Ich habe eine sehr ähnlich aufgebaute Maschine. Boehringer von ca. 1920. Der Stift ( Spindelfreilauf und Untersetzungsgetriebe ) macht auch bei mir klackernde Geräusche. Aber nur im Leerlauf. Unter Last ist Druck drauf. Haben Sie denn mal versucht den Futterflansch abzuschrauben ? Ich habe 4 versch. Futter und bekomm' den Flansch des kleinsten nicht ab.
looks pretty much the same as my lathe. i also what the foward nothing backwards pull knob, and the pin in the gear for the bypass for slower turning.. is that a fischer thing? i wonder what brand my lathe is.. it is german thats what i do know
Hi. I have the opportunity to buy such a lathe at a good price, it is probably the AKZ-8. The machine is without engine, can you enter the power and RPM of the engine from your lathe ??
Hi. Unfortunately I can't post a picture of the type plate. Data on the engine: KW 0.95 PS 1.3 220/380V A4.65/2.7 COS 0.73 n 920 The speed depends on the translation from the motor (belt pulley) to the lathe. If that's not enough, I could maybe make a video of the run for you.
@@diebienenflusterer1568 Thanks for the quick reply. In the machine I am looking at, the original drive pulley from the lathe side has been replaced with a V-belt pulley. What is the diameter of the original drive wheel on your lathe ?? Second thing, what is the circumference, thickness and width of the drive belt of the transmission ?? Below a photo of the machine drive.google.com/file/d/1bKk4BBO1TSCYq0NKDmigoLdVTddJMHc3/view?usp=sharing
Nice machine. I did not install the attachment including the gearbox. In my case, the shaft is connected directly to the motor. The way it looks to you, you only need to flange on a motor and it should run. What you are missing, however, is the drive for thread cutting. There should still be some gears there.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
Ich habe eine sehr ähnlich aufgebaute Maschine. Boehringer von ca. 1920. Der Stift ( Spindelfreilauf und Untersetzungsgetriebe ) macht auch bei mir klackernde Geräusche. Aber nur im Leerlauf. Unter Last ist Druck drauf. Haben Sie denn mal versucht den Futterflansch abzuschrauben ? Ich habe 4 versch. Futter und bekomm' den Flansch des kleinsten nicht ab.
Hab im anderen Video eine Antwort geschrieben.
looks pretty much the same as my lathe. i also what the foward nothing backwards pull knob, and the pin in the gear for the bypass for slower turning..
is that a fischer thing? i wonder what brand my lathe is.. it is german thats what i do know
It is an Ariston
@@TheBlackManitu dankie vir die naam👌
Was ist denn das für eine Drehbank? Habe auch so eine ohne Typenschild
Hallo Sven,
das ist eine Ariston.
@@diebienenflusterer1568 dankeschön das hilft mir weiter
Hi. I have the opportunity to buy such a lathe at a good price, it is probably the AKZ-8. The machine is without engine, can you enter the power and RPM of the engine from your lathe ??
Hi.
Unfortunately I can't post a picture of the type plate.
Data on the engine:
KW 0.95
PS 1.3
220/380V
A4.65/2.7
COS 0.73
n 920
The speed depends on the translation from the motor (belt pulley) to the lathe.
If that's not enough, I could maybe make a video of the run for you.
@@diebienenflusterer1568 Thanks for the quick reply. In the machine I am looking at, the original drive pulley from the lathe side has been replaced with a V-belt pulley. What is the diameter of the original drive wheel on your lathe ?? Second thing, what is the circumference, thickness and width of the drive belt of the transmission ?? Below a photo of the machine drive.google.com/file/d/1bKk4BBO1TSCYq0NKDmigoLdVTddJMHc3/view?usp=sharing
@@jj19-82 Willingly
the shaft above 11cm
At the engine 7cm
The strap 4cm wide approx. 100cm long and 2mm thick
Nice machine.
I did not install the attachment including the gearbox.
In my case, the shaft is connected directly to the motor.
The way it looks to you, you only need to flange on a motor and it should run.
What you are missing, however, is the drive for thread cutting. There should still be some gears there.
Ahhh just seeing.
There are gears lying on the bench and hanging on the sled.