RESTORATION Old brake booster | How to Seal Replacement of Brake Servo | Unique Idea

how to repair brake booster leaks | How to Seal Replacement of Brake Servo | Unique Idea
#repair #brakebooster #Replacement
#Unique Skill,how to repair brake servo,brake servo seal,brake serrvo seal replacement,brake booster seal replacement,brake booster seal,brake booster seal kit,brake booster repair,brake booster repairing,brake booster rebuild,brake servo rebuild,brake servo repair,brake servvo repairing,repair brake booster,repairing brake booster,rebuild brake booster,rebuild brake servo,repair brake servo,repairing brake servo,brake booster,Seal Replacement
PLEASE LIKE SHARE & SUBSCRIBE OUR CHANNEL
@Unique Skill

[@user-cz3ov1is2l]

Испытательный стенд офигенен

[@filmart430]

I can’t believe it…after many videos of these people fixing stuff, first time I see them using a shop table and not the ground. 😳

[@mattyb7736]

I still can't believe he didn't just push the 2 halves together and turn about 20 degrees to release it all. Knocking the locating indents out then levering it apart? Dumb.

[@alexpanzer2601]

😅

[@mountainman5025]

Too much dirt in the brakes can be detrimental to the car owner's heath.

[@DEMON23027]

Герметичность прям на сто процентов,😂😂😂тут главное помыть и кувалдой собрать всё как всегда шедеврально.

[@user-ee5ql4yc9f]

А потом блять бегают и подсос воздуха найти не могут😂

[@DEMON23027]

@@user-ee5ql4yc9f ага😁

[@user-zk5pp3xo4p]

Спецы ×ули сказать

[@DEMON23027]

@@user-zk5pp3xo4p не то слово, тяп ляп и в бой.

[@dingami1085]

Nice job 👍🙏🇵🇭

[@28704joe]

I like the one where they make a lunar lander from an old bicycle and washing machine.

[@uniqueskill96]

Thanks

[@uniqueskill96]

Thanks

[@mountainman5025]

I LOVE THE HUMAN AIR COMPRESSOR!!!

[@uniqueskill96]

Thanks

[@Oleg5417]

Покрасил прям по воде, языковый стенд проверки вакуума)

[@uniqueskill96]

Thanks

[@nikn3086]

Здесь прекрасно все. И покраска с установленными резиновыми пыльниками прям поверх, и проверка на гермитичность. Это какие-то заводские условия практически

[@alekseykasarab]

ну тут хотя бы новые запчасти используют, а не помытые в грязной воде/солярке старые.

[@georgyvahrushev3908]

​@@alekseykasarabвсё равно ерунда.
Сам похожим занимался, со своими машинами. Когда плохо было с деньгами.
У ГТС зеркало цилиндра уже наверняка приехало. От коррозии, от того что там поршеньки уже поработали. Резинки по качеству тот ещё вопрос. Если их в соседнем сарайчике делают- как они будут тормозуху держать - тот ещё вопрос. Короче ресурс этого ГТС лотерея.
По вакуумнику- а его регулировать не надо?

[@alekseykasarab]

@@georgyvahrushev3908 само собой. Просто не часто у этих пакистанцев новые запчасти увидишь. Обычно промытое старое.

[@anmain]

это всратые реставраторы от доктора дью@@georgyvahrushev3908

[@bwilly56]

This is the guy remanufacturing the one you got on amazon 😂

[@gazza116]

dont have to bend any lugs to dismantle,just twist anti clockwise until grooves line up.

[@AuroraGw2]

It's probably been "restored" several times already

[@audeylimes1463]

You're right bro....over my dead body...😮😢

[@krassava6607]

Старый друг, лучше новых двух😂. А вообще прикольно это😎

[@georgyvahrushev3908]

Печально. Вероятность успеха 50 на 50

[@markosterman419]

I am usually impressed by the high degree of creativity and craft in these videos but the final product in this one is really scary.

[@uniqueskill96]

Thanks

[@lozantius]

We are spoiled here in the United States 🇺🇸
These repairs work and they work really well. Try going to a country that lacks all the bells and whistles so that you can see how things are done. Open up your eyes 👀 and see that talented people don’t necessarily have the luxury of nice tools and a clean shop. Good job on rebuilding that master cylinder and brake booster! It takes talent to be resourceful! That’s a trait that is very scarce here in the states!

[@uniqueskill96]

Thanks

[@GilsonJr.Whitout.Numbers]

Great job! I know that access to parts there is difficult, so you recondition them. And very well. Here in Brazil, I've already tried to change these repairs, but it starts to cause problems quickly.
Can you make it last well?

[@uniqueskill96]

Thanks

[@uniqueskill96]

Thanks

[@maelman2137]

They must use rubber grease as to prevent rubber seal expending & to prolong seal & rubber life😊

[@endurofan9854]

rubber grease?
uhm silicon grease???

[@alexanderserko9539]

Покраска по воде топ!

[@v.volynskiy]

Вообще-то обычно выходит из строя крайняя манжета главного цилиндра, и тормозуха попадает на вакуумник - появляются потёки на корпусе в месте крепления главного. эта тормозуха в итоге разъедает манжету (11:40), т.к. она из простой резины, не маслобензостойкой, и манжета начинает травить по центральному отверстию, по штоку толкателя. Герметичность вакуумника теряется, эффективность падает. Вдобавок идёт подсос воздуха во впускной коллектор через шланг отбора разрежения вакуумника. Мотор начитает троить на холостых. А больше в вакуумнике изнашиваться нечему. Можно было поменять манжеты в главном и центральную манжету на штоке. Она выдёргивается вместе с толкателем. Ну и покрасить потом. Цена работы - копейки.

[@uniqueskill96]

Thanks

[@user-yn6jj2zf6q]

Сука краской по воде это писец, а вакум для проверки просто супер😂😂😂

[@mehammod902]

Workshop kahan hin

[@arnaldomeirelles4317]

Perfeito !!
Mais uma obra prima da restauração.
O ponto alto é o uso da marreta para fechar tudo muito bem e depois o uso da garrafa de Sprite para fazer o teste, sem isso eles não teriam sucesso.
Acho que vou fazer igual no meu caminhão. 😊

[@uniqueskill96]

Thanks

[@halilharmanci7323]

Beatiful Vacuum test 😂😂

[@user-tx9cv8hr6b]

Если задиры или раковины в цилиндре,не помогут новые манжеты.

[@uniqueskill96]

Thanks

[@PakistaniNews940]

nice work

[@uniqueskill96]

Thanks

[@nasariqbal4568]

ماشاءاللہ بہت خوب جناب

[@uniqueskill96]

Thanks

[@technicalautomobile009]

Nice information sir 👍👍

[@uniqueskill96]

Thanks

[@haroldtreichler1260]

Good job ……. you surely know what you are doing. Did you use a new rubber diaphragm (the big one that fits between the two metal booster halves)?

[@tellyonthewall8751]

good job you say ... and ask if they changed the membrane??? M0R0N!!!

[@KAJI9lH]

he was whipped with a rag. this is the main tool for repairs

[@Karspa247]

What a gong show… these people are in the stone age. I would never trust that repair in my car.

[@edwardfaris8516]

That's racist...nah just f-in with you...😛

[@mountainman5025]

By the dents, I'd say it's not this booster's first rodeo.

[@uniqueskill96]

Thanks

[@bigd7121]

These are the type of engineers Boeing hired from India to work on its 777 MAX.

[@uniqueskill96]

Thanks

[@user-fx7zj9ej3c]

عذراً هذة الجلود اوالسيل (البادات)لا يوضع عليهم شحمه لأنها تتفاعل مع السيل وتتاكل وزيت الفرامل الوحيد الذي لا يتفاعل مع جلود البريك (الفرامل)

[@atamniasofyan5948]

فيه بعض الشحوم خصيصا لا تتاكل مع الجلود

[@ricardolizarraga7755]

Esa clase de bombas de vacío para pruebas deben ser muy caras 😂

[@ramzanramzanovic349]

Его можно крутить легче будет разобраться а не бит молоком😮😮

[@mickeymoreno7609]

Usar grasa en el cilindro de la bomba es un error terrible, se debe usar el mismo liquido de frnos para lubricarlo y no contaminarlo.

[@uniqueskill96]

Thanks

[@ahmedkamalalkamali6929]

Hello
But you didn't show or mentioned the where you bought the boosters kits

[@mandynazco1566]

Saludos para todos y muy buenos sus videos y también sus trabajos 🙋🙋

[@uniqueskill96]

Thanks

[@geraldriveraloubriel4412]

AQUÍ EN PUERTO RICO ES BIEN DIFÍCIL CONSEGUIR ESOS REPUESTOS PARA REPARAR EL BOSTEL Y BOMBA DE FRENOS....

[@uniqueskill96]

Thanks

[@user-lm8fm9tu6q]

Please show it in slow motion

[@uniqueskill96]

Thanks

[@user-bc3qd7ku7c]

Saludos amigos muy buenos sus videos desde Venezuela

[@uniqueskill96]

Thanks

[@treeguyable]

Ahh yes, the old tongue test. ( c'mon, we have all done it.)😂

[@user-zw4ns6fc2g]

شغل بدائي جبار

[@dubsydubs5234]

Well that was interesting, my condolences to the family of whoever got that put in their car. I've seen a lot of videos from them and that was one of the biggest hacks yet.

[@ralphmouse2574]

I really don't think they did too bad of a job considering the conditions that they were working in if all they were trying to do was get their brake booster working again I think they did a good enough job if it was holding pressure and not blowing bubbles, but yeah I do think it would be a dishonest hack job if they're trying to pass it as rebuilt or even new, I just brought home a 75 mgb yesterday and drove too after sitting over a year, ran horrible but I made it,pulled the carb going to clean here shortly, but I spayed soapy water all over the booster and I'm getting big bubbles all around the two halves, I'm going to try and separate the halves and clean it up add some right stuff and press and crimp them back and see how it works

[@ralphmouse2574]

Forgot to mention yeah I had no brake booster assist at all it was a big surprise at first

[@dubsydubs5234]

@@ralphmouse2574 They usually turn and come apart no need to mess with crimping. Don't have your face near it the spring is quite spicy.

[@DggFguh-ei8zd]

Hathoda ustad

[@uniqueskill96]

Thanks

[@reinhardwolters7180]

Sanding seems to be fun. And drive around with a screwdriver everywhere.

[@AuroraGw2]

Why does it look like this is not the first or second time it has been "restored"

[@rldirh55]

60년대엔 한국에서도 이렇게 고쳐 사용했다.

[@uniqueskill96]

Thanks

[@blazeykk]

I like the compressor they use
I like the compressor they use. Brand - lungs 😂

[@uniqueskill96]

Thanks

[@user-un2ni8dl7y]

Good work 👍

[@uniqueskill96]

Thanks

[@carlossegatti8175]

alguno que sepa, le pone grasa adentro de la bomba de freno ?????????????????

[@uniqueskill96]

Thanks

[@juansebastiancarvajalruiz6436]

La prueba de vacío es exacta 🤦🏻‍♂️🤣

[@MA-is5hh]

Oh yes the good old home repairs.. only for the true brave .😅😂

[@rioprexchannel9798]

Nice job n photo....tq

[@uniqueskill96]

Thank you too

[@sanjaykisen2524]

is it worth the effort for the quality whatever you are getting for new.

[@MH-WM]

How did he not get paint on his arms? Well done

[@edwardfaris8516]

The rag keep him clean

[@DggFguh-ei8zd]

😅 hathoda ustad

[@uniqueskill96]

Thanks

[@diegoacosta8789]

Todo lo arreglan son buenos mecánicos

[@uniqueskill96]

Thanks

[@kostyamussolini7921]

Не ну это не дело. Есть шедевральные ремонты но это просто хрень полная. Зря только калечили все .

[@uniqueskill96]

Thanks

[@chip-jd2oz]

Блин перевернет балон и красит))) манжеты литолом мазать это финиш

[@jonsnow2861]

так он им и сальники намазал чтобы им было проще обратно вылезти)))

[@uniqueskill96]

Thanks

[@uniqueskill96]

Thanks

[@juhomaki-petaja]

Why they didnt hammer that case lip to round when all was apart

[@MechanicAvenue]

Good Job 👍 Do Hard Win The World ❤️🫵👍

[@uniqueskill96]

Thanks

[@LuisSanchez-gz7rj]

Perdón pero qué grasa está usando,para armar un cerbo o ayuda pedal viene una grasa especial es blanca siliconada

[@juancarlosvalejo7394]

i need to repair mi brake servo, where is this place??? tnx

[@user-wp4et4jz8d]

Бурундуки все починят😂😂😂

[@carlosarmandotellocupido1411]

ese camarografo mueve mucho la camara ya me marie

[@robertoudokrapf453]

OLÁ . 24/10/23 Vi o vídeo como também li uma parte dos comentários . Não levaram em consideração que deve ter sido gravado no mês de maio. É uma "BAITA MAITAÇAO". O cara não sabe nem abrir o sero. Sinto muito tempo perdido

[@uniqueskill96]

Thanks

[@user-dn3od1hv7x]

ยอมรับว่าพี่เขาเก่ง

[@nalinagarwal7300]

Very reckless. Assembling wet and greasy parts. Water droplets have no place in the brake system. Also the paint on the wet greasy surface won't last even few days.

[@uniqueskill96]

Thanks

[@Kostya_iz_Ekb]

Из говна и палок , сделал говнявую палку.

[@user-sw7tk4hr1w]

Из говна и палок, только без палок.

[@TurkishMarshall]

Good job 👍🏻

[@uniqueskill96]

Thanks 😁

[@agustinp.c.3331]

COMPRA LIJA

[@HomaNaroui]

صدنفرازشماها توایران بودین ایران والله گلستان می‌شد ما یکی ازاین کارهایی که شمامیکنین ماانجام نمیدیم خیلی کارازشمابرادران پاکستانی دیدم شاخ درآوردم هرچیزی رامیسازین درود برشما مردمان سخت کوش درود

[@sergeypopov9318]

Ужас

[@Doctorcar1]

Всех к Илону в контору.

[@uniqueskill96]

Thanks

[@warriordugan7236]

I thought I was the only one thinking this was a piss poor hack job. I came to check my thoughts here in the comments and I was not wrong.

[@uniqueskill96]

Thanks

[@luizantonirodrigues4662]

É tudo feito na base do martelo e talhadeira no mais puro sistema "Nasco" ou seja nas coxas 😅😅😅😅

[@uniqueskill96]

Thanks

[@leyakathalikhankhan5289]

Good

[@uniqueskill96]

Thanks

[@user-vc9ig3pf5y]

The Old fart that used to be My would be very happy with the Work done with a coat of black paint He was happy

[@uniqueskill96]

Thanks

[@user-kd2uu4fk4r]

Монтажору руки оторвать. Глаза болят как дергается.

[@uniqueskill96]

Thanks

[@japc4326]

That should last one stop light or donkey, whatever comes first.

[@patrickdedoehetzelver1960]

you do a good cleaning job, but a poor paint job, even the rust is not totaly removed

[@uniqueskill96]

Thanks

[@aqibhameed7830]

Location

[@uniqueskill96]

Thanks

[@user-ci5vd2yk1p]

зато манжеты японское

[@arek6767]

Never, never (!!)

[@uniqueskill96]

Thanks

[@uniqueskill96]

Thanks

[@boldorboy08]

Is this click bait? Surely it can't be a real repair?

[@dubsydubs5234]

Welcome to Pakistan the home of feck it I'll fix it with a big hammer.

[@paulduckmanton819]

Too rough for me😮

[@eraldosantos6433]

🙋‍♂️🇧🇷🇧🇷🏆🏆

[@uniqueskill96]

Thanks

[@TanveerAhmed-gl5jk]

You are very good brother best mechenics in pakistan no doubt about that v good video👍👍👍👍👍👍

[@uniqueskill96]

Thanks Brother

[@RayTitske]

sorry but that restoration brake booster wil never come in my car again .

[@yargonslavter]

Some places in the world lack parts, they're "forced" to repair this items. At this repair shop even lacks tools, he used his tongue to measure vacuum hahaha

[@mhoellvheyanx]

Sorry, because you're not the only one who has a car 😂😂

[@Lucas-ix8bg]

I would prefer this hand repaired brake booster then the fake/replica oem ones that hundreds of thousands of people all over the world are driving on.

[@mhoellvheyanx]

@@Lucas-ix8bg excatly, you are smart broo 👌👍👍

[@ganeshbehere9101]

You are right

[@BBMteam868]

warang garantiya ocaledad ang mga repair na pyesa. replace na yan.

[@uniqueskill96]

Thanks

[@user-of7wi7sv4g]

1

[@vincentfauberteau529]

on ait bien chez les fous ...

[@nicokyriak]

Skill, Skill, skill. The best in the whole world.

[@uniqueskill96]

Thanks

[@madmanmechanic8847]

I wonder how many people got killed when the brakes went out because he left all the pits n rust in the master cylinder and didnt hone it ?

[@dubsydubs5234]

I was looking for that comment, it was one of the first things I didn't see happen, all it all though what a fecking hack there wasn't much they got right.

[@madmanmechanic8847]

@@dubsydubs5234 Insurance we dont have insurance you family that just got killed when the Master brake cly blew out from the shoddy work oh well you are on your own.

[@MrButtonpresser]

It's no wonder they don't recommend refurbishing boosters.

[@philipketchell8369]

It's a Servo...brake booster

[@uniqueskill96]

Thanks

[@nojtom]

He used grease to lube the master cylinder piston. Absolute junk. Grease will expand and deform all the rubber seals in that thing. He should be charged with manslaughter after the crash.

[@ramansharma5144]

Yah Tarika theek nahin hai isko cooler se kholie

[@MichaelLeschnig]

wo bekommen die Leute ihre Ersatzteile her... in Deutschland bekommt man sowas nicht zu kaufen... zumindest wüsste ich nix davon

[@chooiseah1377]

WTF...Ready for reexport to Japan..... 😍😍😍😍😍😍👺👺👺👺👺👺😂😂😂😂😂😂

[@uniqueskill96]

Thanks

[@alexchancharoenroj1091]

Soooo headache with the guy who holding camera!!!

[@user-lz2ip6dq1f]

пиздец... я ни хочу видеть как он восстановит ВУТ

[@georgyvahrushev3908]

Эта жопа называется отсутствие денег.

[@uniqueskill96]

Thanks