Followed your instractions. Everything worked perfectly. I have no fake paper jams anymore. THANK YOU A MILLION. YOU HAVE MY TOTAL RESPECT. Lawrence from Athens Greece.
I just cleaned my roller with a simple vinyl eraser, now the roller has a better grip for the paper and I have no more paper jam. In other words I didn't even have to replace the parts. Worked for me at least :) Thanks for video!!
Thank you sooo much! I watched this, then ordered the part on Amazon. Now I just fixed it!!! Never would have thought I could do this! Getting the old roller out was a little scary, but it all works great now! Yay! California, USA
Thank you very much! A trick for people at home that don't want to spend money on a new roller: You can remove the clip of the roller to free the rubber band. Now turn the rubber band inside out which effectively gives you a brand new rubber band for free. Now simply clip the rubber band back to the roller and install it back into the printer.
Fantastic video - very clear and easy to follow instructions. Thank you. Looks like the aggravation caused by repeated paper jams is behind me now. The only thing I'd mention to others trying this repair is that I had to punch in the code to get the 2ndary menu a few times (similar to what others have written). But once it appeared, the rest was straight forward.
This worked - except I don't have a pickup roller replacement, but you can actually pull the retaining clip from the center of the pickup roller and then removed the rubber roller gasket material and invert it (turn it inside out) and then replace it on the roll and reinsert the center retaining clip. The rubber on the inside of mine was pristine and had good grip. After simply flipping the rubber gasket around it now grabs paper everytime. Getting to enter 2ndary service was tricky and took 3 or 4 tries before i got into it.
@@esshoul if you find it fails and stops gripping again, you can also re-invert back to the original side and try and re-align the rubber to get a fresher part of the rubber in contact. And if that doesn't work I have even considered cleaning it and brushing some fresh silicone caulking/sealant to it the next time it fails for me to get fresh grip (RTV 732 would be my choice)
conkl001 Thank you SO MUCH! I was ready to throw this printer out. Your directions were very clear - I'll give it a try and soon as I order a new roller.
The tray that holds the cartridges in my printer that you’re showing on this site is stuck I cannot pull out the tray. Do you have any idea what I can do that I can fix this.
Hello. I have tried repeatedly to reveal the 2ndary service on my HP printer and it’s not working. I also tried to remove the roller and there does not seem to be any way of releasing the roller. Any help would be greatly appreciated. I would love to get this great printer to work again. Thanks
HELLO AND CONGRATULATIONS FOR THE VIDEO. DESPITE I HAVE REPLACED THE ROLLER, THE PRINTER IN THE PRINTS OF MULTIPLE SHEETS TAKES ONE AND THEN BLOCKS. YOU KNOW ME WHY. INFINITE THANKS
Thank you so much for the video explanation. How would anyone know, there is a hidden service menu without your video.
Followed your instractions. Everything worked perfectly. I have no fake paper jams anymore. THANK YOU A MILLION. YOU HAVE MY TOTAL RESPECT. Lawrence from Athens Greece.
I just cleaned my roller with a simple vinyl eraser, now the roller has a better grip for the paper and I have no more paper jam. In other words I didn't even have to replace the parts. Worked for me at least :) Thanks for video!!
For small amount of copy/printing this is good. But if you printing some thousands sheets - only replacing for new one!
Thank you sooo much! I watched this, then ordered the part on Amazon. Now I just fixed it!!! Never would have thought I could do this! Getting the old roller out was a little scary, but it all works great now! Yay! California, USA
You are welcome!
galing ng Tutorial mo master; di mo ako pinahirapan
Welcome po
Thank you very much!
A trick for people at home that don't want to spend money on a new roller: You can remove the clip of the roller to free the rubber band. Now turn the rubber band inside out which effectively gives you a brand new rubber band for free. Now simply clip the rubber band back to the roller and install it back into the printer.
No that I don't want to spend money for the replacement kit. But your suggestion gives a instant solution. Brilliant recommendation. Thanks pal !!!
You are the man!!! It worked just fine, no more “jam in tray 1” thanks, thanks thanks!!! Greetings from Bulgaria!!!
Very good!
Resolved the substitute issue of Pickup Roller at my CM1415fn printer.
Thank for sharing this trick.
I´m from Brazil, too.
You are welcome
Thank you for this...it worked out great for my roller replacement saving me from replacing this $900 dollar printer
Fantastic video - very clear and easy to follow instructions. Thank you. Looks like the aggravation caused by repeated paper jams is behind me now. The only thing I'd mention to others trying this repair is that I had to punch in the code to get the 2ndary menu a few times (similar to what others have written). But once it appeared, the rest was straight forward.
thank you very much ... I was researching how to make the exchange and your video helped me a lot. I am from Brazil.
Big Thank you form Germany 🙏🏽
Excellent, thank you very much for the tutorial!!! It helped me a lot
Amazing video, great job. Even shows the part # to order!! Amazon $8.00
This worked - except I don't have a pickup roller replacement, but you can actually pull the retaining clip from the center of the pickup roller and then removed the rubber roller gasket material and invert it (turn it inside out) and then replace it on the roll and reinsert the center retaining clip. The rubber on the inside of mine was pristine and had good grip. After simply flipping the rubber gasket around it now grabs paper everytime. Getting to enter 2ndary service was tricky and took 3 or 4 tries before i got into it.
great - worked like charm
@@esshoul if you find it fails and stops gripping again, you can also re-invert back to the original side and try and re-align the rubber to get a fresher part of the rubber in contact. And if that doesn't work I have even considered cleaning it and brushing some fresh silicone caulking/sealant to it the next time it fails for me to get fresh grip (RTV 732 would be my choice)
Brilliant idea. I did it this way and it works. Many thanks.
Thanks a lot, it worked for me too ! This is awesome.
Thank you very much, the video help me to replace my pickup roll
Thank you 🙏🏽
Your Very First Laserjet
conkl001 Thank you SO MUCH! I was ready to throw this printer out. Your directions were very clear - I'll give it a try and soon as I order a new roller.
You are welcome!
پیروز باشید
고맙습니다 ^^
The tray that holds the cartridges in my printer that you’re showing on this site is stuck I cannot pull out the tray. Do you have any idea what I can do that I can fix this.
The right side of the cartridge door is stuck. I cannot open it. The left side is loose but not the right side. HELP
Manythanks!
Hello. I have tried repeatedly to reveal the 2ndary service on my HP printer and it’s not working. I also tried to remove the roller and there does not seem to be any way of releasing the roller. Any help would be greatly appreciated. I would love to get this great printer to work again. Thanks
我把凹在裡面皮的拉到外面，就能正常出紙了，不需換新
What about lower roller ( separation roller ) the small one ، How can I replace it?
Yes
@@Okipentv separation roller . It's different pro.@@Okipentv
感謝您的分享~~~
Thanks a Lot!
HELLO AND CONGRATULATIONS FOR THE VIDEO.
DESPITE I HAVE REPLACED THE ROLLER, THE PRINTER IN THE PRINTS OF MULTIPLE SHEETS TAKES ONE AND THEN BLOCKS.
YOU KNOW ME WHY. INFINITE THANKS
me funcionó!!!!!
The secondary thing isn't working
Try it again. Follow he taping point.
Slow and creepy. I do appreciate the information but, the slow motion weird music and lack of commentary made it seemingly like a serial killers video