I am 49 years old. Always been a little bit of a computer nerd, but started doing PC builds, upgrading IMacs, tearing and rebuilding laptops about 2 years ago. I love it. Learning about overclocking tuning from your video makes me feel like a kid again. Thank you!
tl;dw undervolt reference for vega 56: Under Power Tuning, set Power Limit to the highest (i.e. 50%). Under GPU tuning, set voltages to 800, 840, 880, 890, 900, 960, 1020, 1070. Under VRAM tuning, set max voltage to 1000, and set max frequency to 920.
I updated my Adrenalin Driver yesterday and I tought "I'm gonna write to the Ancient Gamplays dude and ask if he can do an undervolting guide for this driver". You are our fuc**ng hero, bro!!
My man, if you are ever in my neck of the woods or if I'm ever in your neck of the woods, I owe you a pint. Using the Division 2 benchmark, I went from a 59 FPS average with a score of 5993 in the benchmark to a 86 FPS average and a score of 7680. I did go with a slight more conservative route with the state 7 at 1660 Mhz. I'm going to run the full benchmarks on it today as it was 4am when I finished last night. Again, you rock and keep up the good work!
Wow man you’re a genius!! I just upgraded my card and moved from nvidia to amd and got a Vega 56. I usually overclock in msi afterburner and I wasn’t comfortable with amd software. I tried overclocking my Vega 56 in msi afterburner and I didn’t get that much performance. I watched your video and loaded your profile and booom! Got so much more performance! Thank you bro! Keep up the good videos ❤️
If you flash Vega 64 VBIOS onto a Vega 56 GPU you can get a nice boost on memory overclocking. It won't make any difference to anything else since the core is cutdown but it's still very much worth it. You can get 1000Mhz or more on memory as it allows you to drive the memory controller to a higher voltage as well (Vega 64's memory controller voltage is 1100 by default).
So you inspired me to oc my 5700 flashed to an xt. I put an Arctic Accelero Extreme IV on it last night and it's crazy how cool the junction temps are! My case is an NR600, 3 120mm intakes on the front, 1 rear 120mm exhaust, and 1 120mm exhaust on top. Air Cooling ftw!
Nice one,Thx! I'm still working on my settings since 2018. Definitely better then the stuff you can choose in the Adrenaline Driver. My sweet spot is about 1450mhz GPU and 925mhz Vram. Less then 950mV on my UV setting so far. Power consumption is about 170W.
Hey bro, im forigner too, i have a moderate english, and your pronunciation is very clear to my understand, much better than natives peoples, with so many abbreviations. Nossa, lendo os comentários, vi que você também fala português, bem, saudações do Brasil ;)
@@AncientGameplays It works a bit, but I feel like my power consumption isn't really any better.... According to HWinfo or GPUZ it stays at 221W or even 330+W with +50% power limit even though I'm undervolting. I want to find the sweet spot between boosting performance and lowering consumption but lowering the voltage doesn't seem to make any difference. Any advice maybe, you cheeky bugger?
@@emymagkuchen That is not how it works xD 220W is already with the %50 power. Like i said in the video "It doesn't mean that the card will use more power, it means that the card will use it if needed". And 220W with those settings is great
One of the better guides for this underrated card. Hope many would not blindly follow this guide and expect things just work smoothly. All cards are different and components will degrade over time.
Your VIdeo is a blessing, just recently came into posession of a Sapphire Pulse Vega 56, Hynix memory but thanks to your profile tweaks I am now rocking her at 1662/950MHz with the GPU going in furmarks burn-in up to 1650MHz, rock solid not too hot at 220W. Needless to say it really boosted the performance by a lot, must be by now 50% faster than my old RX 580 8GB.
I have same card too. Set mine to 1650 and 950. Couldn't quite reach 1662 in Futuremark. Great cards aren't they. Makes you smile knowing you are getting a bit extra for your cash too 😁
@@RobotischeHilfe What card do you have and have you set the settings as used in the video? I will check mine and post exactly what I have, but the base is the same as this video. Using HW Monitor it boosts to just over 1700 at times, which is crazy
Another great video! Just wanted to get back on my last comments.. Had problems over problems.. End of the thing was a hardware defect! But a day later my rx 5700 xt came so the 580 went back and I get my money back so I can get the 3600.. Got really, lucky Thanks for the support
I have just bought a Vega 64 for £85 which is a cracking deal in the UK! really looking forward to testing it out. Won't touch my 3090 but for the price:perf this is the best card I've ever got.
@@AncientGameplays agree mate! - will be watching your video on undervolting Vega 56. I've got the reference model so undervolt is key for me to keep temps/noise down. I'm guessing not much has changed from your video to now? :)
You guys wanted a REMAKE for this video so here it is! Now SMASH that LIKE BUTTON and share it with your friends and communities to help this video go to trending :D P.S. Sorry if i rushed some steps like the fact that vega cards come way overvolted and that you shall try to increase frequency or decrease voltage 10Mhz or 10Mv at the time in order to get the maximum frequency for that voltage, or to get the lowest possible voltage for that frequency. Like i said, VEGA cards are funny to tune and these were the "sweet spot settings" i found.
@@AncientGameplays Great to hear! May I add a bit on constructive criticism? I think it will add to the tutorial if you show a before and after test in a few games to work out the performance benefit you would gain with the OC as well as the draw backs such as temperature and fan speed differences. I really appreciate your videos so please don't take my feedback as an insult. I look forward to the next video, Thanks again for the clear and informative videos. 👌
Have not benched a whole lot but so far in Division 2 I saw a 15 frame increase at ultra detail using your settings. I have the Power color Red Dragon version of Vega 56.
És o maior, caralho. Volta e meio venho aqui para ver se ainda tens actualizado os profiles para um gajo carregar e não tens falhado. Por acaso também tenho a versão sapphire da vega, por isso é só copy/paste e tá a andar. Continua que tás no bom caminho !
First of all, thank you for the video. Everything was explained perfectly understandable^^ my question concerns the fan tuning. Why didnt you touch that and why would you leave 0rpm mode on? I was thinking that it has to do with power usage but im new to this subject. would love for an answer. Keep up the good work!
0 rpm is nice because when there is no load on the card, the fans dont need to spin because it doesnt get very hot. It just helps with keeping your computer quiet when your not doing gpu heavy tasks, like watching youtube etc.
I got my sapphire nitro+ rx vega 64 undervolted/overclocked to 1715mhz core @ 1065mV and 1120mhz memory @ 951mV @ +50% power on air @ 100% fan speed for gaming purposes all stable. While gaming the core is actually 1650mhz average. This gained me 8-15 more FPS @ 4K in all my games. The hottest I’ve seen it get is 70c and I play in 4K max settings 60FPS. Average power consumption is around 300W.
I bought my friend a vega 56 a bit over a year ago and if I remember correctly it could do 1700Mhz with 20mV undervolt but it ran optimally at 1590-1650Mhz with 50mV undervolt. I cant remember more details but I think it did 950Mhz on the memory but anything over that and games started glitching like I have never seen. Atleast witcher 3 did, the character started teleportin etc. I ran it in a open bench but the 1700Mhz overclock was not stable in my friends case
Just picked up a XFX Vega 56 blower style, first thing i did was take stock benchmarks then took it completely apart lol. Took off what little dust there was and put liquid metal, cut out the bracket so let air flow out much better and unplugged the LED's lol. Stock clocks where ~1280-1360 in some benchmarks and ~1320-1380 in others, without any changes in software or overclocking/undervolting it jumped to ~1420-1520. Now I'm going to try your recommend settings and see where it goes
Windowed 1080p maxed FFXV windows benchmark loop - 4900 stock (82c, 2600rpm) - 5280 Liquid metal and opened bracket (84c, 2400rpm) - 5700 +30% power ~1580(1640)/1.07v 920/1v (74c 2300 rpm) - Adjusted fans to level out at 2020rpms at 80c, ~1560MHz and 5660 score. Think ill leave it there ;-) *i averaged out of 2 or 3 runs Now to loop other benchmarks and stress tests to ensure stability :/ lol
I didn't even knew you before, but since the vid started I thought to myself "This guy sounds portuguese as fuck despite speaking perfect english" and then that zero followed by pimbalhada and SIIIII xD
@@AncientGameplays The worse thing is that it is a "refurbished" GPU they actually returned because it's Hynix. It even smelled like new when I opened it lol. 260€, May 2019 (Spain). At the moment core running at 1600, undervolt and auto fans (quite silent and still performing great without having to change the power limit!)
They must be using cheap HBM compared to the reference models at launch, I was disappointed when mine was unstable above 1070mhz when other people could hit 1100mhz. I dropped it back to 1050mhz to be safe.
Hola bro no entiendo muy bien todo este tema, ¿podrias indicarme como hacerle overclock a esta misma tarjeta? Simplemente copio lo que hizo el en el video? Un saludo, gracias!
If you're keen for performance definitely consider a Vega64 bios flash too, pre flash I couldn't get ram beyond 950-960, after the flash, the ram was stable at 1100 mhz all day
Boas Fábio, gostaria de perguntar algo se me conseguires explicar. Já que a memory voltage não é o controlo da voltagem da memória hbm2 mas sim a voltagem base da placa, porquê aumentar de 950 V para 1v? Desculpa ai e continua o bom trabalho.
é a voltagem do Controlador de memória, que por sua vez vai ser a base. Sendo que estamos a aumentar frequência podemos aumentar também a voltagem do controlador de memória
@@AncientGameplays I used your profile and it wont even load Borderlands 3. It locks up at the optimizing shaders screen. Its an MSI air boost with aggressive fan curve.
If you have Hynix memory I feel sorry for you, really :( Also if u're using MSI afterburner click on settings and uncheck the "Erase autosaved startup settings" else every time you restart your PC the wattman settings will reset, that alone gave me enough headaches till i figured it out P.S: Touching the TRUE memory voltage is a big nono cause even 5mv more will burn your card
Great Video Man! I just purchased a slightly used Sapphire Nitro+ RX Vega 56 Limited Edition for $175. I still haven't used it because I'm needing a PSU upgrade sooner. Hope this video can help me later. :D
I bought a Vega 56 at launch & have it running in a custom water loop. I flashed it with a stock V64 bios. It runs HBM @ 1050mhz & without touching anything else boosts up to 1720mhz with a power consumption of 250w max. Under heavy load in some games it will drop to about 1650mhz but in less demanding games the high boost clock can make it unstable so I use Afterburner to constrain the max clocks. The original V56's could in many cases run the HBM at 1100mhz although that wasn't the case with mine. Temps are usually 38-42°c max rising close to 50 on a hot summers day (UK) I bought this card at launch at a discounted price for slightly less than the cheapest GTX1070.
@@AncientGameplays often the case if you go one below top tier with AMD, sometimes they make it too easy like the 6950 I had many years ago. A bios flash was all that was needed to enable the shaders that had been disabled turning it into a 6970 🙂
Excellent Guide and thanks. Having updated my graphics card to latest drivers, it deleted my Overclock Settings that I did when I first got the card. I have managed to do 1650 and 950 on the memory (Futuremark said I had it last set at 1602,950) so a good boost to my score. 1662 was failing the benchmark, but happy to drop to 1650. My 1080p gaming continues until I'm forced to upgrade. Brings great value to this card. Thanks 👍
Using HW Monitor I see this now boosts to just over 1700 which is crazy. I did notice whilst Borderlands 3 was on pause it did have a couple of complete drop outs. Power/fans/GPU speed etc. Unsure if a blip with the game or it throttling itself. I will continue to test. However having BL4 on the setting above Ultra at 1080p I get 55-80fps which is brilliant
I snagged a V56 cheap and this video is awesome. I liked the part in the video where you apologized for your English. Sir, your English is better than a lot of people who live in my country. Thanks! Great Video! I really appreciate it!
Ancient Gameplays yeah watching all your videos regarding Vega 56. I’m still experiencing sudden crashes so don’t know what would be the most stable driver version. I’m using a Sapphire Pulse Vega 56
Still using this card and it will not change in the nearer future caus of the current situatian. BF 2042 runs on FHD and customized settings between 60-110 FPS. Thank you for the cont. support and updates
Update. Gpu frequency 1662 at 1070 voltage and memory frequency 890 at 950 volts. Power limit at -30 (180w) and temps are 65c on the gpu 70c on the memory and the gpu vram 79c soc vram 79c and mem vram 74c
First run with Zero RPM crashed system. Ran again with 1652 CC and 990 mV on RAM my OC fan profile and RAN 7337 GPU score in Time Spy. Had better luck with over clocking at 7579 GPU score . But thanks for showing me under-volting way. PS, Not sure why you told us to enable Zero RPM while under-volting. Spiked to 60* before crash. On my OC fan profile stayed at 46* without crash.
Tuned mine out to near the same settings at 1050mv and 1660mhz. Passed benches fine. Saw on HWM it was actually spiking past 1670mhz and locking up in games. So I dropped it to 1640mhz. Thing definitely tunes funny it's like it doesn't care what you tell it. Just goes lower voltage = higher frequency.
teşekkür ederim söylediklerini anlamasamda gördüklerim ile birlikte furmark score 7515 BEFORE and OC/UV AFTER 7950 SCORE Türkiyeden THANK YOU MAN rx 5700 xt > vega 56 > rtx 2070 THANK YOUU :)))
still using your settings script, (the latest, and the latest driver) on windows 11 now. It still works great, it only did not adjust the power limit, i had to do that manually.
Undervolting the card helped me get into a game that would crash my entire computer. Thanks for the guide. I downloaded the latest profile you made. Can I just hit the reset button on the side if I no longer want to use the profile and go back to default settings or is that not recommended to do?
Msi Afterburner have a graph like wattman, minus the memory timing and voltage control. It will appear as a tower bar graph on the left side of core clock.
I bought 6 of these back in 2018 and they all came with a $50 rebate. MSI ONLY HONORED 1 OF THE REBATES AND WHEN I CLLED TO ASK WHY THE ADITUDE WAS "WELL TOUGH" never buying MSI tech ever again.
Status 7 :1665 Mhz to 972 mV VRam Tuning: 940Mhz to 950 mV Power Tuning +50% (full)) fans u can do it by your own. i got on Furmark : 140FPS (min) and 141FPS (max) on 100% usage and max. 70*C on Resulution: 1920x1080 Vega 56 Pulse thank me later :)
Hiya ! I always come back to this video after a couple driver updates just to make sure I'm still setting a standard base for my Vega 56. But now it seems that no matter what driver I try I either end up with the software just cutting out with errors I don't understand or simply not overclocking the card at all anymore. As of 1.2.22 - what would you recommend as to the most stable driver for Vega users without sacrificing too many of the addons that Adrenalin provides? I appreciate you and your hard work!
@@AncientGameplays Thanks for the quick reply! Appreciate it! So - I went full DDU just to be sure (but the previous releases have been 'meh') - If I even say adjust the fan curve without anything else I will get a 'fail fast' error within 20 minutes, or for example about ten minutes ago was doing some gif desktop recording for my next video and the software just poofs out of existence then reappears with two icons in the system tray which then play hide and seek with my mouse cursor. I know that I'm on the backend of the curve with this one but I'd just be happy to have the Vega stable software wise at this point. I'm no hardcore gamer or renderer or anything but the further I go back to say when it rocked a Timespy run simply causes more issues than solving. Maybe it's time to flash to 64 or try modded drivers like you had talked about in a previous vid. Any suggestions would be great. Thanks so much!
Hello Fabio. Great you have updated this video as the Wattman changes with each update. Thank you for that. I use OverdriveNtool as Wattman resets everything back to default if i change anything. However i have problems with tuning my graphics card. I have MSI air blower with Samsung memory. I tried your settings here, but it causes blank screen and crash. When i look at overlay, the core clock wont go higher than 1500Mhz, even though i set 1662Mhz on P7. I tried to increase fan speed, VRAM is at 50% usage but GPU is at 99% usage. Does this mean my card can only do 1500Mhz max? To not crash my machine, i have to set voltage on 7 to 1090 instead of 1070 you have set. Temperature is 65C to 70C. Friend suggested use two dedicated power pins to the GPU, but this did not fix the issue. Thank you.
What are the temps of your hotspot with this settings ? :) mine going 90-92 degree on hotspot.. don´t know if this a little bit to high ? I`m using a Sapphire Pulse.. my HBM reaching 980 Mhz - It´s Samsung ^^ Great Video btw .. easy to understand and good explained :)
Hey man, hotspot temperatures are usually around 10-20C higher than the cores ones (depending on the card model). Anything below 100C on the hotspot will be fine :D
Thank you again! QUESTION: In Adrenalin 2020 if i set the state 6 as minimum and 7 as maximum it will be any better? Cuz in old tutorials many people say is better for stability.
oh really great video and explanation, i've just bought a vega 56 for 175€, is it a good price? i can't wait until it arrive to me, and i wanna try your guide. PS. my was the 1000 like of the video :P
Your profile overclock is perfect and stable for my RX VEGA 56,now if i want to change in GPU CLOCK P7 STATE AT 1670MHZ@1070Mv and MEMORY CLOCK P3 STATE AT 935MHZ@1000Mv Do you think will be stable?
Thank you SOOO much for this and the updated files / past files. I am getting a new motherboard + my first AMD cpu tomorrow [ Ryzen 5 2600 ] due to it having a %0 bottleneck with the vega 56 if both are ovverclocked to about the same degree [ the cpu needing %10 more to baseline it ]
What settings and timings should one use with a Vega 64 card? I have the Sapphire Radeon RX Vega64 8G HBM2 LE. I game and stream on the same PC so what would you recommend? Thank you in advance.
I am 49 years old. Always been a little bit of a computer nerd, but started doing PC builds, upgrading IMacs, tearing and rebuilding laptops about 2 years ago. I love it. Learning about overclocking tuning from your video makes me feel like a kid again. Thank you!
Thank you for watching instead. have a nice day, or night :D
tl;dw undervolt reference for vega 56:
Under Power Tuning, set Power Limit to the highest (i.e. 50%).
Under GPU tuning, set voltages to 800, 840, 880, 890, 900, 960, 1020, 1070.
Under VRAM tuning, set max voltage to 1000, and set max frequency to 920.
This is good settings if it is good i copy that to easy for me..
I updated my Adrenalin Driver yesterday and I tought "I'm gonna write to the Ancient Gamplays dude and ask if he can do an undervolting guide for this driver". You are our fuc**ng hero, bro!!
Great to know hahha
@@AncientGameplays is this a good thing to do if i have this graphics card ??
My man, if you are ever in my neck of the woods or if I'm ever in your neck of the woods, I owe you a pint. Using the Division 2 benchmark, I went from a 59 FPS average with a score of 5993 in the benchmark to a 86 FPS average and a score of 7680. I did go with a slight more conservative route with the state 7 at 1660 Mhz. I'm going to run the full benchmarks on it today as it was 4am when I finished last night. Again, you rock and keep up the good work!
Thanks man, i am glad it helped you!
Wow man you’re a genius!! I just upgraded my card and moved from nvidia to amd and got a Vega 56. I usually overclock in msi afterburner and I wasn’t comfortable with amd software. I tried overclocking my Vega 56 in msi afterburner and I didn’t get that much performance. I watched your video and loaded your profile and booom! Got so much more performance! Thank you bro! Keep up the good videos ❤️
You're welcome man :D
Bro I actually can't believe it. I was getting 190fps/139 average fps in Valorant and now its at 400 fps. You are a legend.
You had some serious bottleneck there i guess xD
If you flash Vega 64 VBIOS onto a Vega 56 GPU you can get a nice boost on memory overclocking. It won't make any difference to anything else since the core is cutdown but it's still very much worth it. You can get 1000Mhz or more on memory as it allows you to drive the memory controller to a higher voltage as well (Vega 64's memory controller voltage is 1100 by default).
So you inspired me to oc my 5700 flashed to an xt. I put an Arctic Accelero Extreme IV on it last night and it's crazy how cool the junction temps are! My case is an NR600, 3 120mm intakes on the front, 1 rear 120mm exhaust, and 1 120mm exhaust on top.
Air Cooling ftw!
GREAT! I also prefer aircooling over watercooling
Nice one,Thx!
I'm still working on my settings since 2018. Definitely better then the stuff you can choose in the Adrenaline Driver. My sweet spot is about 1450mhz GPU and 925mhz Vram. Less then 950mV on my UV setting so far. Power consumption is about 170W.
seems good to me but you're missing some performance there
Hey bro, im forigner too, i have a moderate english, and your pronunciation is very clear to my understand, much better than natives peoples, with so many abbreviations.
Nossa, lendo os comentários, vi que você também fala português, bem, saudações do Brasil ;)
Damn I'm literally picking up my Vega 56 on Tuesday, thanks for the vid!
You're welcome mate :D
@@AncientGameplays my Samsung HMB2 reaches 980 MHZ, we'll see how much I'll be able to optimize it!
@@emymagkuchen you lucky bastard haham. Select timing level 2 also
@@AncientGameplays It works a bit, but I feel like my power consumption isn't really any better.... According to HWinfo or GPUZ it stays at 221W or even 330+W with +50% power limit even though I'm undervolting. I want to find the sweet spot between boosting performance and lowering consumption but lowering the voltage doesn't seem to make any difference. Any advice maybe, you cheeky bugger?
@@emymagkuchen That is not how it works xD
220W is already with the %50 power. Like i said in the video "It doesn't mean that the card will use more power, it means that the card will use it if needed". And 220W with those settings is great
One of the better guides for this underrated card. Hope many would not blindly follow this guide and expect things just work smoothly. All cards are different and components will degrade over time.
Well, i wouldn't say degrade, but all electronics fail at one time, like people. Degrading is another thing :D
thank you so much for sharing your profile! Mi gpu really improve a lot, almost a 30%
Cheers for this! Just got an ex mining Vega 56 recently, works fine but enjoy watching videos
I highly approve of your desktop wallpaper
KHR. Vongola primo
Your VIdeo is a blessing, just recently came into posession of a Sapphire Pulse Vega 56, Hynix memory but thanks to your profile tweaks I am now rocking her at 1662/950MHz with the GPU going in furmarks burn-in up to 1650MHz, rock solid not too hot at 220W.
Needless to say it really boosted the performance by a lot, must be by now 50% faster than my old RX 580 8GB.
Great to hear, thanks :D
I have same card too. Set mine to 1650 and 950. Couldn't quite reach 1662 in Futuremark. Great cards aren't they. Makes you smile knowing you are getting a bit extra for your cash too 😁
Wow I get only 1550 no matter what voltage
@@RobotischeHilfe What card do you have and have you set the settings as used in the video?
I will check mine and post exactly what I have, but the base is the same as this video.
Using HW Monitor it boosts to just over 1700 at times, which is crazy
@@markymoo22 I managed to get 1610 but with 260w power draw which is way to high. would be cool if you send your thanks
Cocorico l'ami, merci pour la qualité de ta chaîne ! Vraiment cool de voir un contenu simple et en même temps pro :D
Merci beaucoup mon ami, j'ai plus de vidéos que vous aimerez. Accédez à ma section vidéo pour voir
Another great video!
Just wanted to get back on my last comments.. Had problems over problems.. End of the thing was a hardware defect! But a day later my rx 5700 xt came so the 580 went back and I get my money back so I can get the 3600.. Got really, lucky
Thanks for the support
Thanks for always being here too
thanks for adding the profile for 20.9.2 really appreciate it man!
You are welcome
Btw, man... Don't worry about the language barrier, it's actually pretty cool that you add the "flops" in the videos, makes it funny. ;)
Amazing guide. Downloaded the xml file made it super easy. Easily added 10-20 fps in Modern Warfare with the settings I had. Thank you, Fabio!
Thank you for watching:D
Amazing, I just saw the video and that is what I am aiming for. How many fps are you running on warzone on what settings?
I have just bought a Vega 64 for £85 which is a cracking deal in the UK! really looking forward to testing it out. Won't touch my 3090 but for the price:perf this is the best card I've ever got.
what a nice deal my man! It is around the RX 5600XT when tweaked
@@AncientGameplays agree mate! - will be watching your video on undervolting Vega 56. I've got the reference model so undervolt is key for me to keep temps/noise down. I'm guessing not much has changed from your video to now? :)
You guys wanted a REMAKE for this video so here it is! Now SMASH that LIKE BUTTON and share it with your friends and communities to help this video go to trending :D
P.S. Sorry if i rushed some steps like the fact that vega cards come way overvolted and that you shall try to increase frequency or decrease voltage 10Mhz or 10Mv at the time in order to get the maximum frequency for that voltage, or to get the lowest possible voltage for that frequency. Like i said, VEGA cards are funny to tune and these were the "sweet spot settings" i found.
Trap Town NCS is a bot
This thing is ont the comment section of the channel of mi sister and she have only 250 subs
how much is the diffrence in fps
lol, time to delete xD
@@AncientGameplays what does that mean ???
I just picked up a used Vega 56 for my living room PC, this tutorial was great! 👍 Thanks for your help!
You're very welcome
I would love to see one of these tutorials for the RX 5700XT with the 2020 drivers. Good video BTW 👍
Will be made as soon as possible :D
@@AncientGameplays Great to hear! May I add a bit on constructive criticism? I think it will add to the tutorial if you show a before and after test in a few games to work out the performance benefit you would gain with the OC as well as the draw backs such as temperature and fan speed differences. I really appreciate your videos so please don't take my feedback as an insult. I look forward to the next video, Thanks again for the clear and informative videos. 👌
Thanks, i will so that mate
This video really helped me with a Vega 56 nano, which is noisy AF so much so it was almost unusable even with headphones.
Great to hear!
Helpful video, thanks. Can’t quite hit your OC though. 1625mhz/1070mv 820mhz/1000mv (Hynix RAM). Power draw dropped 30watts and temps down ~5’c.
That seems great to me tho :D
Very good explanation and don't worry about your English mate, even when tired you have an impeccable English. Thanks for your work :)
Thanks a lot for the words man :D
thx again m8 for always having uptodate profile!!! ur the best!
No problem man :D
Just got my Vega 56 and been watching a ton of your videos. Some great stuff man!
I just put this in my favorites for now. This helped sooo much! Thank you!
Thanks for watching :D
Do you still use your rx radeon 56 gpu with these overclocked settings. Does it still work
@@tebaFN I used them until ~3 months ago and they worked fine.
Outstanding sir! Been trying to stabilize an 8 GPU mining rig running Neoscrypt and it was not performing well. This got me on the right track.
Great to hear
Just subscribed and thank you for all your help, now I going overclock my Red Dragon Vega 56 see what I can get out of it.
Great :D
Thank you for the link. I acquired my vega 56 today, but i see this video like 2 months ago. Tegards from Argentina!
You're welcome :D
Thanks Man your link got me 30 plus FPS
Subbed :D
Great hahah
Have not benched a whole lot but so far in Division 2 I saw a 15 frame increase at ultra detail using your settings. I have the Power color Red Dragon version of Vega 56.
Great :D
És o maior, caralho. Volta e meio venho aqui para ver se ainda tens actualizado os profiles para um gajo carregar e não tens falhado. Por acaso também tenho a versão sapphire da vega, por isso é só copy/paste e tá a andar. Continua que tás no bom caminho !
Obrigado. Abraço!
Best explanation's for all settings very thorough! Bro your English is better than most American's lol. Thank you by the way!
Thanks man! I improved it a lot so far :D
First of all, thank you for the video. Everything was explained perfectly understandable^^
my question concerns the fan tuning. Why didnt you touch that and why would you leave 0rpm mode on? I was thinking that it has to do with power usage but im new to this subject.
would love for an answer.
Keep up the good work!
Did you find an answer to this question?
0 rpm is nice because when there is no load on the card, the fans dont need to spin because it doesnt get very hot. It just helps with keeping your computer quiet when your not doing gpu heavy tasks, like watching youtube etc.
I got my sapphire nitro+ rx vega 64 undervolted/overclocked to 1715mhz core @ 1065mV and 1120mhz memory @ 951mV @ +50% power on air @ 100% fan speed for gaming purposes all stable. While gaming the core is actually 1650mhz average. This gained me 8-15 more FPS @ 4K in all my games. The hottest I’ve seen it get is 70c and I play in 4K max settings 60FPS. Average power consumption is around 300W.
8-15FPS at 4K is A LOT. But 100% fan? Damn, my ears would explode xD
Ancient Gameplays I always use my headphones there have really good noice cancelation so it’s a win-win for me.
You’re a beast, thanks for this video man
Thanks for watching hehe
You have the very best OC vids on you tube. Well Done and thanks!
Thank you for watching :D
I bought my friend a vega 56 a bit over a year ago and if I remember correctly it could do 1700Mhz with 20mV undervolt but it ran optimally at 1590-1650Mhz with 50mV undervolt. I cant remember more details but I think it did 950Mhz on the memory but anything over that and games started glitching like I have never seen. Atleast witcher 3 did, the character started teleportin etc.
I ran it in a open bench but the 1700Mhz overclock was not stable in my friends case
1600-1650Mhz seems to be the ideal scenario
Just picked up a XFX Vega 56 blower style, first thing i did was take stock benchmarks then took it completely apart lol. Took off what little dust there was and put liquid metal, cut out the bracket so let air flow out much better and unplugged the LED's lol. Stock clocks where ~1280-1360 in some benchmarks and ~1320-1380 in others, without any changes in software or overclocking/undervolting it jumped to ~1420-1520. Now I'm going to try your recommend settings and see where it goes
Windowed 1080p maxed FFXV windows benchmark loop
- 4900 stock (82c, 2600rpm)
- 5280 Liquid metal and opened bracket (84c, 2400rpm)
- 5700 +30% power ~1580(1640)/1.07v 920/1v (74c 2300 rpm)
- Adjusted fans to level out at 2020rpms at 80c, ~1560MHz and 5660 score. Think ill leave it there ;-)
*i averaged out of 2 or 3 runs
Now to loop other benchmarks and stress tests to ensure stability :/ lol
Nice results man
I didn't even knew you before, but since the vid started I thought to myself "This guy sounds portuguese as fuck despite speaking perfect english" and then that zero followed by pimbalhada and SIIIII xD
Hahahaha. Um abraço
Latest adrenalin software messed up the settings you gave here. I'm back. Thanks dude.
980Mhz Hynix memory over here! :D
You lucky bastard haha
@@AncientGameplays The worse thing is that it is a "refurbished" GPU they actually returned because it's Hynix. It even smelled like new when I opened it lol.
260€, May 2019 (Spain).
At the moment core running at 1600, undervolt and auto fans (quite silent and still performing great without having to change the power limit!)
@@xavalintm great results indeed
They must be using cheap HBM compared to the reference models at launch, I was disappointed when mine was unstable above 1070mhz when other people could hit 1100mhz. I dropped it back to 1050mhz to be safe.
@@Kestrel626 That's actually with Samsung memory and Vega 64 Bios, we are talking about 100% stock Vega 56 (with Hynix, as I said)
Buen video bro, hay muy pocos haciendo under y over al vega 56 pero sin dudas este video es el mejor! Saludos desde Argentina!!
Saludos de portugal!
Hola bro no entiendo muy bien todo este tema, ¿podrias indicarme como hacerle overclock a esta misma tarjeta? Simplemente copio lo que hizo el en el video? Un saludo, gracias!
Can you do a video like this for Rx 5700xt
Already done, i will remake it soon
@@AncientGameplays waiting for this 😁 i have 5700xt card
If you're keen for performance definitely consider a Vega64 bios flash too, pre flash I couldn't get ram beyond 950-960, after the flash, the ram was stable at 1100 mhz all day
True, but you cannot do it unless you have samsung VRAM
Boas Fábio, gostaria de perguntar algo se me conseguires explicar. Já que a memory voltage não é o controlo da voltagem da memória hbm2 mas sim a voltagem base da placa, porquê aumentar de 950 V para 1v? Desculpa ai e continua o bom trabalho.
é a voltagem do Controlador de memória, que por sua vez vai ser a base. Sendo que estamos a aumentar frequência podemos aumentar também a voltagem do controlador de memória
thanks for the video, just ordered a vega 56, hopefully will arrive by monday. will be using your overclock profile. 👍👍
Great!
@@AncientGameplays I used your profile and it wont even load Borderlands 3. It locks up at the optimizing shaders screen. Its an MSI air boost with aggressive fan curve.
How much consume vega 56 with these settings?
200-220W, watch my VEGA 56 vs GTX 1660 Super video :D
Man I miss the Vega56 (sold mine after getting the 5700XT) wattman layout, I liked it way more than the Silly Navi curve, good video as usual.
Well, you can still input with stages, but you only have 3 now xD
I don't understand. Why would you miss an older generation card if you're upgraded to a better card?
If you have Hynix memory I feel sorry for you, really :(
Also if u're using MSI afterburner click on settings and uncheck the "Erase autosaved startup settings" else every time you restart your PC the wattman settings will reset, that alone gave me enough headaches till i figured it out
P.S: Touching the TRUE memory voltage is a big nono cause even 5mv more will burn your card
Yeah, already did that, but great tip to others :D
As for the P.S line, Yeah, that is completely true
Btw is that Samsung HBM?
Thx for keeping your settings updated
You're welcome :D
I've heard that Radeon boost is recommended to be turned off for FPS gamings. Does anybody know if this is true?
You don't want radeon boost. It is a blurry mess, just like DLSS
aside from undervolting etc i had always best performance with all radeon extras deactivated...
Great Video Man! I just purchased a slightly used Sapphire Nitro+ RX Vega 56 Limited Edition for $175. I still haven't used it because I'm needing a PSU upgrade sooner. Hope this video can help me later. :D
Great price man :D
Thank you!
You're welcome mate. All i ask you is to hit that like and share the video :D
I bought a Vega 56 at launch & have it running in a custom water loop. I flashed it with a stock V64 bios. It runs HBM @ 1050mhz & without touching anything else boosts up to 1720mhz with a power consumption of 250w max. Under heavy load in some games it will drop to about 1650mhz but in less demanding games the high boost clock can make it unstable so I use Afterburner to constrain the max clocks. The original V56's could in many cases run the HBM at 1100mhz although that wasn't the case with mine. Temps are usually 38-42°c max rising close to 50 on a hot summers day (UK)
I bought this card at launch at a discounted price for slightly less than the cheapest GTX1070.
VEGA cards have a really good potential indeed
@@AncientGameplays often the case if you go one below top tier with AMD, sometimes they make it too easy like the 6950 I had many years ago. A bios flash was all that was needed to enable the shaders that had been disabled turning it into a 6970 🙂
@@Kestrel626 Yeap, the same happened to 7850 and 7870 xD
And RX 480 4Gb actually having 8GB xD
First e like!!
Excellent Guide and thanks.
Having updated my graphics card to latest drivers, it deleted my Overclock Settings that I did when I first got the card.
I have managed to do 1650 and 950 on the memory (Futuremark said I had it last set at 1602,950) so a good boost to my score.
1662 was failing the benchmark, but happy to drop to 1650. My 1080p gaming continues until I'm forced to upgrade.
Brings great value to this card. Thanks 👍
Using HW Monitor I see this now boosts to just over 1700 which is crazy.
I did notice whilst Borderlands 3 was on pause it did have a couple of complete drop outs. Power/fans/GPU speed etc.
Unsure if a blip with the game or it throttling itself.
I will continue to test.
However having BL4 on the setting above Ultra at 1080p I get 55-80fps which is brilliant
I snagged a V56 cheap and this video is awesome. I liked the part in the video where you apologized for your English. Sir, your English is better than a lot of people who live in my country. Thanks! Great Video! I really appreciate it!
Thanks a lot for the words. Enjoy!
Thanks Buddy, gaining 5 FPS average across the board over stock settings with ROG Strix Vega 56
Nice, and less temps and noise i hope
First thing I want to thank you for doing all this it's really great im new to red team since my last 2 GPU were Nvidia.
Hope you enjoy my channel's content
@@AncientGameplays I really do but I didn't get any good result for now with the undervolt overclock it crashes I guess I have to find the sweet spot.
Your English is fine. Thanks for the video.
Thank you for this tutorial. appreciate the saved settings. keep up the videos you just earned sub!
Thanks, i recommend you some other videos from my channel :D
Ancient Gameplays yeah watching all your videos regarding Vega 56. I’m still experiencing sudden crashes so don’t know what would be the most stable driver version. I’m using a Sapphire Pulse Vega 56
Still using this card and it will not change in the nearer future caus of the current situatian. BF 2042 runs on FHD and customized settings between 60-110 FPS. Thank you for the cont. support and updates
Thank you for watching :D
Лучше этого парниши никто адервольтинг не сделал, отличная работа
20% прироста, даже в 64 шить не надо
Hello to you from Russia, and thank you very much for this video!
I just got my vega 56 and using your profile. I have hynix memory. I managed to get 900 on the memory and 1645 on the gpu.
Good, nice results
Ancient Gameplays I've been playing around with the power consumption and voltage and manage to get stock numbers at 180w. What are good vram temps?
Update. Gpu frequency 1662 at 1070 voltage and memory frequency 890 at 950 volts. Power limit at -30 (180w) and temps are 65c on the gpu 70c on the memory and the gpu vram 79c soc vram 79c and mem vram 74c
Nice video! Big thanks!
I got 2 questions:
1. Is a Ryzen 5 1600 a bottleneck for the vega 56? (1440p)
2. You don't need to adjust the fan curve?
First run with Zero RPM crashed system. Ran again with 1652 CC and 990 mV on RAM my OC fan profile and RAN 7337 GPU score in Time Spy. Had better luck with over clocking at 7579 GPU score . But thanks for showing me under-volting way. PS, Not sure why you told us to enable Zero RPM while under-volting. Spiked to 60* before crash. On my OC fan profile stayed at 46* without crash.
Well, 60C is nothing and should never make it crash. Voltage does that (or the need of it)
Thank you for the great video and for the links with the settings. You are a legend! :D
Tuned mine out to near the same settings at 1050mv and 1660mhz. Passed benches fine. Saw on HWM it was actually spiking past 1670mhz and locking up in games. So I dropped it to 1640mhz.
Thing definitely tunes funny it's like it doesn't care what you tell it. Just goes lower voltage = higher frequency.
Sos un crack bro, la mejor explicación de como hacer undervolt y overclock a la vega 56, saludos desde Argentina!
Thanks man!
lo copiaste todo tal cual y te funciona mejor y a menor temperatura??
Nice tutorial! Do you have any profile for a saphirre rx vega64?
Very Nice Settings! Trank you! 15 degrees lower and less Power consumption+ More mhz and fps ❤️
You're welcome :D
Ancient Gameplays maybe you have settings for an Rx590 Sapphire?🤓
@@danielw.1029 i have for rx 580 :D
Ancient Gameplays okay thx
teşekkür ederim söylediklerini anlamasamda gördüklerim ile birlikte furmark score 7515 BEFORE and OC/UV AFTER 7950 SCORE Türkiyeden THANK YOU MAN rx 5700 xt > vega 56 > rtx 2070 THANK YOUU :)))
which driver would be the best in terms of overclocking and undervolting ?
still using your settings script, (the latest, and the latest driver) on windows 11 now.
It still works great, it only did not adjust the power limit, i had to do that manually.
And you did well my friend
Thank you for adding the settings for the latest 20.09.1 update, much appreciated bro!
You're welcome
Undervolting the card helped me get into a game that would crash my entire computer. Thanks for the guide. I downloaded the latest profile you made. Can I just hit the reset button on the side if I no longer want to use the profile and go back to default settings or is that not recommended to do?
Well, you can, but these settings are actually a great overall for performance, temps and noise
Msi Afterburner have a graph like wattman, minus the memory timing and voltage control. It will appear as a tower bar graph on the left side of core clock.
This video really helped me and my nephew out! Thnx sooooo much
I am happy to know that man! Big hug!
I bought 6 of these back in 2018 and they all came with a $50 rebate. MSI ONLY HONORED 1 OF THE REBATES AND WHEN I CLLED TO ASK WHY THE ADITUDE WAS "WELL TOUGH" never buying MSI tech ever again.
Status 7 :1665 Mhz to 972 mV
VRam Tuning: 940Mhz to 950 mV
Power Tuning +50% (full))
fans u can do it by your own.
i got on Furmark : 140FPS (min) and 141FPS (max) on 100% usage and max. 70*C
on Resulution: 1920x1080
Vega 56 Pulse
thank me later :)
Hiya ! I always come back to this video after a couple driver updates just to make sure I'm still setting a standard base for my Vega 56. But now it seems that no matter what driver I try I either end up with the software just cutting out with errors I don't understand or simply not overclocking the card at all anymore.
As of 1.2.22 - what would you recommend as to the most stable driver for Vega users without sacrificing too many of the addons that Adrenalin provides?
I appreciate you and your hard work!
Hey man, these settings should be working fine. It is strange
@@AncientGameplays Thanks for the quick reply! Appreciate it! So - I went full DDU just to be sure (but the previous releases have been 'meh') - If I even say adjust the fan curve without anything else I will get a 'fail fast' error within 20 minutes, or for example about ten minutes ago was doing some gif desktop recording for my next video and the software just poofs out of existence then reappears with two icons in the system tray which then play hide and seek with my mouse cursor.
I know that I'm on the backend of the curve with this one but I'd just be happy to have the Vega stable software wise at this point. I'm no hardcore gamer or renderer or anything but the further I go back to say when it rocked a Timespy run simply causes more issues than solving. Maybe it's time to flash to 64 or try modded drivers like you had talked about in a previous vid.
Any suggestions would be great. Thanks so much!
Hello Fabio. Great you have updated this video as the Wattman changes with each update. Thank you for that. I use OverdriveNtool as Wattman resets everything back to default if i change anything.
However i have problems with tuning my graphics card. I have MSI air blower with Samsung memory. I tried your settings here, but it causes blank screen and crash.
When i look at overlay, the core clock wont go higher than 1500Mhz, even though i set 1662Mhz on P7. I tried to increase fan speed, VRAM is at 50% usage but GPU is at 99% usage.
Does this mean my card can only do 1500Mhz max? To not crash my machine, i have to set voltage on 7 to 1090 instead of 1070 you have set. Temperature is 65C to 70C.
Friend suggested use two dedicated power pins to the GPU, but this did not fix the issue. Thank you.
Well, i think it is somehow power limited on its bios due to being blower type
Thanks for the video! What is the performance like with these drivers in comparison to older ones (before Adrenalin 2020)?
More or less the same actually
Very clear guide! Thanks!!!
You're welcome :D
What are the temps of your hotspot with this settings ? :) mine going 90-92 degree on hotspot.. don´t know if this a little bit to high ? I`m using a Sapphire Pulse.. my HBM reaching 980 Mhz - It´s Samsung ^^
Great Video btw .. easy to understand and good explained :)
Hey man, hotspot temperatures are usually around 10-20C higher than the cores ones (depending on the card model). Anything below 100C on the hotspot will be fine :D
@@AncientGameplays thank you :) .. keep up the great work
from vietnam thanks for your setting to OC , i get more Fps for warzone (added 15 ~ 24 FPs ) thanks u so much
Great!
Thank you again! QUESTION: In Adrenalin 2020 if i set the state 6 as minimum and 7 as maximum it will be any better? Cuz in old tutorials many people say is better for stability.
Well, that is due to the frequency Drops, but it wont make a difference
oh really great video and explanation, i've just bought a vega 56 for 175€, is it a good price? i can't wait until it arrive to me, and i wanna try your guide. PS. my was the 1000 like of the video :P
Thanks for watching and for the like. It was a good deal if it is a good model
Your profile overclock is perfect and stable for my RX VEGA 56,now if i want to change in GPU CLOCK P7 STATE AT 1670MHZ@1070Mv and MEMORY CLOCK P3 STATE AT 935MHZ@1000Mv Do you think will be stable?
You need to try it for yourself, all cards are a bit different
just in time. Thanks bro! :)
Np man :D
Thank you SOOO much for this and the updated files / past files.
I am getting a new motherboard + my first AMD cpu tomorrow [ Ryzen 5 2600 ] due to it having a %0 bottleneck with the vega 56 if both are ovverclocked to about the same degree [ the cpu needing %10 more to baseline it ]
Yes and no, you can«t simply measure bottleneck that way. There are a LOT of variable, but yeah, it is a good combo :D
Great video and good explaining so I want ask you..
Can you tell me what I should set of I want overclock my RX590?
Thanks, for that you should into my RX 580 one :D
@@AncientGameplays ok I try it thanks
What settings and timings should one use with a Vega 64 card? I have the Sapphire Radeon RX Vega64 8G HBM2 LE. I game and stream on the same PC so what would you recommend? Thank you in advance.