Hub Bub Pedal Unboxing & OBEL Demo | Jerry Rig

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024

ความคิดเห็น • 42

  • @lukepascot
    @lukepascot 2 ปีที่แล้ว

    When you were playing through that screamer, that chromatic walk down was just… *chef kiss*

  • @georgestevens1502
    @georgestevens1502 ปีที่แล้ว +1

    Excellent demo. Usually I don't like talking in demos, but you're explanations are clear and simple and tied directly to just what you played on each pedal. However, I still haven't found anyone who has jailed Jerry's bottom end. It was a deep, clear, articulate tone with just a touch of grit that I've never heard from anyone else which stood out when he was adding single bass notes especially in walk downs or walk ups. Especially in the 72-73 period. Be nice to have a video just on that part of his bass tones.

  • @chrislaing7108
    @chrislaing7108 3 ปีที่แล้ว +3

    Excellent Health & Safety tips from Davvy. Perhaps that should be a new feature of Drink & A Joint.

  • @IceeDivision
    @IceeDivision 2 ปีที่แล้ว +2

    The pedalboard is glorious. My first good look at a setup! Thank you!

  • @NedMorse
    @NedMorse 3 ปีที่แล้ว +4

    A junction box like the hubbub is the way to go for sure - without it you end up with a mono cable going straight to your amp while your stereo cable goes to your pedalboard and you can't move! Plus then you need a custom cable that splits the stereo cable to two mono plugs for the send and return on your pedalboard. Better to use a standard stereo cable that if you need to replace you can get anywhere.

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว

      This guy gets it!

    • @nedrobinson7490
      @nedrobinson7490 ปีที่แล้ว

      Right? Seen people have these $300 custom-made Y cables done, and I’m always just like “why not just buy the breakout box and use regular cables?” It’s just a more elegant solution. And less expensive. And if your Y gets damaged, it’s just so much easier to replace a standard stereo cable. Different strokes fersure 🤷‍♂️

  • @markkindermannart4028
    @markkindermannart4028 2 หลายเดือนก่อน

    Hey, nice setup and happy to see my board is similar.... I'm still confused, even though I listened to the music play! Why is it different to run the loop through the guitar and not just a normal setup if you still have to stomp on the boxes anyway?

  • @charlesgrandt9012
    @charlesgrandt9012 3 ปีที่แล้ว +1

    Nice! I noticed you changed the positions of the Boost & QTron in your chain from an older Jerry Rig video. I'm picking up a QTron soon & trying to figure out where to run it with respect to OD, Delay, & Reverb. What do you think?
    Would be way cool if you made another gear video showing how you set-up and use the modulation type effects like QTron & Octave pedals on certain songs in your sets! Always appreciate you sharing your skills & insights with us less seasoned jammers!

    • @ryanriley746
      @ryanriley746 2 ปีที่แล้ว +1

      hi, i notice this is an old question, but I tend to find OD can work before or after Q tron, but I like it better before. Delay and reverb tend to work better at the end of the chain after the Q tron. Additionally, if you have the Q tron+, you can run an octave pedal in the effects loop of the Qtron+! That sounds awesome! Cheers

  • @kenny3485
    @kenny3485 ปีที่แล้ว

    Thank you!

  • @wolfpac1970
    @wolfpac1970 3 ปีที่แล้ว

    Groovy....Hopefully I'll have the cash to order either Hub Bub pedal and cable when I get the shipping notice for my Dead Bolt from Phred. Now, I need to check my Facebook and see if Freddie has posted this video on the Phred page.

  • @budgibson185
    @budgibson185 3 ปีที่แล้ว

    Live my mini spark- best pure clean boost pedal out!!! Also the ditto is perfecto

  • @adirondacktrekking1972
    @adirondacktrekking1972 3 ปีที่แล้ว

    Holy sh*t man ,I need to catch up ...pretty overwhelming stuff ,but your making it easier to understand bud ✨🙏✨

  • @chefspencer7258
    @chefspencer7258 ปีที่แล้ว

    how do you route your pedal board with your GR20?

  • @goodwi11
    @goodwi11 3 ปีที่แล้ว

    Did you have to alter the wiring in the obel jack for this to work with your Phred? I think you have to with the older models

  • @jessek.beauchamp1356
    @jessek.beauchamp1356 3 ปีที่แล้ว +1

    Where did you get the volume knob mod done on the Qtron. I have a + and it's so loud I can't even use it. On floor not on board. Of all the overdrives, come on bro spend some cash. I think Analog Man mods those. Way better distortion out there. The Waza MT2 is better yo.

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว

      Got the mod done by my tech Aaron Shepard. Very simple mod. Took him like half an hour. And I like the DS-1, if it was good enough for Jerry, it’s good enough for me, but by all means, send me the cash for whatever one you want me to get and I’ll get it.

    • @jessek.beauchamp1356
      @jessek.beauchamp1356 3 ปีที่แล้ว +1

      Wanna email me the Mod and where it goes in the circuit Bro? Mines not the micro. Thanks.

  • @KCroc1
    @KCroc1 3 ปีที่แล้ว

    Will this work with just a strat or do I absolutely need a OBEL

  • @jessek.beauchamp1356
    @jessek.beauchamp1356 3 ปีที่แล้ว

    Hey Hub Bub. Can you mod that with a expression pedal control fx/dry volume and expression Jack in the hub bub? Pass it on please Davvy.
    J.

    • @jessek.beauchamp1356
      @jessek.beauchamp1356 3 ปีที่แล้ว

      th-cam.com/video/6ZkX_LfiKN0/w-d-xo.html
      And this is why I need one of the fx/wet/dry Hub Bub and the preamp guts. Or the fx knob on the guitar with the preamp. Ibanez AM93, no Phred.

  • @2000jpangburn
    @2000jpangburn 3 ปีที่แล้ว

    Wouldn’t putting your volume pedal at the end of the signal chain accomplish the same thing? Or do you have that in the front for some other reason?

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว +1

      I use it for whale sounds.

    • @2000jpangburn
      @2000jpangburn 3 ปีที่แล้ว

      Interesting. The OBEL is great for the Deadhead Gear head.

  • @jimslawnikowski1861
    @jimslawnikowski1861 3 ปีที่แล้ว

    What amp are you using now?

    • @samuel71deboer
      @samuel71deboer 3 ปีที่แล้ว +2

      I believe he's using a mesa blue angel dual rectifier

  • @Homer7921
    @Homer7921 3 ปีที่แล้ว

    Can you put an onboard fix loop into any guitar?

    • @peteseitz6332
      @peteseitz6332 3 ปีที่แล้ว +1

      Yes

    • @NedMorse
      @NedMorse 3 ปีที่แล้ว +1

      Most likely you are using standard 1/4" phone jacks/plugs, so you'll need two jacks in the guitar to plug your cables into. Jerry style guitars are the only ones out there built this way, so for all other guitars you will need to modify your guitar to create a port (space) for a second jack (how hard this is depends on the guitar). You will need a buffer installed in the guitar (you get horrible crosstalk squealing without one) and it most likely will need a 9v battery so you will need the space for those.

  • @janitoreighteen745
    @janitoreighteen745 3 ปีที่แล้ว

    I don’t know why, but every time your foot came flying into the scene it startled me.

  • @goodwi11
    @goodwi11 3 ปีที่แล้ว

    Absolutely ALWAYS cut towards you, kids.

  • @jimslawnikowski1861
    @jimslawnikowski1861 3 ปีที่แล้ว

    I see now, you just removed the mesa from the combo cab.

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว

      Yeah, I’m actually using my nomad 55 head. That’s the one that’s on top.

  • @FL1PDAN
    @FL1PDAN 3 ปีที่แล้ว +1

    The term is bandied about but you're definitely a living meme

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว +2

      Then my life is complete

  • @sirbergersworth
    @sirbergersworth 3 ปีที่แล้ว

    Nice video. Time to lose the volume pedal. Lol

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว +1

      But. I like to make whale noises.....

    • @sirbergersworth
      @sirbergersworth 3 ปีที่แล้ว +1

      That’s what your guitar volume knobby is for. lol. Unless it’s too far away which isn’t any fun.

    • @sirbergersworth
      @sirbergersworth 3 ปีที่แล้ว

      I don’t use an OBEL but I keep a volume pedal at the end of my chain of boxes to somewhat simulate it.

    • @TobyDavvy
      @TobyDavvy  3 ปีที่แล้ว

      But, my hands gotta do stuff.....ima keep it. Do you have plans to get one put in?

  • @alexandergriggs9934
    @alexandergriggs9934 2 ปีที่แล้ว

    Dirt before mutron?