3:24 I love the aesthetics of industrial engineering from this era, whether it was a loco cab, power station control panel, recording studio mixing desk or whatever... everything was always hand-painted in some shade of teal/olive/beige. Round gauges, embossed labels, metal, wood, glass... and no plastic in sight!
Great video,very interesting.Thanks for sharing.I did a painting of these locomotives.As an avid train enthusiast in the mid eighties had to travel to Crewe to see these locomotives.Brilliant thrill when i spotted my first one of these at Crewe. Great memories.Thanks again for sharing very imformative kindest regards...
I remember the 33's when I was a kid they used to thunder past my home in Poole on the London to Weymouth line back in the 70's love this loco great video
Indeed, your right. When i look at all the shit we have here now, makes me realise just how good these were! I must have had a trip behind every 33/1 up Parkstone bank 3 times over when I was a young spotter back in the late 70's. Seems like a whole lifetime away now but in away, i spose it is LOL.
Back in 1972 I was working for Penn Central working a switcher at Palmer, Massachusetts using an ALCO RS-2. We were still using the crew room in the single stall brick engine house, one of only two Boston and Albany railroad engine houses left and the only one that was still in use. Unlocked the locker room turned on the coffee maker and wondered why it was so quiet......then realized the engine which was outside was shut down. In mid February! It was 5 degrees below zero that morning. At that time we didn't use antifreeze in the cooling systems. Climbed into the cab to discover the kids had been at play and shut her down. Engine water temperature was7 degrees F. Checked the water sight glass and was surprised it still was full as it was equipped with a dump valve if the coolant got to cold. Back in the cab and as the fuel pump was still running ( solinoid had burned out so the electrician used a block of wood to hold the relay closed to keep the engine running as a new one wasn't available. Closed all the switches, rotated the engine control switch to the start position then grabbed the start switch which is a one inch by 1/2 inch lump of stainless steel and rotated it to the start position where it came to compression on the first cylinder and stalled. Did this 4 times then finally said ok burn out the starter fuse, see if I care. After about 8 seconds it went through compression and very slowly went burgh, burgh, burgh, then to my great relief started V12 244G series engine and I t yanked god the governor move red the fuel rack into start position as soon as you hit the starter then with the low oil alarm bell ringing waited for the oil pressure to reach 20 pounds at which point the alarm shut off. It used a 10 kilowatt auxiliary generator for charging the batteries and powering the low voltage electric's. This engine had two options a low voltage voltmeter and an amp meter. I after I released the starter switch heard both contactors drop out which allowed the auxiliary contactor to close. Normally the engine would roll slightly at idle but this time the volt meter buried itself at over 300 amps as far as the meter would go and the engine dropped to a dead smooth idle. Checked the water tank and all was well turned the cab heater on closed all the windows and back in the locker room waiting for my crew. My engineer complained what happened to the heat? I told him what happened. His reaction was oh, ok soon as we tie onto the interchange drag it will warm up fast. 117 freight cars up a 1/2 percent grade to the entrance to the yard where we would run around 12 cars ( that's all we could run around ) switch them out until the interchange was done. At just a mile and a half from the interchange she warmed up quick having to use full throttle to get the interchange to the yards entrance. It wasn't till just past one pm that the amp meter finally came off the 300 amp mark indicating the batteries were just about fully charged. Engine was rated at 1500 horsepower. I miss the old days. Sigh! Cheers
Good video of these classic locos and wonderful engine idle sound. Not sure a screwdriver was ever part of the BRCW or BR driver manual, lol! Surely there is a master key for the loco somewhere, or get a copy?
LOL no carriage key or cab key then! Hmmm I spy a WESTERN hiding there, Prince or Lady?? D104?......where is this please? LOVE the sound of big diesels!
No it wouldn't be a T key or carriage key (which are the railway names for what you describe) at all. It would be a driver's master key (known in the former southern region as an EP key)
That compressor sounds like the same ones the class 1700 (or 1800, I always forget) electric loco's have on board... The same deafening 'scream' was most likely to be emitted from the sides just after coming to a stop on a station...
When he plays with the horn you hear the spoil sport driver tell him to 'grow up'....doesn't he realise that trains are a big boys toy and if I was there, I'd sound the horn too....followed by a cheeky flick of the V's :)
I think you are right there dpfilms as the horn is part of the startup test and a loco can't be moved without operating horns I seem to remember but there are long held strict rules about frivolous whistles and horns in built up areas especially as no one wants a load of horns going off at 4am lol.
It's only the lock that stops the reverser, the lever he moves, from moving which in turn stops the power handle moving. It essentially locks the desk up
Electrostars have a piece of wood in their cab (shaped like a hockey stick crossed with a paddle) which is used during manual coupling of units so this might be something similar? Or perhaps it's to discourage train robbers! ;)
The 'change end switch' and 'max speed' writing seems to be in a different font to most BR locos, and I have seen a lot of 33's with the same text font. Can anyone explain why this is, or is it just one of those BR things?
yes... lol frustrating to see how railway worker film... missing all the interesting details... like: show the gauges!!! not a finger pressing the start button!..lol if it is not asking too much !! thanks for sharing anyway.
Didn’t seem very happy to be showing him did he ? Opening the desk with a screwdriver (which is terrible) then throwing it down. And the “grow up” when he blew the horn was just rude. If you don’t like your job, get a new one I would of said to him
Oh, dear - opening the desk with a screwdriver would rightly be a Form 1 offence; most un-professional so why not just do it right? There's never a Traction Inspector lurking when you want one.
You are way too close to show the subject, this is pretty bad video work on what promises to be an interesting subject, hope you improve greatly in future, for now you have my sympathy!!!!
Sweet sounding engines those straight eights on the 33s
1950s engineering right there. looks like there is a post office class 33 there also, is the class 33 still in use today?
3:24 I love the aesthetics of industrial engineering from this era, whether it was a loco cab, power station control panel, recording studio mixing desk or whatever... everything was always hand-painted in some shade of teal/olive/beige. Round gauges, embossed labels, metal, wood, glass... and no plastic in sight!
Great video,very interesting.Thanks for sharing.I did a painting of these locomotives.As an avid train enthusiast in the mid eighties had to travel to Crewe to see these locomotives.Brilliant thrill when i spotted my first one of these at Crewe. Great memories.Thanks again for sharing very imformative kindest regards...
I remember the 33's when I was a kid they used to thunder past my home in Poole on the London to Weymouth line back in the 70's love this loco great video
Surprised you havnt got a 'Master Key' . But if a flat blade works, why not . 👍
Nice vid . Thanks for sharing.
Indeed, your right. When i look at all the shit we have here now, makes me realise just how good these were! I must have had a trip behind every 33/1 up Parkstone bank 3 times over when I was a young spotter back in the late 70's. Seems like a whole lifetime away now but in away, i spose it is LOL.
Back in 1972 I was working for Penn Central working a switcher at Palmer, Massachusetts using an ALCO RS-2. We were still using the crew room in the single stall brick engine house, one of only two Boston and Albany railroad engine houses left and the only one that was still in use. Unlocked the locker room turned on the coffee maker and wondered why it was so quiet......then realized the engine which was outside was shut down. In mid February! It was 5 degrees below zero that morning. At that time we didn't use antifreeze in the cooling systems. Climbed into the cab to discover the kids had been at play and shut her down. Engine water temperature was7 degrees F. Checked the water sight glass and was surprised it still was full as it was equipped with a dump valve if the coolant got to cold. Back in the cab and as the fuel pump was still running ( solinoid had burned out so the electrician used a block of wood to hold the relay closed to keep the engine running as a new one wasn't available. Closed all the switches, rotated the engine control switch to the start position then grabbed the start switch which is a one inch by 1/2 inch lump of stainless steel and rotated it to the start position where it came to compression on the first cylinder and stalled. Did this 4 times then finally said ok burn out the starter fuse, see if I care. After about 8 seconds it went through compression and very slowly went burgh, burgh, burgh, then to my great relief started V12 244G series engine and I t yanked god the governor move red the fuel rack into start position as soon as you hit the starter then with the low oil alarm bell ringing waited for the oil pressure to reach 20 pounds at which point the alarm shut off. It used a 10 kilowatt auxiliary generator for charging the batteries and powering the low voltage electric's. This engine had two options a low voltage voltmeter and an amp meter. I after I released the starter switch heard both contactors drop out which allowed the auxiliary contactor to close. Normally the engine would roll slightly at idle but this time the volt meter buried itself at over 300 amps as far as the meter would go and the engine dropped to a dead smooth idle. Checked the water tank and all was well turned the cab heater on closed all the windows and back in the locker room waiting for my crew. My engineer complained what happened to the heat? I told him what happened. His reaction was oh, ok soon as we tie onto the interchange drag it will warm up fast. 117 freight cars up a 1/2 percent grade to the entrance to the yard where we would run around 12 cars ( that's all we could run around ) switch them out until the interchange was done. At just a mile and a half from the interchange she warmed up quick having to use full throttle to get the interchange to the yards entrance.
It wasn't till just past one pm that the amp meter finally came off the 300 amp mark indicating the batteries were just about fully charged. Engine was rated at 1500 horsepower.
I miss the old days. Sigh!
Cheers
very cool start up, and also interresting classic train
shows that older things last for ever a true work horse
nice bit of walnut on the dashboard.
Good video of these classic locos and wonderful engine idle sound. Not sure a screwdriver was ever part of the BRCW or BR driver manual, lol! Surely there is a master key for the loco somewhere, or get a copy?
Great capture mate, great work! Cheers, Jack
Thank you so much for recording this video
Coz I've been looking for kind of videos like that ..
Thank you ...
LOL no carriage key or cab key then! Hmmm I spy a WESTERN hiding there, Prince or Lady?? D104?......where is this please? LOVE the sound of big diesels!
1048 Lady.
it seems rare to fing an in cab train start up. good work
Love the key
Is a screwdriver normally used to unlock that lever? or would the driver be provided some kind of master key device?
He'd probably have a railway square key. It's just a bit of metal with a square end, so a flat screwdriver will fit just fine.
No it wouldn't be a T key or carriage key (which are the railway names for what you describe) at all. It would be a driver's master key (known in the former southern region as an EP key)
@@cjmillsnun it's a Master,, and I've got one. It was my dads. 😁👍
The only engine in Britain that has right sided controls.
Lova Sound Start :)
That compressor sounds like the same ones the class 1700 (or 1800, I always forget) electric loco's have on board... The same deafening 'scream' was most likely to be emitted from the sides just after coming to a stop on a station...
Are the earliest ones Ruston Hornsby hit and miss engines ?
Glad to find a kraftwerk fan that likes trains!
Great video.
I so want one! Great Film, Thanks
i like how you start it with a large screw driver like a car thief in the 1980s
That's part of their charm
The designers of the cab above are sure safe from any accusations of finesse or over-elegant engineering.
British technology at its best
When he plays with the horn you hear the spoil sport driver tell him to 'grow up'....doesn't he realise that trains are a big boys toy and if I was there, I'd sound the horn too....followed by a cheeky flick of the V's :)
He may have said "Blow Up" the word railwayman use to take the brake off
I think you are right there dpfilms as the horn is part of the startup test and a loco can't be moved without operating horns I seem to remember but there are long held strict rules about frivolous whistles and horns in built up areas especially as no one wants a load of horns going off at 4am lol.
@@mrdavros100 He said "Grow up man".
I think he meant (grow up) in a funny/joke way
A Screwdiver for ignition and start ? Or is it simply a Security Lock ?
It's only the lock that stops the reverser, the lever he moves, from moving which in turn stops the power handle moving. It essentially locks the desk up
What are the the two special tools on the dash, sticks for crew fights? or to hold something open
Electrostars have a piece of wood in their cab (shaped like a hockey stick crossed with a paddle) which is used during manual coupling of units so this might be something similar?
Or perhaps it's to discourage train robbers! ;)
this piece of wood is just to prop the windows open, the windows can slide down. this acts as an internal lock.
The 'change end switch' and 'max speed' writing seems to be in a different font to most BR locos, and I have seen a lot of 33's with the same text font. Can anyone explain why this is, or is it just one of those BR things?
its been repainted with the wording painted back on by hand.
BUTTERLEY I thought it was, I go there regularly.
its an honour to be criticized by Spielberg
How long do the glow plugs take to heat the cylinders up on a class 33 from cold?
eggy hunk
I doubt very much if these old sulzer engine even have glow plugs. English electric (class 20,31,37,40,50,55) certainly don’t have them.
They don't have glow plugs.
Sounds like a cement mixer with a couple of bricks in it.
man used a screwdriver wha
my thoughts exactly
33201 at Midland Railway, Butterley
Seems like this engine does not have an electric oil pump to build the oil pressure before startup?
It does, what makes you say that?
The 16:20 from London Euston
Is that your train 0_0
yes... lol frustrating to see how railway worker film... missing all the interesting details...
like: show the gauges!!! not a finger pressing the start button!..lol if it is not asking too much !!
thanks for sharing anyway.
was that video recoded at the midland railway centre?
Didn’t seem very happy to be showing him did he ?
Opening the desk with a screwdriver (which is terrible) then throwing it down.
And the “grow up” when he blew the horn was just rude.
If you don’t like your job, get a new one I would of said to him
hhaa my dream now, get a screwdriver, find a TMD Set the points nick a 33 and bash it
Oh, dear - opening the desk with a screwdriver would rightly be a Form 1 offence; most un-professional so why not just do it right?
There's never a Traction Inspector lurking when you want one.
The whole cab area looks a mess as well with tools everywhere and that old piece of wood just lying about.
That sort of actions show me that the person operating the loco is not necessarily the owner and does not give a damn.
Who busted the ignition switch
None
It's not busted
ha
S
You are way too close to show the subject, this is pretty bad video work on what promises to be an interesting subject, hope you improve greatly in future, for now you have my sympathy!!!!
You have got to give it to him
He is at work
It's not rEcORd TraIn TimE aNd maKE MonEY