You should be adjusting the coilovers by measuring from the ground to the fender. Keep in mind this has to be done on a flat, even surface like the garage floor. The coilovers will all be at different threads because of how weight is distributed on each corner. I had the same problem when I was trying to get the same height on all four corners and that’s what the alignment shop told me. Also look into corner balancing your car since you went with a track stance. Hope this helps!
Same. On my 2020 STi on the driver side is slightly more lower than the passenger side and I also measured it. Running 265/35r18 tires and rub only the drive side
@@chris_borges its probably due to weight of the car itself like the battery & other parts under the hood. On the left side its pretty much just the air intake
My sti do the same thing with the lopsided on the rear, but instead mine is .5 inch difference. I searched all over for this video and you only one who actually explained i! Really appreciate it🙏 I thought was just my car😭🤣
Absolutely FIRE!!! OMG!!! The STI is off the chain! I love it!!! How did you fit 275/'s on there with 18x10's??? I didn't think it could take such a wide set-up??! Very nice.👍💪💯
Car is looking bad ass! Those TE37 looks so nice on that car! I have a 2018 STi with BC Racing coil overs as well sitting on TE37. Yes my passenger side looks like it’s sitting higher than the driver side. I thought it was always my car or my suspension but now I know I’m not the only one. Haha.
I just read on a forum and supposedly it’s all like that. The way it’s built that everything is catered to the driver side like steering column and such. It bothers me but at least we are the only that noticed it haha. Most of the time when I’m taking a picture or recording my car I always do the driver side more than the passenger side.
yup! Same issue here on BC Coilovers. I used a caliper and the heights didn't match on my 09 Hatchback. Sounds like a common problem, but its an easy fix!
soo what’s the plan with the other wheels ? putting them on the FRS or keeping them maybe for the future? they do look really good tbh ❤ loved how the TEs came out with the new color just matches honestly
Bro! My 2016 WRX did the same thing with BC coil overs. Passenger back side, I had to lower it all the way down to come close to the driver side! I was freaking out!
Hey Chris, Quick Question, What's the exact model of these TE's are these the TE37SL or the TE37 Saga SL? Really love the look of these man, the car has came a long way since you started!
It rubs in the rear alot. Working on raising it right now actually LOL. Lip is pretty low but not as low as when I ran 245/35. 275s lifted the car higher a little bit!
Same issue with my 17 STi front passenger is higher than the driver side. Literally about to fix it today before I do the Whiteline Roll-Center & Bump-Steer Kit Sick ride bro
Same issue with my WRX. The rear right always sat just a little taller even with both coils maxed out. Had to go with drop LCA's to lower that side more.
I also have the same issue with the height! I thought I was the only one lol. Everything is adjusted the same but the passenger side still sits higher 😅
BMW’s are also higher on drivers side. Assuming when the driver is in the car seat, their weight will drop the driver’s side… squaring out the ride height.
STI looks soo good bro. The red is so hot dude. Just a thought, if you ever get bored of the FRS again, maybe once you get a shop/garage you could engine swap and film the whole process. It will probably take forever but that is endless content right there.
Hey Chris. Car looks very nice with those wheels. I actually need some advice. My 2021 STI just got dinged by some crazy lady in Malibu. My guess is you know some good body shops/car shops that do minor body work. I’m looking for the best possible quality shop in San Diego any ideas? Also my black 2021 STI I’m thinking getting black TE37s for the blacked out look. Nice video man. Hope to see your STI around SD
I know SOS Customz in Oceanside. They work a lot with modified cars. Other than that idk any off the top of my head. I’m sorry to hear that about your car.. Always annoying dealing with dings!
I have the same issue as well where my passenger rear sits higher than my driver side rear for my 21 wrx. I thought it was just me lmao. I’m on bc coilovers as well. Will def be fixing it when I get a chance.
AT a hundred bucks a whack for fuel, should have bought an e85 kit. My last fill up was $$23.76 and the e85 was on $1.28. Even regular unleaded was $3 something.
Better to use a rubberized dead blow hammer instead of a hammer on any auto components. BC's are GREAT I have them on my Nissan Spec V but I upgraded the springs to Swift springs which was a huge upgrade.
@@chris_borges Getting one made my life so much easier when working on the car. The funny thing is I was installing coilovers on the car and was hammering away on the rusted bolt and saw my neighbor laughing at me 🤣..... he then walked over and handed my a dead blow over the reg hammer I had...lol that shit was embarrassing. You're gonna love those BC's, funny thing is I'm installing Airlift on my 2011 STI in the next few weeks once my custom management mount comes in.
I have a bagged 15 wrx and have that same issue with the driver side sitting lower it drives me NUTS. Clean vid though bro subbed a bit ago and love the content, keep it comin❤
Chris thank u soOo much 4 ur reply sir I’ve had learn alot from u bro 😎 well not mechanical ⚙️ but about cars 🚗 I own a 2000 Honda civic it has 332334 miles I’ve been having it since 2014 n I love it so much I fill her up with $38 4 ⛽️ I’m from da Bay Area hopefully we can meet someday bro ur a amazing TH-camr n again thank u got the like n reply keep up the amazing videos
I appreciate the how-to videos as well. Clean cars , clean work , well spoken knowledgeable videos!! Keep the great work , we appreciate it.
This comment made my day! Appreciate it more than you know. 💯
This man don’t miss 👏🏼
🙌🏻❤️
I used to have a 2020 sti and i miss it alot, watching your videos about the your sti makes me still feel like i have mine 🤝🏻🙏🏻
You should be adjusting the coilovers by measuring from the ground to the fender. Keep in mind this has to be done on a flat, even surface like the garage floor. The coilovers will all be at different threads because of how weight is distributed on each corner.
I had the same problem when I was trying to get the same height on all four corners and that’s what the alignment shop told me. Also look into corner balancing your car since you went with a track stance. Hope this helps!
Good to know! I appreciate this comment big time! 💯
Same. On my 2020 STi on the driver side is slightly more lower than the passenger side and I also measured it. Running 265/35r18 tires and rub only the drive side
Interesting. 🤔
@@chris_borges its probably due to weight of the car itself like the battery & other parts under the hood. On the left side its pretty much just the air intake
absolutely crazy how the STI sits 🔥🔥
My sti do the same thing with the lopsided on the rear, but instead mine is .5 inch difference. I searched all over for this video and you only one who actually explained i! Really appreciate it🙏 I thought was just my car😭🤣
Glad you switched back to coils they look great with the new fitment 🔥☝🏼
Absolutely FIRE!!! OMG!!! The STI is off the chain! I love it!!! How did you fit 275/'s on there with 18x10's??? I didn't think it could take such a wide set-up??! Very nice.👍💪💯
The STI looks hella clean, honestly the TEs look wicked sick on it! Awesome video Chris! ❤
My man Denis! Appreciate you glad you like the setup!
Car is looking bad ass! Those TE37 looks so nice on that car! I have a 2018 STi with BC Racing coil overs as well sitting on TE37. Yes my passenger side looks like it’s sitting higher than the driver side. I thought it was always my car or my suspension but now I know I’m not the only one. Haha.
So curious to know why our cars sit like that. 🤔
I just read on a forum and supposedly it’s all like that. The way it’s built that everything is catered to the driver side like steering column and such. It bothers me but at least we are the only that noticed it haha. Most of the time when I’m taking a picture or recording my car I always do the driver side more than the passenger side.
yup! Same issue here on BC Coilovers. I used a caliper and the heights didn't match on my 09 Hatchback. Sounds like a common problem, but its an easy fix!
I’m digging the new look to the Sti, another banger 🔥🔥
thank you man!
Bro thanks for the digital caliper ! Don’t know why I never thought about using that when adjusting my coils
Sti looks great man can’t wait to see all the cars fully done in 1 picture soon👏🏽❤️
Appreciate the love bro 🙏🏻
Car looks absolutely amazing with the new wheels 😍
Thanks bro!
The new setup looks veryyy good!! 🔥 👀 curious to see if you like coilovers or bags more
appreciate it bro!
soo what’s the plan with the other wheels ? putting them on the FRS or keeping them maybe for the future? they do look really good tbh ❤ loved how the TEs came out with the new color just matches honestly
Not sure! 👀
@@chris_borges guess we’ll see 👀
Definitely the cleanest looking STI with the best color coordination that I've seen
Man this means a lot 🤝
@@chris_borges glad to hear, you deserve it with all your hard work
Looks so dope!
That lean is from the E-brake. Kinda hard to explain but you already found the easiest remedy. “Adjust the coil” 🤙🏼
E-brake does not affect suspension in any way shape or form.
🤔🤔🤔
Bro! My 2016 WRX did the same thing with BC coil overs. Passenger back side, I had to lower it all the way down to come close to the driver side! I was freaking out!
Thanks for the video ! I was stuck between running 265 or 275 on my wheel set up 18x10 +35 Definitely after seeing your set up will do 275
You’re gonna proly rub! I did a lot of trimming on my rear bumper and fender roll and still rub. Just beware. 😅
TE's looks CLEAN, also yeah of course one side of a car is gonna sit higher/lower, no high production passenger car has perfect weight distribution.
You made me like this type of fitment even more
Can't get over how nice the TEs look on it.
🥹❤️
Bruh everything from installing the bags and coils to the allotment is so relatable, even got the same wheel specs lol
Just saw the rest, even gas is relatable lol
🥹❤️
😮💨😮💨straight heat brotha!
appreciate it bro!
I believe the e210 corollas have the same issue, with the driver side being lower, just a little bit compared to the passenger side. My OCD!
What's up mane, why did you remove the air suspension? Sorry if this has been covered. And still watching the video by the way.
Hey Chris, Quick Question, What's the exact model of these TE's are these the TE37SL or the TE37 Saga SL? Really love the look of these man, the car has came a long way since you started!
Seems almost like a weight distribution thing regarding the height difference.
Bro! How is your friend doing! I wanna see him make that sick comeback with that new whip 😭 STI looking clean dude! 👏🏼
Soon 🫣
Love the setup….just curious…any rubbing? What’s ur dampening adjustment set to? How high would u say the lip is off the ground?
It rubs in the rear alot. Working on raising it right now actually LOL. Lip is pretty low but not as low as when I ran 245/35. 275s lifted the car higher a little bit!
Normal to have driver sides lower since driver weight is always on the driver side,I hate that too lol
I love seeing my brothers red fb6 civic whenever you go to RTA
Ayyy 🔥
fitment is dialed 👏 $95 is crazy to fill up an sti
Your car looks sick man. Wow. Super nice!
Thanks!!
I’m glad u went with those. That shi hittin
Appreciate that bro!
Looks good bro hopefully you stick with the coils lol i remember you went coils than air now back to coils
😅 Loving it so far!
Same issue with my 17 STi front passenger is higher than the driver side. Literally about to fix it today before I do the Whiteline Roll-Center & Bump-Steer Kit
Sick ride bro
Let me know if it fixes it! Message me on IG. 💯
I've never seen anyone run 275s on this car before, absolutely love this look!
So wide 😂
best setup so far on the sti
Heater bro! Bby looks absolutely nasty! 🔥
Same issue with my WRX. The rear right always sat just a little taller even with both coils maxed out. Had to go with drop LCA's to lower that side more.
😭😭
I also have the same issue with the height! I thought I was the only one lol. Everything is adjusted the same but the passenger side still sits higher 😅
Now I know it’s a common issue! Been bugging me though. 😅
Setup goes craaaaaaaazy. You actually don’t miss it’s nuts lol
means a lot bro 🥲
Love the super chill vibe in this video 🤙
Thank you bro!!
BMW’s are also higher on drivers side. Assuming when the driver is in the car seat, their weight will drop the driver’s side… squaring out the ride height.
🤔
The new setup looks amazing!!! Any scraping or clearance issues with being static?
Lots of rubbing with these 275s. Might have to downsize to 265/35z
last time u had 18x9.5+22 with 245 35? and looked so good i thought 10.5 would be to wide but
the STI looks sick😍😍😍, but would maybe look more aggressive with the white wheals, I may be wrong
I think you made the right choice mixing it up, STI is a looking 🔥🔥🔥
Appreciate it bro! Rubs like crazy though.
@@chris_borges Running 275/35s? 🤔
STI looks soo good bro. The red is so hot dude. Just a thought, if you ever get bored of the FRS again, maybe once you get a shop/garage you could engine swap and film the whole process. It will probably take forever but that is endless content right there.
Stay tuned. 🫣
excited to see the new body kit!@@chris_borges
Hey just curious how’s the drive with these coils?
The New Wheels Set Up Looks 🔥
Thanks bro!
fitment in point ❤
yessir! 💪🏼
Looking good homie! You ever consider installing aero spats to the car?
I haven’t but i’m open to it 💯
Hey Chris. Car looks very nice with those wheels. I actually need some advice. My 2021 STI just got dinged by some crazy lady in Malibu. My guess is you know some good body shops/car shops that do minor body work. I’m looking for the best possible quality shop in San Diego any ideas? Also my black 2021 STI I’m thinking getting black TE37s for the blacked out look. Nice video man. Hope to see your STI around SD
I know SOS Customz in Oceanside. They work a lot with modified cars. Other than that idk any off the top of my head. I’m sorry to hear that about your car.. Always annoying dealing with dings!
so good bro
🤝❤️
From Florida clean car and setup 👍🏽👍🏽👍🏽👍🏽🔥
TE’s look sooo good 😮💨😮💨 I got the same problem on my WRX too
🙏🏻💯
I have the same issue as well where my passenger rear sits higher than my driver side rear for my 21 wrx. I thought it was just me lmao. I’m on bc coilovers as well. Will def be fixing it when I get a chance.
It bugs me but i’ve been just adjusting one side lower..
That what happen to my friend wrx we had to lower both front and rear passenger side more.
Damn the STI Looks good. Love the Track stance fitment !
Loving the track setup so far!
I had that same coilover issue with my car but I had a 2004 mitsubishi lancer ralliart
AT a hundred bucks a whack for fuel, should have bought an e85 kit. My last fill up was $$23.76 and the e85 was on $1.28. Even regular unleaded was $3 something.
e85 over here is 3 almost 4 dollars 😂
@@chris_borges wow! Really! Do you get 97 or higher octane. We get 93 as premium.
Cleann!!👌🏾🔥Motivational as well to get some nice wheels and coilovers!🙌🏽
Thank you big time bro!
The new set up looks🔥🔥
Appreciate it!
My Miata does the same thing driver side higher than passenger
Better to use a rubberized dead blow hammer instead of a hammer on any auto components. BC's are GREAT I have them on my Nissan Spec V but I upgraded the springs to Swift springs which was a huge upgrade.
💯 I’ve been needing to get a rubber mallet
@@chris_borges
Getting one made my life so much easier when working on the car. The funny thing is I was installing coilovers on the car and was hammering away on the rusted bolt and saw my neighbor laughing at me 🤣..... he then walked over and handed my a dead blow over the reg hammer I had...lol that shit was embarrassing.
You're gonna love those BC's, funny thing is I'm installing Airlift on my 2011 STI in the next few weeks once my custom management mount comes in.
How are spec d tail lights? Any issues with them? Thinking about getting them for my WRX…
These are the subispeed tr style tails! I love them no issues.
did you forget the rear tail light resistors when you installed? i just saw when you had the signals on they were really fast
Haha yes. I like the fast blinking. 😅
I have a bagged 15 wrx and have that same issue with the driver side sitting lower it drives me NUTS. Clean vid though bro subbed a bit ago and love the content, keep it comin❤
Same bro it annoys me. 😭 Oh well. But I appreciate the support big time!
sti is looking fire bro.. sheeessshhh!!
appreciate that! 💯
Hey bro love ur videos ur cars r dope I was wondering 💭 u don’t like the imported cars like the s14 or fC or FD skyline or Toyota chaser
I do! I’d love to hop in one of those in the future.
the wheels looks so good and the red wowwwwww
🙏🏻
This is soooooo clean! 😮😮😮😮😮
Means a lot bro!!
Definitely ls swap it 🔥.
I have an ls swapped e36 I'm about to refresh the engine. Been smoking since I got it
Sheeeesh 👀🔥
love the new setup chris!
thank you big time!
1:49 question if you’re spending all that money in TE37’s why cheap out and get ZR10’s and not CE28SL’s or CE28 Clubsports I think it is
My 2023 brz same thing. I found out before I put my new set of wheels 😅
Bruhhh. I had poke issues with my BRZ! Passenger side pokes out way more than driver side.
@@chris_borges: oh shoot I haven’t check mine lol. I’m still on a stock rca. Love your videos bro! 🇵🇭💙
Fitment goals!!!
💪🏼💯
Fuego!!!!! 🔥🔥🔥🔥🔥
One side is lower most likely because of the gas tank location.
Chris I think 💭 4 ur next car should be a Skyline or or S14 for the project car or a s13 any of these but RHD
Chris thank u soOo much 4 ur reply sir I’ve had learn alot from u bro 😎 well not mechanical ⚙️ but about cars 🚗 I own a 2000 Honda civic it has 332334 miles I’ve been having it since 2014 n I love it so much I fill her up with $38 4 ⛽️ I’m from da Bay Area hopefully we can meet someday bro ur a amazing TH-camr n again thank u got the like n reply keep up the amazing videos
Addicted to Chris Borges videos
🫣❤️
Not me trying to save for bags and this man swapping to coils
I have the same issue with my 17 Wrx with bags, the rear is sits higher than the front. It always bothered me 😭
So underrated Chanel 💯🙌🏻
Means alot 🙏🏻
My friend told me it’s the 😊E brake so it lifts one side Same problem I hate it
Interesting…
Dang that STI sounds too good!
🔥🔥🔥🔥
How much did you drop the car from stock?
RIP your front splitter callin it now.
chillll 😂
@@chris_borges hahahaha 😂
Let's goooo frs gonna go back on air. If you change it imma cry again 😢
😅😅
crazy my 05 forester is the same it’s slightly higher on one side but it’s literally same all around as well still haven’t got an alignment tho
People been saying it’s the gas tank or e brake.. Not sure but that’s what i’ve heard!
Goat 🐐💯 Keep up the bangers bro!
Thank you! 🙏🏻
Fitment too fucking fire god damn👌👌
🤝🔥
What size tires you running on the stockies ? Asking for a friend 🤣
I believe they’re 245/35!
Sheesh our gas is $4.45 for 93 and my full tank is 65$ , thinking over here was expensive compared to your gas price, now I’m thankful
$3.20/gal in ATL.
Mbn 😂😂😂😂
A beauty bro 🔥
means a lot bro!