A collection of a few other models: bchtechnologies.com/blog/how-to-put-printers-in-firmware-recovery-update-mode/ If I missed some, please hit "Reply" and comment below. Thanks.
Thank you so much for this remedy! Also, I found that the first method actually worked for me. The shutdown on the printer doesn't happen automatically after the computer completes its update. The power button on the printer started to flicker a bunch of times and I just let it sit for like 5 minutes and it then shutdown on its own. When I turned the printer back on it started up! Thank you so much again for this tutorial video! Cheers!
Hello, In this video, you said to press power button, home button, stop button and number 1 if the first method did not work. Do you know what I should press if my printer does not have numbers? I have the Epson 3760 on recovery mode, as well. Thanks in advance for your help.
Hi I've got an epson l555 ecotank that's stuck in recovery mode after there was a crash whilst the firmware was updating, it doesn't have the home key, is there another way? Epson are extremely unhelpful and basically told me to buy another, any help much appreciated
Hey Kevin, I have WF 4740, and my printer is stuck on the boot screen. Firmware upgrade doesnt work and it doesnt have a reset button except the power button. are you familiar with how to fix this? is there a hard reset of the software on this printer somehow?
Kevin, I have the new Epson ET-4760 with ink tanks. It does not have an "orange" button on the front of the printer in order to do the "4-finger" second method you described. How do I fix this new printer stuck in Recovery Mode?
Hello ! Thank you for your method video , could you please tell me if it also works with Mac 10.13 ? I followed your methods but the printer shows DATA File is not found .
I accidently turned off the printer while it was on firmware update. now its not detecting through cable nor wifi. upon connecting ti iWIC its says Epson MFP-IPL (Service Mode). I dont knwo what to do
Hello, I have a Epson Artisan 835. The unit will power on and start the startup sequence, however stops about 15 seconds into the start up and shuts down. The menu, display/crop, back button and home button flashes. I’m not sure what that means and was hoping you can help. Epson tech support was useless. Thank you.
Hey Kevin. I’m trying to use the second method now with my WF7720 but the computer can’t find the printer (connected by the same cord they were 10 mins ago which caused recovery mode incident). Is there any way to troubleshoot this? Screen on printer is showing ROM FIRMWARE UPDATE MODE FA07. Thank you in advance!!
I figured out myself how to solve this, but starting here. The printer I have is a EPSON L475, the pattern to reach Update Mode was different. There is 3 patterns in total for different models. For me was Cancel+Left+Home+Power. I succeded at installing Firmware but nothing changed. After a lot of experimenting I tried something specific. I picked up an old machine with Windows 7, then I ran the Adjust Program for my printer with compatibility mode for Windows XP SP3 and finally I applied a "Initial Config". After all of that the printer is usable again 😁👍
Hey, Kevin what should be the problem if the recovery firmware doesn't recognize the machine connected to USB? My Epson ET 4750 is in printer inspection mode and the recovery firmware doesn't recognize it as connected. When I connect an another working ET 4750 via the same USB, the recovery firmware recognizes it and it appears as available for downgrade.
Hi there! good afternoon, excuse me to reinstall the firmware of the Epson L6171 printer, do you follow the same steps? or is it another configuration? Thanks
EPSON WorkForce Pro WF-C5790 key combination: 4 + 7 + Job/Status(i) + Power button. Then run the update from a PC. After the update is done, the printer will light up like a Cristmas tree (all lights blinking). Thank you very much for your video.
hi! my lights up like a christmass tree too. then I turn it off, then on. IT SHOWS EPSON but then it goes completely black. Only led light on the power button.
Hello Mr Kevin! I have an Epson XP-3105 with the same problem and no way to access the printer for a firmware update. Is there a similar method as the second one in the video? Thanks for your reply.
@@Imran-wg2yq Tried several things I found on the web, combinations of buttons. None worked. Had to take it back to the seller for a reset. Seller put it through to the nearest Epson technical centre (Utrecht in the Netherlands in my case, some 200km from where I live). I asked to join a note about how to do it myself if ever the need arose. None arrived. The printer worked, but the first thing the display said was to update the firmware, so they hadn't done that at the service centre. I'm a bit reluctant to try doing it once more. So far for Epson goodwill ...
Please advise. Epson XP3105. When turning on the printer, the screen says System error and at the bottom the code 302625. At the top there is a cross in a red circle and there is no error indication next to it. Cartridges are inserted. Paper is inserted. What could it be?
Hi, I have an Epson xp 340, I got a recovery mode screen after a failure to update a firmware (accidentally the printer's power cord was pulled out while I was doing the update) after checking videos how to fix it, I got to the update mode screen and I could download the new firmware (Epson support webpage) Everything went ok, the printer screen showed that the download was complete, but went I turned off the printer and back on, the power button light is lit now, but the screen went black and nothing happens, what could be wrong now?
@@BCHTechnologies Yes, I did, the printer screen said that the download was complete, and it showed too what kind of firmware was and some others details.
can u help hang/stuck problem? no function button then hang all printer programme.why? this video like how can ill return to SCM FT mode to Normal mode by direct on? epson L4160
A friend of mine has the Epson L6570 printer and it is stuck on update mode but there are no firmware update files on Epson for this printer. Would you happen to know where he could download a firmware file to get out of this mode and fix his printer?
It didn’t work for me. I’ve done everything in the video though I have a WF-2860 but even when everything goes correctly when I turn it off and turn it back on it goes right back into recovery mode
This also worked for my ET-4750! You do have to wait 5-10 minutes for it to automatically shut down after the firmware update, it won't change immediately.
Hi! Help please. How to do the 2nd method in L5190? Also, for the 1st method, the firmware update is not appearing on my computer. I think the firmware update on my computer was completed but in the printer is not. 😭😭
Hello Kevin can you help me regarding of this problem to my Printer. My Printer Epson ET-2760 is stuck for Printer Recovery mode how can I fix that ... please help .. thank you
Hello, I hope you can help me solve my problem, I tell you... I have an EPSON ecotank L4260, I have the application on my cell phone, when I want to scan as I regularly do, I open the application and it tells me that there is an update which I accept, and it tells me to turn off the printer, in the end it gives me a message that the update could not be carried out and a message appears on the printer screen
I have a epson expression home xp-4100 and can't get it to go into special Firmware Update Mode. It keeps coming up I need ink which I know. Is this interfering with it?
On my M2120, unfortunately, I have the same problem. I tried everything. I notice when I press the OK+ arrow down + power button it turns off. However, nothing happens when I power it on. Its firmware update problem is the same. Any suggestion for help in this matter would be appreciated, please.
My printer is doing this, but isn't the same model. IT's a XP-7100. Touchscreen only. Only button is a power button. How do I fix that? Method 1 didn't work
Hallo, I have a problem. I just bought an Epson xp 3200 series printer. I think I made a mistake during the installation process and now the printer is not working. The error is, there is Epson Device Recovery Mode Update Firmware written on the screen and I cannot do anything. What should I do? Can you help me?
Hi Kevin, I have the problem : Recovery mode , My printer is Epson WF 4730. So the buttons are different with yours on this clip. Please instruct me to solve it. I really appreciate your help.
Hi Kevin - My XP - 4100 printer is stuck in recovery mode. I already downloaded new software for printer from website. It does not have the numbers on printer to hold in order to reset. What else can I try?
yes hello... there is no way to get my printer out of the recovery mode..i dont know how it got into recovery mode.. it was fine and working the only thing it would not do is scan anythiong but it did recieve the pictures from the scan disk thing when i put it in..ive plugged it and unplugged it. left it off for 15 minutes and iut does nohng still
Any idea what it means when an Epson ET-2550/C462R starts up saying "Printer Mode" on the display, and eventually says, "Flag check Inspection: ON Initial Charge: OFF Push [Power] BT" ? Mine somehow ended up doing this after I cleaned the print heads with alcohol and water and then let the firmware updater run. I've been trying find a service manual for the printer, but I can't find any reference to this model's tech manuals online.
if you manage to get to service menu (power+home buttons works for L4160) you will see that first menu is Printer Mode, second is Mecha Mode, third SP Mode. I went through them all (Printer Mode needed a "Jig" which somehow worked when I lifted the lid with scanner), after power cycle (no need to remove cable, I started start normally using only power button) and it went to Mecha Mode. I did all the self tests there and did another power cycle. Now the printer starts in SP Mode and so far after doing all the tests (last is ROM check) it still boots up to SP Mode. So the question is how to pass the SP Mode to remove the "Inspection: ON" to go to Normal Mode automatically. I hope to solve this as I passed all the test in SP Mode. There is also Develop Mode which I am checking now.
@@desortp Can you be a little more specific about the "jig" you mentioned? Mine comes up in PRINTER MODE when I press the power button, and the only other thing I can get it to do is give me the red screen with "Inspection Mode: ON" when I press power again.
@@desortp On my ET-2550, I found that holding Power, Home, Stop (red inverted triangle), and the Down arrow on the printer panel while powering it on gets me into the menu you described.
@@Culturedropout unfortunately I don't know what exactly is "Jig" in the printer but I suppose something mechanical or an object in the printer. I opened the lid and looked inside while I pressed OK for "Jig" somehow it accepted and did a test of the "jig"
I did the firmware upgrade and the printer automatically turned off like the instruction said for XP-446. I waited after it powered off and nothing. I tried powering it on, but only the power button light comes on, not the little screen that controls everything. The screen remains blacked out. Prior to upgrade from Epson website, it was working aka letting me know it's stuck in recovery mode. Please advise.
Dear Sir, My WF7610 don't turn on. Plugging the power cord and pressing the power button, nothing happen, just a short lighting of the blue led and a little (little little) scratch from buzzer and no mechanical movements. The screen is completely black. Following your procedure (power + home + 1 + reset) I restored the firmware, and it was correctly entered. Anyway, no reaction after the powering on... Sometimes blue led blinks for 5 seconds, mostly for one only. Lcd always blank. Any hint? Thanks in advance.
Not exactly applicable for my model - but - put me on the right track on the button sequences to get to a start up screen. Thought my ET-2760 might have been bricked after a failed firmware update - thank you !
@@trentmitche11 Hold power and home button down and for me brings up a menu with choices - #4 is "NORMAL MODE" gets me back to normal menu. BUT - seems every time I power off I have to do this. Also - despite unit showing on my network EPSON software refuses to see it. It is on network - can even access it via Chrome . .. Good Luck - hope you can fully solve it.
@@JPL19 Awesome! That got me a little closer I think. Same deal though, firmware software sees it but won't allow me to update it. If I get further I'll post back. Thanks!
Hello your videos are very very good. But i hope you can help me. I have the problem that after installing firmware it shows me on display "Rom is not writable". I tried it several times but it stays in recovery mode and shows always this message after firmware update. Im sorry for my english is not so good.
@@77oxem This is common when Epson has different EEPROM's for the same printer model. Your firmware was written for a different EEPROM. If your printer is still under warranty, you can call Epson and ask the if they can provide a different firmware update for your printer.
A collection of a few other models: bchtechnologies.com/blog/how-to-put-printers-in-firmware-recovery-update-mode/ If I missed some, please hit "Reply" and comment below. Thanks.
Thanks very much !!
what works for model ET 3750?
I tried the steps for the 3700 series but it did not work
SX455W??? will any of it work?
My printer won’t turn off at all to try the second mode unless I unplug it. So it’s hard to hold down all these things any thoughts?
I have the wf 7720
Thank you so much for this remedy! Also, I found that the first method actually worked for me. The shutdown on the printer doesn't happen automatically after the computer completes its update. The power button on the printer started to flicker a bunch of times and I just let it sit for like 5 minutes and it then shutdown on its own. When I turned the printer back on it started up! Thank you so much again for this tutorial video! Cheers!
Will this work for Epson Et-15000? Or what button to press on the Epson15000 printer. Its only has power, home, and help button on it.
Saludos. Encontré un canal honesto. Lo felicito su método me ayudó muchísimo. Gracias. Bogotá Colombia
Yo, the first method saved my life bro. Big shoutout from Brazil.
You helped me way more than Epson's tecnicals. Thank you very much!
Epson L4160
xp-15000 doens't have those buttons. Whats the secret key combo on the xp-15000?
Hello, In this video, you said to press power button, home button, stop button and number 1 if the first method did not work. Do you know what I should press if my printer does not have numbers? I have the Epson 3760 on recovery mode, as well. Thanks in advance for your help.
Hi I've got an epson l555 ecotank that's stuck in recovery mode after there was a crash whilst the firmware was updating, it doesn't have the home key, is there another way? Epson are extremely unhelpful and basically told me to buy another, any help much appreciated
I have tried but it's not working still
Tried both methods, but nothing, it still is on recovery mode. My printer is a WF-2830 and need help ASAP.
Hey Kevin, I have WF 4740, and my printer is stuck on the boot screen. Firmware upgrade doesnt work and it doesnt have a reset button except the power button. are you familiar with how to fix this? is there a hard reset of the software on this printer somehow?
Kevin, I have the new Epson ET-4760 with ink tanks. It does not have an "orange" button on the front of the printer in order to do the "4-finger" second method you described. How do I fix this new printer stuck in Recovery Mode?
Do you have similar solution for epson et3750? I would try anything.
Hello ! Thank you for your method video , could you please tell me if it also works with Mac 10.13 ? I followed your methods but the printer shows DATA File is not found .
I accidently turned off the printer while it was on firmware update.
now its not detecting through cable nor wifi.
upon connecting ti iWIC its says Epson MFP-IPL (Service Mode).
I dont knwo what to do
Hello, I have a Epson Artisan 835. The unit will power on and start the startup sequence, however stops about 15 seconds into the start up and shuts down. The menu, display/crop, back button and home button flashes. I’m not sure what that means and was hoping you can help. Epson tech support was useless.
Thank you.
Is there any software for C-5710?
None of the solutions work for this model
How about the Epson ET-2760 Printer...? Thank you
Hey Kevin. I’m trying to use the second method now with my WF7720 but the computer can’t find the printer (connected by the same cord they were 10 mins ago which caused recovery mode incident). Is there any way to troubleshoot this? Screen on printer is showing ROM FIRMWARE UPDATE MODE FA07. Thank you in advance!!
Hi Keven. Great vid. Do you have to combination for aan Epson ET 3700 thats stuck on Recovery Mode? Cheers
Arthur
I figured out myself how to solve this, but starting here. The printer I have is a EPSON L475, the pattern to reach Update Mode was different. There is 3 patterns in total for different models. For me was Cancel+Left+Home+Power. I succeded at installing Firmware but nothing changed. After a lot of experimenting I tried something specific. I picked up an old machine with Windows 7, then I ran the Adjust Program for my printer with compatibility mode for Windows XP SP3 and finally I applied a "Initial Config". After all of that the printer is usable again 😁👍
i have a wf 2850 thats stuck in recovery mode and i cant find anything to do what you did here
Hey, Kevin what should be the problem if the recovery firmware doesn't recognize the machine connected to USB? My Epson ET 4750 is in printer inspection mode and the recovery firmware doesn't recognize it as connected. When I connect an another working ET 4750 via the same USB, the recovery firmware recognizes it and it appears as available for downgrade.
Hi there! good afternoon, excuse me to reinstall the firmware of the Epson L6171 printer, do you follow the same steps? or is it another configuration? Thanks
EPSON WorkForce Pro WF-C5790 key combination: 4 + 7 + Job/Status(i) + Power button. Then run the update from a PC. After the update is done, the printer will light up like a Cristmas tree (all lights blinking). Thank you very much for your video.
hi! my lights up like a christmass tree too. then I turn it off, then on. IT SHOWS EPSON but then it goes completely black.
Only led light on the power button.
@@Rodrybur95 how did you turn it off?
hello, this does not work on my Epson L485, do you have solution, on this model? Thank you!
Any idea for L15150? Please help
Hello Mr Kevin! I have an Epson XP-3105 with the same problem and no way to access the printer for a firmware update. Is there a similar method as the second one in the video? Thanks for your reply.
I have the same problem, too, so you can tell me how you did it?
@@Imran-wg2yq Tried several things I found on the web, combinations of buttons. None worked. Had to take it back to the seller for a reset. Seller put it through to the nearest Epson technical centre (Utrecht in the Netherlands in my case, some 200km from where I live). I asked to join a note about how to do it myself if ever the need arose. None arrived. The printer worked, but the first thing the display said was to update the firmware, so they hadn't done that at the service centre. I'm a bit reluctant to try doing it once more. So far for Epson goodwill ...
@@pauladriaenssens thank you very much
@@Imran-wg2yq Well, sorry that wasn't very helpful, was it?
How do you get it Epson P600 out of inspection mode??
what about L386 and other ecotank models ?
Please advise. Epson XP3105. When turning on the printer, the screen says System error and at the bottom the code 302625. At the top there is a cross in a red circle and there is no error indication next to it. Cartridges are inserted. Paper is inserted. What could it be?
My Epson WF-2660 printer is stuck in inspection mode after firmware update. Haw can I turn it off? Thank you!
Hi, I have an Epson xp 340, I got a recovery mode screen after a failure to update a firmware (accidentally the printer's power cord was pulled out while I was doing the update) after checking videos how to fix it, I got to the update mode screen and I could download the new firmware (Epson support webpage) Everything went ok, the printer screen showed that the download was complete, but went I turned off the printer and back on, the power button light is lit now, but the screen went black and nothing happens, what could be wrong now?
This is exactly my issue and I can't find a solution. Anyone?
Did you see the firmware update is completed on the printer? It usually takes 5 to 15 minutes. Don’t shut down the printer before it is done.
@@BCHTechnologies Yes, I did, the printer screen said that the download was complete, and it showed too what kind of firmware was and some others details.
thank you Kevin at BCH, you helped make my tech illiterate mum happy 👍
can u help hang/stuck problem? no function button then hang all printer programme.why? this video like how can ill return to SCM FT mode to Normal mode by direct on? epson L4160
A friend of mine has the Epson L6570 printer and it is stuck on update mode but there are no firmware update files on Epson for this printer. Would you happen to know where he could download a firmware file to get out of this mode and fix his printer?
i have a newer version of this printer i have no home or stop button what would i do then?
It didn’t work for me. I’ve done everything in the video though I have a WF-2860 but even when everything goes correctly when I turn it off and turn it back on it goes right back into recovery mode
How did you fix yours
This also worked for my ET-4750! You do have to wait 5-10 minutes for it to automatically shut down after the firmware update, it won't change immediately.
I can't find firmware for pro wf c4810. You can help me?
it did not worked on my L565, ive waited for like 5 hours and still no signs of any progress, is there anything i can do to fix it?
Hi,Kevin,do you have any idea how to fix the L4168 model pls?
What’s wrong with the printer?
Φίλε, ευχαριστούμε πολύ. Το έφτιαξα!!!
Παρακαλώ!
WF-3823 stuck in recovery mode. I don't have any of those buttons to the right of screen! Please help!
Hi Kevin could help me for EPSON FR-2510? on display shown "Printer Mode"....Thanks Advance
YES THIS WORKED FOR MY ET-4760!!! YOU ARE AN ANGEL!
Thanks. Working on getting my wings.
what are the button combos for this model??
Is there any way to clear dish printers are has I have o x 97 and have cleaned and unclog the printhead throw away
Thoroughly
Hi! Help please. How to do the 2nd method in L5190? Also, for the 1st method, the firmware update is not appearing on my computer. I think the firmware update on my computer was completed but in the printer is not. 😭😭
How about Epson L365 same problem? Thanks
Hello Kevin can you help me regarding of this problem to my Printer.
My Printer Epson ET-2760 is stuck for Printer Recovery mode how can I fix that ... please help .. thank you
Hello, I hope you can help me solve my problem, I tell you... I have an EPSON ecotank L4260, I have the application on my cell phone, when I want to scan as I regularly do, I open the application and it tells me that there is an update which I accept, and it tells me to turn off the printer, in the end it gives me a message that the update could not be carried out and a message appears on the printer screen
hey hi my printer stuck on printer mode model is l565 can you please help with this
Hi! What can I do if my Epsonxp7100 is stucked in program update mode :(
How about Epson L8180 ??
Thank you so much the first method worked I am so relieved
can someone please HELP me!! both options don't work. the printer lcd keep saying ''ROM IS NOT WRITABLE'' when I try to install the software
Did you ever figure out this issue? I ran into the same problem even after trying both methods.
I have a epson expression home xp-4100 and can't get it to go into special Firmware Update Mode. It keeps coming up I need ink which I know. Is this interfering with it?
Hi.my printer Epson wf pro c5790. My printer have fatal error 031004.can you help me ?what should I do ? Thanks
On my M2120, unfortunately, I have the same problem. I tried everything. I notice when I press the OK+ arrow down + power button it turns off. However, nothing happens when I power it on. Its firmware update problem is the same. Any suggestion for help in this matter would be appreciated, please.
HI! Same problem. any news?
My printer is doing this, but isn't the same model. IT's a XP-7100. Touchscreen only. Only button is a power button. How do I fix that? Method 1 didn't work
what about being stuck i recovery mode epson stylus photo px660
Hallo, I have a problem. I just bought an Epson xp 3200 series printer. I think I made a mistake during the installation process and now the printer is not working. The error is, there is Epson Device Recovery Mode Update Firmware written on the screen and I cannot do anything. What should I do? Can you help me?
I got the Same problem. Did you solve it? Could you help me
Hi Kevin,
I have the problem : Recovery mode , My printer is Epson WF 4730.
So the buttons are different with yours on this clip.
Please instruct me to solve it. I really appreciate your help.
See this video th-cam.com/video/F78BuqBW22Q/w-d-xo.html
Thanks so much, this solves my problem with the first method
Hi! great vid! Sadly, mine only shows the EPSON logo and then it goes completely black. What could i do? WORKFORCE PRO WF-C5790
is there a method 2 for ET-3750? please help
Thank you very much man! I had this problem and I was able to solve this with your advices.
Thank you so much for this VDO
The First method worked successfully
This was on spot for me! It solved my problem quickly!
Hi! reset l475?? Thanks
Hi Kevin - My XP - 4100 printer is stuck in recovery mode. I already downloaded new software for printer from website. It does not have the numbers on printer to hold in order to reset. What else can I try?
STOP + LEFT ARROW + DOWN ARROW + POWER - wait until all LEDs except Power LED is ON - then Release all buttons.
@@BCHTechnologies I tried that and it says file not found. any thoughts?
yes hello... there is no way to get my printer out of the recovery mode..i dont know how it got into recovery mode.. it was fine and working the only thing it would not do is scan anythiong but it did recieve the pictures from the scan disk thing when i put it in..ive plugged it and unplugged it. left it off for 15 minutes and iut does nohng still
Method 1 worked.... Thank you!!
Any idea what it means when an Epson ET-2550/C462R starts up saying "Printer Mode" on the display, and eventually says, "Flag check Inspection: ON Initial Charge: OFF Push [Power] BT" ? Mine somehow ended up doing this after I cleaned the print heads with alcohol and water and then let the firmware updater run. I've been trying find a service manual for the printer, but I can't find any reference to this model's tech manuals online.
I have the same issue with L4160. That Updater is so annoying and will eventually brick every single epson printer. so bad
if you manage to get to service menu (power+home buttons works for L4160) you will see that first menu is Printer Mode, second is Mecha Mode, third SP Mode. I went through them all (Printer Mode needed a "Jig" which somehow worked when I lifted the lid with scanner), after power cycle (no need to remove cable, I started start normally using only power button) and it went to Mecha Mode. I did all the self tests there and did another power cycle. Now the printer starts in SP Mode and so far after doing all the tests (last is ROM check) it still boots up to SP Mode. So the question is how to pass the SP Mode to remove the "Inspection: ON" to go to Normal Mode automatically. I hope to solve this as I passed all the test in SP Mode. There is also Develop Mode which I am checking now.
@@desortp Can you be a little more specific about the "jig" you mentioned? Mine comes up in PRINTER MODE when I press the power button, and the only other thing I can get it to do is give me the red screen with "Inspection Mode: ON" when I press power again.
@@desortp On my ET-2550, I found that holding Power, Home, Stop (red inverted triangle), and the Down arrow on the printer panel while powering it on gets me into the menu you described.
@@Culturedropout unfortunately I don't know what exactly is "Jig" in the printer but I suppose something mechanical or an object in the printer. I opened the lid and looked inside while I pressed OK for "Jig" somehow it accepted and did a test of the "jig"
Do you know how to force a WF-4734 into recovery mode ?
I did the firmware upgrade and the printer automatically turned off like the instruction said for XP-446. I waited after it powered off and nothing. I tried powering it on, but only the power button light comes on, not the little screen that controls everything. The screen remains blacked out. Prior to upgrade from Epson website, it was working aka letting me know it's stuck in recovery mode. Please advise.
Hi! what did you do? i have the same probm
@@Rodrybur95 got a new printer, HP printer
How do I complete this with an Epson WorkForce WF-7720? Thanks...
Do you fix the problem I got the same problem
Thanks.
For Epson WF 645 - Press Stop, Left Arrow, Print Photo (Green), Power to get into recovery mode
For Epson ScF100?
Dear Sir,
My WF7610 don't turn on.
Plugging the power cord and pressing the power button, nothing happen, just a short lighting of the blue led and a little (little little) scratch from buzzer and no mechanical movements.
The screen is completely black.
Following your procedure (power + home + 1 + reset) I restored the firmware, and it was correctly entered.
Anyway, no reaction after the powering on...
Sometimes blue led blinks for 5 seconds, mostly for one only.
Lcd always blank.
Any hint?
Thanks in advance.
If your main board has a problem, flash a firmware won’t help.
I will make a video showing how to fix power problem later.
What buttons do I need to hold down on WF-7710
Hi..have you solve the problem???
Muchas gracias / thank You so much
Thank you so much. It worked!
Thank you so much for your video!
I didn,t find the Update in my Epson Program
The first step ?? Pleaaaase help
Thank you very much 😃
Thanks Kevin
thank you so much, fixed my printer.
Ok my mother in law's Epson printer is stuck in recovery mode after updating I have no computer only a mobile phone device how can I fix this
You can’t do it without a PC.
You can’t do it without a PC.
method one worked omg you're a life saver!!
Thanks this was really helpful
Not exactly applicable for my model - but - put me on the right track on the button sequences to get to a start up screen. Thought my ET-2760 might have been bricked after a failed firmware update - thank you !
What button sequence did you use? I have an ET-2750 that failed the update and is stuck. Cheers
@@trentmitche11 Hold power and home button down and for me brings up a menu with choices - #4 is "NORMAL MODE" gets me back to normal menu. BUT - seems every time I power off I have to do this. Also - despite unit showing on my network EPSON software refuses to see it. It is on network - can even access it via Chrome . .. Good Luck - hope you can fully solve it.
@@JPL19 Awesome! That got me a little closer I think. Same deal though, firmware software sees it but won't allow me to update it. If I get further I'll post back. Thanks!
how about l565?
Hello your videos are very very good. But i hope you can help me. I have the problem that after installing firmware it shows me on display "Rom is not writable". I tried it several times but it stays in recovery mode and shows always this message after firmware update.
Im sorry for my english is not so good.
What is your printer model?
@@BCHTechnologies Epson xp-960
@@77oxem This is common when Epson has different EEPROM's for the same printer model. Your firmware was written for a different EEPROM. If your printer is still under warranty, you can call Epson and ask the if they can provide a different firmware update for your printer.
@@BCHTechnologies thank you for your help
thank you very much this video helped me a lot with the first option I LOVE YOU THANK YOU ❤️
Dang! Didn't work for me. Says my firmware status is "downgraded (it cannot be updated)". And I don't have a Home button.
It works, thank you very much!
Thanks Bro BIG THanks!