Making Polymer Clay Jelwery with Wires | DIY Turquoise Ring Bracelet & Earrings | Studio Vlog 3
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2024
- Hi guys! Here's a video of making turquoise jewelry with polymer clay and wires. It's a vlog and tutorials combo. Hope you enjoy this DIY ring, bracelet, and earrings-making session with me. :)
You might like to check out these tutorials:
3 minimalist earring hooks tutorial: • 3 Earring Hooks Tutori...
Paper clip chain bracelet: • Minimalist Paper Clip ...
Alright, let’s get started!
Timestamps:
0:00 Making turquoise beads with polymer clay
4:01 Making turquoise earrings with wire
6:09 Making turquoise ring
9:07 Making turquoise bracelet
#jewelry #tutorial #diy #turquoise #polymerclay
****************************************************************************
Materials I used:
1. 16g raw brass wire- Find similar here: amzn.to/39t4Ov3
2. 18g raw brass wire- Find similar here: amzn.to/3MnAdOl
3. 20g raw brass wire- Find similar here: amzn.to/3NBdYEX
4. White acrylic paint- Find similar here: amzn.to/3tsqUoX
5. Gold leaf sheet- Find similar here: amzn.to/3NLpzS7
6. Clear translucent liquid sculpey:-Find it here: amzn.to/3mDinvi
7. Cernit translucent white- Find it here: amzn.to/3tuYQRP
8. Cernit translucent turquoise (currently not available)
9. Brass earring posts- Find similar here: amzn.to/39jAlA5
(You could use copper, aluminum, or silver wires if you like, you could also use artistic wire for practice purposes, don't recommend it for wearing though. )
Tools I used:
1. Side cutter/Flush cutter - Find similar here: amzn.to/3MoVG9E
2. Flat nose pliers- Find similar here: amzn.to/3yU52X9
3. Round nose pliers- Find similar here: amzn.to/3MiJ044
4. Chain nose pliers - Find similar here: amzn.to/3MfTHo7
5. Mandrel Pliers- Find similar here: amzn.to/39kr9eo
5. Bent nose pliers- Find similar here: amzn.to/3l8fzpv
6. Mandrel pliers- Find similar here: amzn.to/39kr9eo
7. Metal Block- Find similar here: amzn.to/3lik8gJ
8. Chasing Hammer- Find similar here: amzn.to/39noHUD
9. Nylon Hammer- Find similar here: amzn.to/3PfLkuq
10. Ring Mandrel - Find similar here: amzn.to/3wpketx
11. Flex Shaft- Find similar here: amzn.to/39qcdvh
12. Sandpapers 400 & 800g - Find similar here: amzn.to/3sEaUiY
13. White silicone polishing wheel- Find similar here: amzn.to/3wCt1Zk
14. 1mm drill bit- Find similar here: amzn.to/39jhm8M
15. 1.5mm drill bit- Find similar here: amzn.to/39jhm8M
16. Wooden Bracelet mandrel- Find similar here: amzn.to/3HaOOdY
17. Clay cutting blade- Find similar here: amzn.to/3zw4NBQ
18. Acrylic roller- Find similar here: amzn.to/3xjqrGv
#earrings #bracelet #ring #jewelry #diyjewelry #turquoisejewelry #turquoiserings #turquoiserings #bracelet
****************************************************************************
Please like, subscribe, and turn on notifications if you like to see more jewelry-making videos from my channel. I'll be doing my best to upload a new video every week.
If there are jewelry pieces you would like me to show you how to make, let me know in the comment below.
Thanks for watching! Stay well and safe. :)
Special credit:
Music by mj apanay - tokyo - thmatc.co/?l=0A73EB5E
Music by mj apanay - 11:23 - thmatc.co/?l=E6FABEFA
Music by Yung Wacho - That's That (feat. Tony Rashad) - thmatc.co/?l=FDD197C0
Sign up thematic via this link if you like:
app.hellothematic.com/?via=ma... - แนวปฏิบัติและการใช้ชีวิต
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 65 [ซับไทย]](http://i.ytimg.com/vi/4EsinscQCfs/mqdefault.jpg)
Hi guys, I hope you like this vlog-style tutorial and find it inspiring :) I've always been wanting to make turquoise jewelry and I was waiting for a modern idea to happen. Then here it is, in June, which is summer for most of us. I've also tried many times making those turquoise beads, and they finally look so amazing! (at least to me. :D) Have fun making these summer jewelry. :)
Amazing vlog with summer vibe jewelry..👍🏻😍
@@kirandk9413 Thank you Kiran ! I hope your a chance to make some of them ☺️🧡
Yes u are the greatest 😊 plus my birthday 🥳 is in June the month of wedding 🎉🎉🎉 👰🤵👰🏽♂️🤵♀️🤵🏽
& my fav color turquoise 🎨
@@egyptianprincess6006 Thank you! I’m so glad you like these turquoise jewelries, sounds like they are made for you. Hope you have a chance to make and wear them on your birthday 🎉 ☺️🥳☺️✨✨
شكراً كثير لك. ساقوم بالتعلم منك.
كل ماتفعله يبدو غايه بالجمال وشي مبتكر. شكراً لمشركتنا ابداعك. ❤
All beautiful! The wire really adds elegance to the clay pieces.
Yes it does! Let me know if you tried making them. :D
L♡VING how you set the ring. Just beautiful 🩵
Thank you so much ☺️ I’m so glad you like it .
Love the ring design. That's the only part of jewelry I've never made.
Thank you 😊 Hope you have a chance to try making that too.
Love this! 🌸💕🌸
BEAUTIFUL! Thanks for sharing
So welcome Charlotte!
It’s so beautiful! Thank you very much! 🌸💕🌸👍😄
Thank you Ahren, so sweet of you ☺️🧡
I love these! The ring is my favorite but they are all fantastic. Thank you for sharing ❣️😊😊
Thank you Amber….! I’m so happy reading your sweet comment ☺️🤍
WOW.. that ring is GORGEOUS 🔥
Thank you Donna! ☺️🧡
Beautiful ❤
Thank you! 😊
It was great seeing you make the earrings, bracelet and ring - Beautiful work :)
Aw… Thank you so much Joanne, so sweet of you ☺️🧡
Lindos, parabéns! 👏👏👏👏
Muito obrigada 😊✨✨
Love it 😍
Thank you 😊🧡
Love this! I hope you do more with polymer clay! I own a PC small biz and love learning new techniques! Thanks as always Maggie!
So welcome Daj! I’ll be including more PC jewelry definitely. Just let me know even if you want to see some specific techniques:) Wishing you all the best in your PC biz too ✨
@@MaggieCSAtelier thank you so much! 🤍
Beautiful
Thank you! ✨
Gorgeous 😍
Thank you …! ☺️🧡
I have never worked with polymer clay...you gave me feed for thoughts...I shall give it a try x
It opens up a whole lot of design possibilities for me, let me know if you ever try :)
Maggie!!! Yes, girl! These are gorgeous. I’m so thankful for your vlog. I’d love to hang out with you and drink coffee and make jewelry.
Hi J….! I’m so happy to see your comments :) I’d love that too, always say yes to coffee ☕️😆
@@MaggieCSAtelier Haha, me too. I am a coffee fanatic. I have a question for you. When you hammer an earring, like a crossover threaders, how do you hammer it smooth without texture? I hope that makes sense. I want to hammer part of the wire up half way but without the texture. I've tried but it's never smooth. Video, maybe?
Hello J :) I’m not 100% sure with your design. I think if it’s threader, means they are not joining at one of the end. To hammer on it, you could try to open up the threader like how you open a jumpring. Then hammer on the parts you want. Another way would be you hammer the parts first before the wires crossover. Maybe send me the picture of the design, then I might be able to create a video for that issue. :)
@@MaggieCSAtelier I will try to do that. I’m computer stupid so I’ll have to figure it out. Lol. Thank you so much.
@J Sure, let me know how it turns out. You can also send me pictures to any of my social media links. But let me know when you do, because I don't check on them that often. :)
Wow amazing ❤
Thank you. 😊
Amazing ❤
Thank you 😊🧡
Thank you for lessons in measuring
My pleasure 😊
So beautiful
Thank you so much :)
Muy lindos te felicito 💐💝 por tu trabajo maravilloso mucho arte ❤
Gracias por tus amables elogios. ☺️🧡✨
Muy lindo todo echo desde mi como lo otras cosas que muestra conozco mi trabajo desde los 80 en la upr. Desde niña. Desde mi vida pasada.
Muchas gracias. Espero ver tu trabajo algún día. :)
Love your channel
Thanks so much Jane :)
Oh Maggie, you outdid yourself. Well done, these are just gorgeous. 😍
Oh thank you darling ….! I’m glad that you like them ☺️🧡
So clever! Do you need to coat or treat the brass wire so it doesn't tarnish and discolour?
Thank you! Yes you can send it for gold plating or polish it with renaissance wax to prolong the shine. But I normally don’t because I can give it a quick polish with flex shaft if there’s any discolouration.
What type of drill do you use? These are so pretty 😍
Thanks so much :) You can check out all the materials and tools list down below video description. ✨
This looks amazing! I am new to polymer clay and hoping to ask some advice. Can you bake with sterling silver or tinned copper wire? Also couldn't you assemble the earrings before baking?
Thank you! I’ve only tried goldfilled and bare metals, so I’m not so sure with tinned/coated copper. I think silver would be fine. The polymer clay beads would deformed a little here and there when I insert metal wire into it, then there’s quite a bit of reshaping to be done before baking. To keep the earring beads in better shape, I drilled holes after baking, which would give me a cleaner look on the beads and the drilled holes for inserting the metal parts.if you happen to experiment with tinned copper insert into the beads, let me know the result . Hope this helps! :)
@@MaggieCSAtelier Thank you so much!
Its a lovely set.
But please may I know from where did you get the earring posts..Can u please share the link.
Thank you. I got mine from local seller but I’ve included similar ones in description below video. :)
Love this video! I have a question it’s my first time making earrings . So I already bought 20g Gold Filled Round Half Hard Wire is that also work in the oven?(regular oven from home)
Yes it’d work fine as long as you are using low temperature. I’ve used 110- 130 degree and it was fine. Get an oven thermometer to be sure of the heat of your oven is accurate. Enjoy making! :)
Thank you for your answer do you put the wire in all of the earrings ? Because in the video you put just in one sorry I’m really new with this also I can’t make the shape right.
All of my design I can’t have it in the same shape different sizes 😢 because got so sticky
I didn’t put wire in all the beads as it requires quite a lot of reshaping after that. (But it’s an option for those who doesn’t have a flex shaft) I prefer drilling holes after baking the beads. This method produce clean holes for the beads. If the clay got sticky, reduce the use of acrylic paint and let the clay sit around for a day or two before cutting. Hope this helps:)
Conozco mi trabajo
Gracias :)
Lovely. Are you using artificial or real leaf?
Hi it’s faux gold leaves, product link is in description below the video :)
Can we use cross peen/jewellery hammer thats is 10 or 50mm head instead of chasing hammer for flatten the wire?
Hi I’m using chasing hammer because the dome head could create ‘a gradual’ flattening piece. Not quite sure if the flat head of cross pein hammer could do that. Let me know if you ever try.
Beautiful
Thank you :)