You viewers are decreasing day by day cuz u are making videos on things most ppl can't attempt.... I want more videos like diy rc boat... Loved that.... 🥺🥺🥺
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
Given what I often laser engrave, probably the magnets are to hold the material down, likely with steel washers or what-have-you. It's great for paper and cardstock.
Danke, dass Du dir so viele Mühe gegeben hast, in diesem Mini-Format Alles zu organisieren. Miniaturisieren auf hausgemachter Art hahaha. ! Das ist natürlich menschlich & die krone der Entwicklung ! Ich finde deine Professionalität natürlich toll. Mach weiter mein Freund und Alles Gute.
El cnc que te has currao me mola la hostia, el más simple que he visto y fácil de entender. Cuanto trabajo hace la 3D, quien quiere fábricas, próximO objetivO encontrar un sustituto para el plástico que no enguarre la Tierra 🌎. Un Peo pal que lo lea..... si llegaste hasta aquí....UN PEO PA TI!!
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
Good job! I like the coin bank idea so much, so I re-created one for myself. If you are curious to see how it might look when non-pro is doing it - welcome.
Could you possibly do an automatic thermostat with your arduino? It would be a great help. With heating plate or similar bases or with electronic thermometer. Thank you very much for doing so!
I really appreciate your hard work bro I hope people more interest and more views in this type diy videos and true justice for your hard work , cost and research 🙏
Amazing. It might not have a purpose, but it's a delicious food to human brain. When we do then in our own hands, you'll feel the difference. Good job.
Una pregunta de cuantos cm cuadrados.. Es la base de la CNC láser.. Me dices xfavor.. Lo quiero intentar armar buenos videos.. Siempre me han fascinado tus videos
Hello sir,i have watched so many videos of othets.They were just doing and we didnt get nothing much knowledge regarding the thing.Thank you so much that you have explained so simplier and is very easy to make them practically by us.And i request you to post the video of making a writing model with pen
Buenas oye el último invento si te lo quisiera comprar en cuanto me lo venderias? Y puede hacer letreros o puras imágenes? Y habrá forma de que se le pueda quitar la parte de abaja así se podrá usar en cualquier superficie gracias
Very interesting but dangerous projects that might not work like proposed. Three 18650 in a row will deliver >10V. How did you regulate the voltage for your coin bank? Why did you split the voltage for the coin detector instead of just using wires powered with 3.3V and an anaolg input? How long do the batteries last? From my experience the arduino consumes a lot of energy. This is especially true if you don't use any deepsleep and even don't deactivate the servo. BTW many servo types don't "like" the zero degree state. It is better to use 20° as long as you don't need the full moving range of 180°, as in your example. There is no under-power protection in your circuit? This is dangerous for your batteries... at least for the batteries. Regarding Home Automation: 5:01 Are you sure that you should connect wires like this (not removing isolation, nothing around the wires, switching blue cable (neutral instread of phase)? This might lead to fire or harm people because in the off position the phase, cable is still conneted. You shouldn't post such dangerous videos. The CNC-Laser: Do you think, that it's a good idea to use a high power laser without any safety measures?
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
The 3rd project was Awesome...like Literally Awesome...
The third project is amazing... Loved the third one ..🤩
the last one is amazing
I have worked with arduinos before but all I could do was make a light pattern
You viewers are decreasing day by day cuz u are making videos on things most ppl can't attempt.... I want more videos like diy rc boat... Loved that.... 🥺🥺🥺
i will try to upload simple video 1 simple video in a week. don't worry i will be back :)
@@TheWrench thanks
it's very creative in making anything 🎉🎉🎉
Mind-blowing was the printer 🖨️
Bro your laser engraver is very nice
3rd one is really amazing👌👌
Isn't 3 lipo batteries too much to power the arduino nano?
the whole first thing could have been replaced with a stick on a spring
There not lipo there 18650 lion cells. lipos are phone battery
@@cadellduffill9615 yeah you're right
@@kaeverens agree
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
Bro...your idea are so mind blowing....I am glad to see your video
Great stuff, but I would take nature sounds over the music any day!
agree 1000%.. these youtube stock music is made by Satan ))
yeah agreed. i would also probably not rate the first creation since i'd rather a piggy bank. its faster. and looks better. and cheaper
Music doesn't have lyrics though.
Up
IDK about you but I love this song
Only the first tho second has to be nature sounds
It was really impressive for me. I'd like to know how you did learn to start your fantastic job.
The third one was super✨
Muy buenos proyectos gracias una consulta cuanto es el tiempo aproximado de grabado de ese lazer y de que tamaño es la foto a engrabar
The third one is great project! I would try to build. What are the 4 magnets used for?
Given what I often laser engrave, probably the magnets are to hold the material down, likely with steel washers or what-have-you. It's great for paper and cardstock.
Danke, dass Du dir so viele Mühe gegeben hast, in diesem Mini-Format Alles zu organisieren.
Miniaturisieren auf hausgemachter Art hahaha. ! Das ist natürlich menschlich & die krone der Entwicklung !
Ich finde deine Professionalität natürlich toll. Mach weiter mein Freund und Alles Gute.
El cnc que te has currao me mola la hostia, el más simple que he visto y fácil de entender.
Cuanto trabajo hace la 3D, quien quiere fábricas, próximO objetivO encontrar un sustituto para el plástico que no enguarre la Tierra 🌎. Un Peo pal que lo lea..... si llegaste hasta aquí....UN PEO PA TI!!
*Wow all ideas are Awesome bro just too good 👍👌👏👍*
a doubt friend, with which to fill the holes of the arduino nano
?
Wow, the last one!!! I will try to do it. Thanks
Great project the third one, but why did you used neodymium magnets?
Luigi Pio Mastrodomenico because why not
some great arduino projects! the first one reminds me of Claude Shannon's 'ultimate machine' which turns itself OFF everytime you turn it ON 🤣
Sir you are so genius i can't tell
EXCELLENT CREATIVITY
The wiring at 8:35 and 8:46 are different! Which one is correct??
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
Nice Video Buddy !!!! 😋😋
an amazing achievement! Keep going.
I love the third Arduino project :)
I am binge watching your channel, utterly amazed to see your work
keep it up my man
Love from Pakistan
Good job! I like the coin bank idea so much, so I re-created one for myself. If you are curious to see how it might look when non-pro is doing it - welcome.
The laser etcher rly got me.
LIKE AND SHARE FOR YA!
How you feel when it was completed.
Indian tech youtubers are the best
What kind of driver do you use in cnc ? (driver on shield Arduino)
The cnc machine is quite cool.
Could you possibly do an automatic thermostat with your arduino? It would be a great help. With heating plate or similar bases or with electronic thermometer. Thank you very much for doing so!
you could probably use a temp/humidity sensor or a thermistor with a relay to accomplish that.
I learned how to glue and solder things. Great !!
nice keep going on it
Sir this project can do it on capstone in college?
Where did you plug the laser into? You appear to be using a CNC shield, so I'm guessing you plugged it into the "SpnEN" port, if you have one.
We're can I find the files for the laser cutter?
All good found it silly me
*where. How the hell did you mess up that bad?
Fy 64 most likely autocorrect
@@sylvervangenderen9359 he even edited it wtf.
Can i ask how thick is the neodymium magnet and whats the diameter of it (i jist wanna know before i buy it)
wouldn't supergluing the adruino board shortcircuit the other end's solder'd points?
i love the laser burner so much
Bravo complimenti 😁
How can we get the plastics for the last projects thanks 🙏
The last one is fire!!
Cool and amazing. Thanks for sharing!
Can I get software fine laser engraving project, linking saying that is in your trash folder
Where did he get it the part from plastic of 3rd project . Can you tell me pls
Hey the CNC link says you moved those contents to your google drive bin, can you restore it please?
Yeah correct
I found Benbox software and firmware on internet but didn’t get circuit diagram
I really appreciate your hard work bro I hope people more interest and more views in this type diy videos and true justice for your hard work , cost and research 🙏
What are neodymium magnets use for...
How you got these things...like modulus etc.
you used normal laser light or any different laser light
Doe the relay tolerates AC connection....?
Your lightbulb idea, will it work with arduino nano or alexa?
Yes bro.of course it work with Arduino
@@muhammedsaad5952 different code though right? How about Alexa?
@@rif6876 he pranked you. Arduino doesn't have a wifi. you need to have wifi on your board of choice.
Nice creativity, LOVE creation
It may be useless for small minded people but it useful for me it will be good for students and future generations
WOW....NICE IDEAS...!!!!
Thanks
I will try to make some projects in the Indonesian version.
Ehrling music?
Yeahhh broooo👍👍👍👍
3:53 that relay doesnt look like the one on the 2nd link.
great the first one is like a money bank
Amazing. It might not have a purpose, but it's a delicious food to human brain. When we do then in our own hands, you'll feel the difference. Good job.
Is that second one really work??
On what all materials can you print using the last project in the video?
I did not find the link to the programming code for the second project (relay and with nodemcu).
Good, I would like to know if I could pass the code to program the motor in Arduino
Una pregunta de cuantos cm cuadrados.. Es la base de la CNC láser.. Me dices xfavor.. Lo quiero intentar armar buenos videos.. Siempre me han fascinado tus videos
Any chance to make a CNC drag knife??
Such clean soldering :o 👍
You are good and nice worker
멋진 아이디어네요. 좋은 영상 감사합니다.
What is the model of the 3d printer used to print the parts for the last idea ?
Can you watch my newest video? Me and my friends made a spider-bot in school.
Can i use esp32 instead of nod mcu with the same programing codes for the home automation project?
Could the laser CNC be used to etch electronic circuits? Also, isn't the laser light harmful for the eyes?
Pebroamol
Liga da brincadeira
Hello sir,i have watched so many videos of othets.They were just doing and we didnt get nothing much knowledge regarding the thing.Thank you so much that you have explained so simplier and is very easy to make them practically by us.And i request you to post the video of making a writing model with pen
Which app have you used in the 2nd project?
Blynk . And do you know what kind of bulb he used ?
Which kit you have used for laser printer
He 3d printed them
Would it engrave aluminum?
Good job!!! I liked the laser idea very much!!!
Are you from Kazakhstan?
What type of bulb do you use for the second one? Because my bulbs work on 250 volts, not 9 volts and they don't have wires.
You are very very generous
Hi my name is Harsh Chawathe
Nice ideas
first project help me to making any project for science fair
I'm interested in i want buy it
Great tutorials, especially the CNC machine. I know how much effort it takes to make such a video.
Buenas oye el último invento si te lo quisiera comprar en cuanto me lo venderias? Y puede hacer letreros o puras imágenes? Y habrá forma de que se le pueda quitar la parte de abaja así se podrá usar en cualquier superficie gracias
Very interesting but dangerous projects that might not work like proposed.
Three 18650 in a row will deliver >10V. How did you regulate the voltage for your coin bank? Why did you split the voltage for the coin detector instead of just using wires powered with 3.3V and an anaolg input? How long do the batteries last? From my experience the arduino consumes a lot of energy. This is especially true if you don't use any deepsleep and even don't deactivate the servo. BTW many servo types don't "like" the zero degree state. It is better to use 20° as long as you don't need the full moving range of 180°, as in your example.
There is no under-power protection in your circuit? This is dangerous for your batteries... at least for the batteries.
Regarding Home Automation: 5:01 Are you sure that you should connect wires like this (not removing isolation, nothing around the wires, switching blue cable (neutral instread of phase)? This might lead to fire or harm people because in the off position the phase, cable is still conneted. You shouldn't post such dangerous videos.
The CNC-Laser: Do you think, that it's a good idea to use a high power laser without any safety measures?
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
@@davidqueiros96 It's magic 😂
Finally I found someone who is Indian legend
Amazing Maker!!
Third one is amazing 😍✨😍✨😮✨
Question please
Where is the code for the last invention
P.s: does it work on arduino c
Bhai from 4 yrs I'm watching ur videos from that time onwards I never get bored while watching ur videos becoz it's interesting keep it up 😊😊😊😊
I can't understand the connection of the resistors in the first project... Where does the leg of the 2nd resistor gets connected to?
when coin will be placed.. it`ll short both capacitors... servo will receive signal and coin drops..
@@ReviewFlixOfficial thanks a lot
there's a part that I don't understand in the video, at 0:47 we saw the editor soldering the "red wires to the 4.7k Ohm resistor" and the black wires to the 10k Ohm resistor and the orange wire to the end of the resistor. And then at 0:52 they change the position of the black wire to the orange wire and after some time at 1:02 the black wire goes back to soldering on the resistance.
Great video. Making it look easy.
third one is super
Which machine you are using
Cool and impresive!😍
Sir what are components required for second project replay plz 😭
Nice video but can you do death metal music next time