there was a self balancing two-wheeled car called Gyro-X in 1967, maybe you've seen it? it had a retractable "landing gear" kinda like a plane, thing's whack
How about a workshop Olympics episode where you each find a single vehicle for a one of however many events. The variant is that all of you use the vehicle chosen for that event. Everyone using the same vehicle makes it more about skill and adapting to new vehicles in each round.
The gyro mug is pretty accurate, you know there's this thing being sold - a platform for a cup that leans heavily as you go and even rocks, but this motion is exactly why the liquid doesn't spill out. It would work if not for suspension glitches in SM.
Multiplayer monday idea, glowbug hoover "race". Who can remove the most cardboard in set time, who can remove cardboard in the tightest of spaces and maybe who can hoover upside down. Could be a fun video to watch and to record
The suspension bow thing will work "better" if you built it the other way around and pulled on the suspensions to extend them, and then release to let them go back. That's a glitch, yeah...
GG. The truck has too much thrust. When a sensor turns on the thrusters, they push too hard and lean it over the other way. The thrust needs to be lessen to push it upright but not over to the other side.
@ShawnHCorey that's some nice fancy words, but the thrust isn't fighting against a constant force. Gravity is always pulling straight down. The car's angle is constantly changing. The amount of thrust that is directly opposing gravity changes during its trajectory. It's not constant. Near the top, very little gravity is actually tipping the car. But most of your thrust is pushing against that small fraction of gravity affecting the car. You'd want very little thrust here to overcome it. Near the bottom, almost all of gravity is tipping the car. So your thruster needs to have a lot more force to overcome it. All this to say, this setup doesn't work and will never work with a constant amount of thrust. Yours truly, an engineer.
![You DRAW IT, I BUILD IT! Train Catapult, Sawtooth Scissors, and More! [YDIB 23]](http://i.ytimg.com/vi/K0NJadj0PKE/mqdefault.jpg)
![You DRAW IT, I BUILD IT! Train Catapult, Sawtooth Scissors, and More! [YDIB 23]](/img/tr.png)
![You DRAW IT, I BUILD IT! Unusual Suspension, Perpetual Motion, and More! [YDIB 22]](http://i.ytimg.com/vi/O0ZsulqPViM/mqdefault.jpg)
13:30 you can mount the steering fork to the body with 2 bearings to center the tire on an even width build :)
This is exactly what I wanted to comment right now.
He could also just use small wheels. They are 1 block wide.
The editor is such a nice guy, they even put warning for photosensitive people
YDIB is one of my favorite series, now I get a new one on thanksgiving!
Great video, and also want to give a special call out to the editing, I appreciate the extra work that's been put in lately!
6:50 biblically accurate suspension mug
Hey @Scrapman! Do you know that there is a new DLC for Teardown? If so, PLEASE PLAY IT, YOUR AMAZING!!
Please turn this into a weekly series together with the weird mechanisms & vehicles videos
Could you do something like increaseing the tick rate so that the glowbugs vacuum faster
Not in scrap mechanic
there was a self balancing two-wheeled car called Gyro-X in 1967, maybe you've seen it? it had a retractable "landing gear" kinda like a plane, thing's whack
That two wheeled car gave me some serious déjà vu
How about a workshop Olympics episode where you each find a single vehicle for a one of however many events. The variant is that all of you use the vehicle chosen for that event. Everyone using the same vehicle makes it more about skill and adapting to new vehicles in each round.
I really liked the suspension lounching mechanism. I think if you a would add more layers to it, it would flex more and shoot further!
Thanks you for the two wheels car
Great video.
Did it meet your expectations
@@quakxy_dukx perfecly
you can center the steering over two blocks by putting two bearings next to each other with steering and blocks on each welded to each other
The gyro mug is pretty accurate, you know there's this thing being sold - a platform for a cup that leans heavily as you go and even rocks, but this motion is exactly why the liquid doesn't spill out.
It would work if not for suspension glitches in SM.
The gyro mug is really neat too, but suspension glitches ruin a lot in SM i've found
Unless it goes upside down for a bit too long and the cup and the liquid falls out…
@@minheepark4896 I actually saw them spinning the cup upside down and it didn't spill, of course if you stop upside down then it will spill.
One of the best videos of the channel
I would love to see more workshop hunters
I want to see the suspension bow explored more. Maybe an mm challenge? 👀
HES DOING IT AGAIN! I love this guy!
Multiplayer monday idea, glowbug hoover "race". Who can remove the most cardboard in set time, who can remove cardboard in the tightest of spaces and maybe who can hoover upside down. Could be a fun video to watch and to record
16:05 you can angle the thrusters to fix the problem
editing is amazing
Evolution race: Spaceships
Lately the editing has been really good, hope they're being paid well!
wow he finally came back with ydib
Cheese hoover is one of my best mates, good job on the hoover haha
For the gyro you should have replaced the horizontal suspensions with reg blocks so it doesn't act funky
12:28 funny thing is I’ve made something like this before but I did it with horns that were constantly honking
Finally!!!!! I'v been waiting for next YDIB for like 2 months
14:36 spiff would be proud
12:30 The Reliant Robin, made worse by the French. xD
gyromug problem was partially because the circle wasnt welded together so it was more than likely fighting all the suspension
HES BACK TO YDIBS
7:10 yea in a trailmakers video you have made a crossbow with I believe a similar concept
The two wheels car, def a Citroen engineer watching SM YDIB....
no way it's back
The suspension bow thing will work "better" if you built it the other way around and pulled on the suspensions to extend them, and then release to let them go back.
That's a glitch, yeah...
I appreciate the photosensitivity warnings! The editor has been doing a lot of great work recently!
6:33 the way it just started to rapidly accelerate and ascend 😭🙏
Trailmakers video idea: Can you break the sound barrier with only miniguns?
GG. The truck has too much thrust. When a sensor turns on the thrusters, they push too hard and lean it over the other way. The thrust needs to be lessen to push it upright but not over to the other side.
You'd need the thruster to increase in power the more you tilt. It's literally impossible with the setup in the drawing.
@@Doomblud What is happening is called forced damped simple harmonic motion. To stop it oscillating, increase the dampening or decrease the power.
@ShawnHCorey that's some nice fancy words, but the thrust isn't fighting against a constant force. Gravity is always pulling straight down. The car's angle is constantly changing. The amount of thrust that is directly opposing gravity changes during its trajectory. It's not constant.
Near the top, very little gravity is actually tipping the car. But most of your thrust is pushing against that small fraction of gravity affecting the car. You'd want very little thrust here to overcome it.
Near the bottom, almost all of gravity is tipping the car. So your thruster needs to have a lot more force to overcome it.
All this to say, this setup doesn't work and will never work with a constant amount of thrust.
Yours truly, an engineer.
Love that you can put a photosensitivity warning!!
Day 1 of asking for evolution of biplane dogfights
Ahhhhhh 3:20
You should play the game Mindustry as it is a very technical game that you might like. It's also free...
New Dyson vacuum confirmed.
Pls play teardown new dlc. Btw love your content keep going
the gyro mug is probably supposed to be spinning fast so the liquid can't spill.
Hmm the suspension bow is cool
Multiplayer Monday with it?
10:23 yay my thingy
6:33
free energy glitch
YAY!!
Two-wheeled truck aka the whiplash mobile
10:30 my faveret creation
do thin inside a room but also have logicc do a repit of the cirket
Suggestion do a YDIB video but bring the guys, and everyone does their own interpretation of the drawing
You almost sounded like coach z when you were taking about the cardboard mess 😂😂😂
Do a flying Tank battle
We need longer videos
THE PIGEON THUMBNAIL. IBISHU PIGEON DRIVERS ASSEMBLEEEEEEEEEEEE
You should start doing scrap,enhancing Olympics again
build a machine that pushes one building into another, creating a domino effect, in instruments of destruction
More ydib!
Day 53 of asking for a glitches only race in Trailmakers
you need more weight on the mug v3
6:30 Rapid unplanned disassembly.
Could u Play teardown plz
Scrapman's /killall is just can be named "scrap snap" and just like thanos, they die
the truck and slingshot bow were great. By the way any word yet on Chapter 2?
2:32 u did remeber to charge the battery righ... RIGHT
Can you Make a vehicle float using spud guns using the recoil?
Day 12: artillery rover battle on the asteroid, orbiting the projectiles
when are you going to play the new teardown update?
I’m a big fan
hoover cardboard multiplayer monday?
I think the glowbug hoover will probably move forward under GB power if the wheels are not powered...this should be tested...
"Get rid of them in a nice Humane way."
*proceeds to use killall command*
3:19 most humane way yes yes
Aww i wanted to hear screams of agony flying by at 4000 kph
third time asking you to play ksp
3:21 my hand is going up on its own 💀
The "two wheels car"... aka the fat motorcycle.
Scrapman should make a YDIB intro song
cant spill cofee that doesnt exist!
Day 1 Of Helping Scrapman On Scrap Mechanic
at 8:30 i would use a piston engine axel
at 12:10 use a logic repeater
Please play Satisfactory again!
try revisiting card life
7:29 "compress under tension"
wat
Hey Scrapman, Teardown released another DLC, you should check it out!
Min 11:46 he cares about us :)
What pc do you have
Scrap man is best
Hey Scrapman, there’s a new update for Teardown. New DLC new Campaign
Space pirate ship fight
Day 1 of asking scrap man to dogfight with submarine cars
15:50 night at the what?
Day 241 of asking Scrapman to search for "Realistic" in the Trailmakers workshop
i was away from discord for 1 week...
i wanted to make a wedge powered wheel...
Where is "You build it, i draw it"?
the cardbot was it
Day 1 of asking scrap man to list the background music in the desc