out, dangling by its main wires and the clear cover does not look as easy to get off as others in car interior were.
Gracias por la explicación... Buen video!
Mi 2014 Mazda cx-5 se ve muy bien.
Glad to hear, thank you so much for tuning in!
Beastly vid.. Very helpful.
Thanks for your support!
Great video
Hmmm... maybe I'll get this kit for my 2019 GT Reserve but footlights only - maybe.
Sounds great! We hope it went smoothly!
FOR ALL OF YOU WHO ARE DOING THIS TO A 2020 CX5 the LICENSE PLATES LIGHTS ARE ALREADY LED don’t force try to force it. The COVER is NOT meant to come off you will just ruin the light cover and possibly the paint.
is it 31mm?
Hi there, does it work with the 2022 CX-5?
Thank you for reaching out. Yes, the installation process for the 2022 is virtually identical to as shown in the video. Also, the LED kit linked in the description is compatible as well.
Do you have a new kit for the 2017 - 2021 Gen 2 Mazda CX5?
Hi! The kit linked in the description box is compatible with your newer model.
Not to 2017 and up models
Things changed in quite a few places
good video, before when I opened the back door the light on and now I have to do it with my hand
Thanks for watching!
Whats the difference from standard and premium package?
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
hi, i got problem while unplug the lamp from license plate number. do you or anyone have suggestion how to unplug it? it's really difficult and take me 4 days 4 times to try it out.
Check out 11:06 in the video, you have to pinch down and pull the bulb out with your fingers.
Good day! We have a 2014 Mazda CX5. May I know how much it would cost me for all the lights installed in this video and does it come with the tools that you use? Thanks a lot! 😊
Hi! Check out the links in the description box below the video for all pricing details. The tool kit is complimentary if you purchase one of our kits!
Very nice thank
Does anyone know if the bulb sizes and types stayed the same with the facelift for 2017? Can't find any information anywhere on replacement bulbs for the 2017. :/
I believe so. I installed LED Bulbs in my 2017 Mazda CX-5.
yes they do
however, the license plate bulbs did not work - too tall to be able to put the plastic cap back on. I too have a 2017...
@@kricin too tall ?? 😲
Yes, it would be the same installation process as shown in the video.
The lights that you installed on this video are they the 6000k or the 8000k LED's?
The lights installed on this vehicle is the 6000K color temperature.
Thank you for this video helps a lot
Glad to help!
Hey guys, just to check. Are these compatible with the new 2019 version?
Thank you for your interest. Yes, the kits linked in the description are compatible with your 2019 model.
The tools u used to remove the cover, where to get that? Any link?
Here is a direct link to our trim tool kit: www.precisionled.com/professional-trim-tool-set-3.html
If you upgrading your lights in your car, go with Precision LED
Brightens my interior. I am ordering tnr
You rock, thanks for the referral! Hope your LED upgrade went smoothly!
Please let us know some of the differences between the standard vs. Premium package. Thx.
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our lifetime warranty.
Love this...Thank you! I have a 2018 Cx5. So, what bulb should I buy and where do I buy it?
You are very welcome, thank you for tuning in! You can purchase all of the bulbs directly on our website. Here are the links for your convenience:
Standard: goo.gl/jpoypF
Premium: goo.gl/GwkuRJ
anything for the 2014 CX-9?
Unfortunately, we do not have an install video for your vehicle just yet, as we have not yet gotten our hands on one out here in Los Angeles, CA. However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed. I have linked our How-to Page below for your convenience.
www.precisionled.com/how-to-videos.html
Are all these compatible with the facelift 2017 model?
yes they work.
Yes, they are indeed compatible!
Thank you
None for the later models of CX-5?
Hi! The installation process shown in this video and the kit linked in the description box are also compatible with the later models of CX-5.
@@PrecisionLED I see, 'cause when I watched the 'How to install...' vid, it showed the older/2013? CX5, so thought the currect CX5 may be different. Tnx
Great video! Thanks!
Thanks for watching!
Does it work with a cx5 2012?
Yes! The installation process would be very similar to as shown in the video. The package listed in the description would also be compatible!
@@PrecisionLED thank you and greetings from Germany
Do you have a video showing how to install an hid/led foglight kit for a 2016 cx-5 with a power relay harness?
Thank you for your interest. You can view the headlight / fog lights installation here: www.precisionled.com/how-to-videos/mazda/mazda-cx-5-headlight-2013-2016.html
The relay harness is not required when installing our LED products, as we only sell high quality Canbus LEDs.
thx!!❤❤👍🏽
Excelente para mejorar la iluminacion pero aqui en mexico modificas lo de serie pierdes garantia de inmediato
That is unfortunate. 🙁
Are these compatible with 2018 Mazda 6?
For your Mazda 6, you would want to install this kit:
www.precisionled.com/mazda-6-premium-led-interior-package-2014-present.html
However, the installation process would be very similar to what is shown in the video.
Very cool. Are they dimmable?
Yes, our LEDs are dimmable, and they would act exactly as your halogen bulbs do.
I got the premium led package for my Mazda cx5 2016 ... 👍
Good job, but what does that mean?
Thank you so much for choosing PrecisionLED!
So the 2018 doesn't let you get to the reverse lights like that. There's no panel. Are you about to find out how and where for that model? I just bought all your lights and want to install those. They are great by the way.
We will try and get our hands on a 2018 CX-5 for an updated video. However, it is likely you can access the reverse lights by removing some of the back paneling. If you are still having issues, feel free to email us at help@precisionled.com with some photos and we will try to help further.
kricin They worked perfectly for me on a 2018
Wyatt King well, that's promising. Maybe they sent me the wrong set. Waiting for support to become available and advise. Thank you!
THANK YOU! fantastic explication! and great products! thank you!
Thank you for the kind words!!
Hey can you please do one for 2016 mazda 2 maxx sedan
Thank you for your interest. We will keep an eye out for a 2016 Mazda 2 Maxx Sedan out here in Los Angeles, CA for an installation video.
However, the installation process is virtually the same for all vehicles. The halogen bulbs are very easy to access with our trim took kit, which comes complimentary with all of our interior LED packages. I would recommend having a watch on some of our other DIY videos, and you will gain a general knowledge of how LEDs are installed. I have linked our How-to Page below for your convenience.
www.precisionled.com/how-to-videos.html
sandeep narayan can you do one on a Mazda 2012 to install the interior light assembly aka dome light.
Se ve espectacular en la noche
We agree! 😃
谢谢！
You are very welcome!
Hi 2020 year
The installation process for the 2020 is identical to as shown in the video, and the product linked in the description is compatible as well.