Making a Bowl on a Mitre Saw? | Is it Safe & Efficient?
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Making a Bowl on a Mitre Saw? | Is it Safe & Efficient?
In this video I will attempt making a wooden bowl on a mitre saw. We will see if this method is safe and efficient and if this could be an answer to those that don't have a lathe but want to make a bowl.
My videos on the cordless mitre saw from Evolution:
-Evolution Mitre Saw - How Accurate is it Straight out of the Box? Plus Mitre Saw Tune Up! - • Evolution Mitre Saw - ...
-Evolution Cordless 36V Double Bevel Mitre Saw | Full Assembly & Features - • Evolution Cordless 36V...
Shopping for Evolution tools - My discount code works on all products on Evolution website and its 10% off - CASUAL
- Evolution Cordless R255SMS-DB-Li 255mm 36V Double Bevel Mitre Saw - no batteries - shop.evolution...
- Evolution Cordless R255SMS-DB-Li 255mm 36V Double Bevel Mitre Saw - with a battery pack and charger - shop.evolution...
- Evolution R255SMS-DB+ 255mm Double Bevel Sliding Compound Mitre Saw - Corded version - shop.evolution...
- Evolution XL Rolling Mitre Saw Stand With Universal Fittings - shop.evolution...
- Evolution Cordless R255SMS-DB-Li Double Bevel Mitre Saw & XL Stand - shop.evolution...
Dedykowany sklep Evolution jest już w Polsce!!!
Kupon ze zniżką 10% - CASUAL
Polska strona Evolution - sklep.evolutio...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#smallworkshop #woodworking #mitresaw
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.
For sanding the inside, I was able to make a jig to fit on an old orbital polisher that allows me to screw into the portions I intend to remove from the bowl, spin the entire square piece & sand the bowl cavity much like sanding a piece on a lathe. It was very efficient.
@@toddvail2630 interesting idea
@CasualDIY I always try to work with what I've got. The time difference between hand sanding and using my creation was astounding. Total sand time with it was down to roughly 15min.
@@toddvail2630 that's not bad at all
Fantastic explanation 👏
Thank you for watching 👍
Seen round shapes cut using your nail technique on a table saw using a cross cut sled
Seen that however I felt that was quite dangerous but I may try to attempt it one day 😅
Great video. I don't have a mitre saw unfortunately. I've seen bowls cut on a table saw but it involves a fairly complex jig. I personally have cut many circles on my table saw with my crosscut sled and if you follow basic precautions it is pretty safe and easy. WoodworkWeb has a good video using this method. I much prefer this to using a router to cut circles. Also if you want to add a large champher to the bottom of your bowl that is also easy by tilting the blade.
@@dougggiereid the chamfer was exactly what I was thinking
@@dougggiereid I think I have to try it 🤔
I love it and I'm definitely going to do this...👍
👍 You nailed it my friend. Thanks again just watched the full video and the adverts for the floor mop,🤣
Hehe thank you for watching
What could ever go wrong
There is always a potential for something to go wrong if you are not careful
I'm scared now. I didn't know making a bunch of depth cuts on a more secure surface would be this frightening but here we are. /s
The nail/dowel reduces the chance of the piece moving forward or backward while cutting and you can use a push stick if you're worried about fingers. Who really needs all ten anyway? I figure a thumb and two others are more than enough, so we have two extra on each hand! (Unless you've already used up your spares. In that case you might want to pass on this project, and woodworking all together😂)
@@XSR_RUGGER nowadays you can just 3d print new ones 🤣
@@CasualDIY TRUE! There's a guy on this ole ewetoob that has made a mechanical set of fingers for himself as he's missing all but his thumb (if I remember correctly).
They articulate and everything. Looks like the hand of the T-800 hand in Terminator 2.
@@XSR_RUGGER I think I seen that as well
Excellent!
Beautiful work, Tomasz! It really turned out fantastic! 😃
Stay safe there with your family! 🖖😊
Thank you mate 👍
You could have cut the outside on a tablesaw.
To sand the inside, use a sander pad to your drill.
I was thinking of using the table saw for it but then I thought that there would be too many sketchy techniques in one video😅
Brilliant! What a great project, I really enjoyed that one Tomasz, so much so I think I need to check what timber I have… 🤔 ✅
I reckon SWMBO will love one of those (need to check my band saw’s capability too) thank you for sharing this one… 👍🏻 👀
Thank you for watching 👍
Well yet again you surprised me, I was almost sure that you were going to use the mitre saw on a bevel to give the outer a taper in top to bottom.
Nice video, I like the bowl so much that I'm going to give it a go myself with a nice piece of oak that I've had laying around for quite some time, the oak was laying around in my Dad's workshop until he passed 17yrs ago & it was in there long before, I remember him bringing it home, I was about 14/15yrs old, I'm now 68yrs old, the bowl will be (if all turns out well) a tribute to my Dad ❤
Well that's a fantastic tribute 👏
I'm thinking of expanding the jig so it will tackle more options. We will see how it will all go 👍
@CasualDIY I look forward to improvements/additions to this chopsaw jig.
Wo that's pretty good. It's amazing 👏
Thank you
Tomasz, A fantastic video! I was surprised how good that technique proved to be to make a lovely bowl without a lathe. It gives us hope that you don't need a lathe! ☝
I was super surprised myself. I thought it will be a bit iffy but if you setup everything carefully and correctly this is a doddle.
This awesome. Just amazing. I've never seen something like this before. I'm definitely going to try this one day. The only problem is, that my to-do and to-try list is growing
by the day. I'm curious if somebody comes with a good solution for sanding the inside not by hand (attachment to a random orbit sander???)
Thanks for sharing the video.
I'm still waiting for some good recommendations on the sanding aspect🤔
Brilliant idea dude! I know it wasn't your initially but the way you presented it was easy and inspiring. I might be doing one myself lol! Thank you!
Go for it, it's actually a very fun project 👍
Boo, I was thinking you’d cut the entire bowl on the mitre saw, was curious to see how you’d managed it.
Nice but messy job, the end result looks lovely
I may try to do that actually and if it will work then I'll post another video on it.
It’s amazing what you can do with the tools you already own. Luckily I picked up a used lathe a few years ago for a low price.
Lathe is the last tool I'm missing in my workshop. I'll get one eventually 😅
@@CasualDIY You really have a lot of tools already, but I don't think the lathe is the last tool you are missing. We'll see in a few years. 😀
@@hansdegroot8549 😄👍
great idea well done
Thank you for watching
I bet you could do the outside edge with the mitre saw too: slide your jig over to one side, and make loads of full depth cuts.
Yes I think I'll try to do that as well