Hi there! Loved your explanation but i have a question. I want to color my hair blue and purple and i bleached my virgin black hair using blue bleach powder with 30 Vol developer. After bleaching i now have mixed shades of blonde orange brassy brown hair strands. I know i have to rebleach my hair so i bought another tub of bleach and it by mistake turned out to be the white bleach powder. Now would you suggest to use the white bleach powder with 30 Vol developer to remove the orange brassy brown strands?
Nomana Khanam Samia so blue and purple works well on level 8-9 .. you can bleach with the white powder with 30 vol developer. Now your hair with orange it’s at 6.5-7.5 . Do you have 20 Vol developer ?
Nomana Khanam Samia no worries on that, you can just abit of warm water into the bleach with 30 developer to weaken the strength. How long is your hair btw?
Yes it is more stronger on Caucasian hair. But not for Asian hair. As Asian hair have more yellow pigment. I have use most of the European brand that salon uses. The first bleach tend to always stuck on level 8.5 for 12% at 1 hour mark.
Hi, I have a question. My hair was previously box dyed a bright red and then dyed over with multiple brown box dyes - my hair is now a medium brown colour with orange undertones. Which bleach powder and developer would you recommend and how long would I leave it on for? I am hoping to achieve a icy blonde (using toner) Thank you so much
Your are welcome. For me, I will bleach the hair till level 8.5 brown. It should still have orange undertones. I would rinse the hair. Use green acid plus bleach apply those hair that have orange undertones. Once the orange undertones have turn brown blonde without any orange hues. Bleach the hair again till you achieve a level 9.5
Thank you so much for your kind support and efforts. Please need a way to remove hair toners made by hair dye my hair is already damaged What is the less damage for this case is it bleach bath or using something else also if there is any tips added to prevent any further damage 🙏
Thank you for the support. The lesser damaged for artificial tones is shampoo plus bleach plus water .. but it can only get rid of the tones .. can’t lightened hair
Very useful video thanks. Would u recommend to use white bleach with 30 volume on level 3 or 4 virgin hair for 40 min to achieve level 9? Is this possible?
It can be done, but still have to see her own pigmentation. For me I will apply white bleach from root to end, 1cm away from scalp. Wrap the head with cling wrap and wait for an hour or 90 min.
@@sebastian-chan-cc.education I have been using Schwarzkopf Blond Me + 30 vol. After seeing your video I decided to try the white powder. I can't find the brand that you are using here, in Turkey. What do you think about Affinage Lite white powder bleach? The guideline recommends using 10 or 20 vol for scalp retouch which is ridiculous to me haha. Cause 10 vol doesn't have any lifting effect, only use for deposit colour purpose as I know.
I recently did a color remover to remove black box dye from a few months ago, my hair is now brownish. I’m wanting to go to a golden/ honey color. Is it safer to use blue beach (with 40 or 30 developer) rather than white & then tone it w/ a blue-violet one? & of course 20 developer for roots since its virgin.
Both blue bleach and white bleach is able to bleach your current hair. Try to use 20 developer. Is not about which bleach you use. Is about which developer you use.
@@caliyanthompson4541 yes, cos you need to bleach several times due to artificial pigments are still within the hair. And if you use such high developer. The hair will break first before the pigment will be erased.
@@desireecorpuz524 for me there is nothing wrong with the product, it is still depends on the hair texture and the porosity of the hair. Virgin or chemically treated before. And it still comes to the peroxide you choose. Hope it helps.
Hii, i have black roots that have grown out and the r3st is dark brown with warm tones in it. I want to make it pretty light blonde can you pls give me some advice?
Hi, first you have the bleach out the artificial colour first. Till u see the artificial colour turns to level 8 blonde. Than, You can bleach the roots
Depending on your liquidity of your developer, if the developer is watery .. ratio would be developer to bleach (1.5 : 1). If the developer is creamy .. ratio would be developer to bleach (2 : 1)
Hello! my hair was previously dyed black and then I lightened it to a ginger/strawberry blonde kind of colour, the insides of my hair have been bleached before so those pieces have lightened into a regular blonde and so have my roots, its pretty patchy but my hair isnt straight so unless you examine my hair it looks fine and the different shades look intentional, my goal is to get it to an evened out monotone silver/grey colour, can I request some tips with how to proceed?
Let me rephrase, your hair had be lightened to different shades of 6,7 and 8? If to Grey, I would suggest you have to lightened all into one shade which is level 8 first before doing anything
@@sebastian-chan-cc.education I will try doing that! it didnt come out uneven on purpose, just happened cus ive been putting it through alot-- I took a 3month break from doing any chemical stuff to it before I started lightening again though to minimize chances of breakage
Very helpful i have subscribed i always use blue but I can never get 613 colour! So shall I try white bleach and then blue or white only ? I have 30vol developer and 40vol.
@@sebastian-chan-cc.education hello thanks for your reply, its like a very blonde colour almost like the colour you got with the white bleach maybe one or two shade lighter
Wish I saw this before I washed the bleach out of my black hair after half an hour. I now have the ends very pale yellow, almost white, but the roots are a light bronze and purple shampoo won’t work 😩
Hi I have natural 1 b hair color virgin hair and I want to bleach my hair to a 613 blonde color, what bleach do I use and what developer is the best to use? New subscriber 😊
@@sebastian-chan-cc.education Actually recently I have done my hair bleached and I guess it's level 9 so now was planning for Platinum or icy colours to do on my hair
9.1 or 10.1 + 0/11 (ash) + 0/66 (purple) + 3%. The percentage to put ash and purple is very little, about 1-2 % out of 100g of 9.1 or 10.1. May I know the length of your hair?
@@sebastian-chan-cc.education so am i gonna bleach my hair twice, and for the second time i'm gonna add the conditioner along with the bleach and 12%?? am i right??
@@rosemariemercado5641 yes, wash out the first time with shampoo and conditioner .. apply the second step on damp hair .. the ratio of the formula .. 12% (1) + bleach (1) + conditioner (1)
You can apply 12% + white bleach or blue bleach on damp hair if you are doing it yourself. The second time after you rinse the hair. Apply 9% + bleach, and you will reach to level 8.
Hi New Subscriber here ❤️ I have a question hope you can answer it. I want to achieve a perfect White hair color but currently my hair is Light blonde for 3 weeks what should I do? Can I bleach this again if I can then how many times should I bleached this and what is the right bleaching powder should've use Blue or white?
Hi i want to bleach my hair because i want to achieve very light ash blond hair color and my hair color right now is brown which bleach i will use? White or blue 😁 Plssss answer thankyou in advance ❤
Hi. I'm planning to bleach my hair with white bleach (12%) then color my hair with the Loreal Excellence Ash Supreme 7.17. How many days before I can color my hair after bleaching it? Btw, it will be my first time bleaching my level 5 hair. Thank you
@@sebastian-chan-cc.education Thank you! I have doubts before if I need to wait 1 week before coloring my hair because of the other videos I have watched.
@@alyssacarlapernecita4783 as you said your current hair is level 5, using 12% bleach will lead to level 8.5-9 .. I was thinking you use 9% will be sufficient .. where will you be doing at ? At home or salon ? If your atmosphere if humid and warm .. do not pile the bleach together as it will generate heat
Hello , i want to bleach all my natural dark brown hair to light blond, and some traits of the ends of my hair are already bleached to light blond , and im sceard to damage its cuz i want to make it all blond , what do you advice me to do 😣😣😣
You bleach other parts of the hair and not touching the ends. If you are scared that you might accidentally touch it .. you can apply those light blonde area with conditioner first.
Do i need to put some foil on bleaching my hair? Its been my 3rd time bleaching it but some parts of it are still on level 6 like golden brown or bright rust color but on the inner layer of my hair its almost blonde its just that outer part is still diferent on color what should i do?? Thanks btw im planning to color silver grey.
The result of these is due to overlapping, you might want to stop bleaching the inner part and get the surface level 6 to bleach it to the same inner part shade before you continue bleaching the rest. Once you bleach the surface to the same level to inner, you could wash and condition the hair, and bleach one more time on wet hair. I would suggest to leave some gap in between in the inner area. And bleach from top to bottom.
You could put yourself not under air con room too much Because low temperature would slow bleaching process. Overlapping will increase temperature, doing that will break the hair very fast.
Hope u do reply my comments. I bleached my hair with 9% developer 5days ago... it became orange not verry yellowish. May i know here? How many times i need to apply the bleach with 9% again? Or i may take the other cream color from drugstore for third color apply for make it look lighten white? Hopefully helpful 😌
I have videos on this under bleaching surprise. You can add with vinegar and water.. not direct vinegar to bleach as it cause a smell that is harmful to our bodies
@@applesyrup2402 would try one day. The purpose of the videos is to find ways when you met some difficulties in the salon. And we are so rely on some products, without them we can’t achieve some of the results.
I got severe acne within one week of applying bleach on just test section at the back of my head... I wanna do more but too scared to try 😭 I already bought everything.. and it didn't even touch the scalp
Please stop bleaching till ur acne heals. You bleach too close to the scalp and due to overlapping it heats up and burns ur scalp. What is the peroxide you are using right now?
@@sebastian-chan-cc.education i used keune bleach and it didn't touch my scalp... I don't know what went wrong.. i used 30vol and 2:1 and waited for an hour.. i didn't touch roots only a test patch
@@AmzPixie you might want to try to do 1.5cm away from scalp. And try not to put too much bleach on the root area. You can apply bleach onto root area and comb it away the excess. This will not develop burn 🔥 easily
Because of you and others like you people with damage hair would think they can leave bleaching product on their hair for 1 hour and more , if they don’t like the result… hairdressers must follow the manufactures direction on a product I have never see bleaching powder say an hour … please people check your hair to see if its porosity/ breaking off remember this demo is being done on extentions
Yes is true you have to check the manufacturer instructions. If you use 6% and below, you are able to leave more than an hour on virgin hair. Of cos, chemical processed hair not advisable. Never say on the product does not meant that it cannot be done. If you want to do, have to do with caution.
Bleach powder can be apply on skin . But is the peroxide that matters. 6% and below can be apply on scalp or skin. Not for 9% or 12%, if apply it will feel burned.
@@sebastian-chan-cc.education i wasted my money and time 😭😭 I used gray colour in my hair but it didnt worked bcoz i added shampoo instead of developer
All bleaches will cause breakage. Expensive brands and cheap brands will cause breakage. Is the process that you mix in the bleaching powder, example; the peroxide percentage, or did you put any olaplex or bondplex in it to weaken the power of the bleaching powder? Or you can put conditioner in it too. And most importantly apply on wet hair to prevent excessive heat produce on the scalp.
Hi love the video! But I have wavy/curly hair that's medium brown with natural red highlights and want to bleach a part of my hair and was wondering if I should use white or blue and what developer? My friend suggested 30 v but I don't know if that would damage my hair too quickly before lightening it enough
@@sebastian-chan-cc.education no problem (: no the only thing I've done is dyed it red abt a year and a half ago but it was semi permanent dye and almost all that has been cut off.
@@carenarose6037 ok I assume is virgin hair, if your hair is fine texture, using 30 v within an hour from medium brown will turn to level 8.5 - 9. If your hair is coarse texture, using 30 v within an hour will turn to level 8-8.5. If you use heat or expose to sun, it will break.
![[How To Colour Hair] #16 Adding Bleach Cream Into Bleach Powder](http://i.ytimg.com/vi/dEH1vL4MVTk/mqdefault.jpg)
holy s- you're generous enough to reply to all these comments😭😭 i love it! thanks bro
Thank you, if you have any questions. I am happy to reply.
You deserve more followers. Many vloggers dont answer question.. Thank you for sharing.💕
Thank you, any ways I can get more followers?
Wow that's actually a pretty significant difference. Thank you for making this video
Thank you for watching
Hey future colorist here.. keep up the great work..
Fre'Neashia Campbell thank you
Plss show us these on dyed casting hairs as in our state ppl mostly use casting pouch colors how to fix them properly
Will consider thank you 🙏
Hi there!
Loved your explanation but i have a question. I want to color my hair blue and purple and i bleached my virgin black hair using blue bleach powder with 30 Vol developer. After bleaching i now have mixed shades of blonde orange brassy brown hair strands. I know i have to rebleach my hair so i bought another tub of bleach and it by mistake turned out to be the white bleach powder.
Now would you suggest to use the white bleach powder with 30 Vol developer to remove the orange brassy brown strands?
Nomana Khanam Samia so blue and purple works well on level 8-9 .. you can bleach with the white powder with 30 vol developer. Now your hair with orange it’s at 6.5-7.5 . Do you have 20 Vol developer ?
@@sebastian-chan-cc.education thank you for replying back so fast and shoot i do not have 20 Vol developer :(
Nomana Khanam Samia no worries on that, you can just abit of warm water into the bleach with 30 developer to weaken the strength. How long is your hair btw?
I think its depend of the brand that you use , bcause mostly the blue powder its most stronger than the white ona
Yes it is more stronger on Caucasian hair. But not for Asian hair. As Asian hair have more yellow pigment. I have use most of the European brand that salon uses. The first bleach tend to always stuck on level 8.5 for 12% at 1 hour mark.
Hi, I have a question. My hair was previously box dyed a bright red and then dyed over with multiple brown box dyes - my hair is now a medium brown colour with orange undertones.
Which bleach powder and developer would you recommend and how long would I leave it on for?
I am hoping to achieve a icy blonde (using toner)
Thank you so much
Your are welcome.
For me, I will bleach the hair till level 8.5 brown. It should still have orange undertones. I would rinse the hair. Use green acid plus bleach apply those hair that have orange undertones. Once the orange undertones have turn brown blonde without any orange hues. Bleach the hair again till you achieve a level 9.5
Thank you so much for your kind support and efforts.
Please need a way to remove hair toners made by hair dye my hair is already damaged
What is the less damage for this case is it bleach bath or using something else also if there is any tips added to prevent any further damage 🙏
Thank you for the support. The lesser damaged for artificial tones is shampoo plus bleach plus water .. but it can only get rid of the tones .. can’t lightened hair
Very useful video thanks. Would u recommend to use white bleach with 30 volume on level 3 or 4 virgin hair for 40 min to achieve level 9? Is this possible?
It can be done, but still have to see her own pigmentation. For me I will apply white bleach from root to end, 1cm away from scalp. Wrap the head with cling wrap and wait for an hour or 90 min.
@@sebastian-chan-cc.education I have been using Schwarzkopf Blond Me + 30 vol. After seeing your video I decided to try the white powder. I can't find the brand that you are using here, in Turkey. What do you think about Affinage Lite white powder bleach? The guideline recommends using 10 or 20 vol for scalp retouch which is ridiculous to me haha. Cause 10 vol doesn't have any lifting effect, only use for deposit colour purpose as I know.
@@estherhirch schwars bleach is quite strong .. it should work, I use before. My product is from China.
@@estherhirch yes 10 vol have no lifting effect but it still can be bleach using it. With bleach it can lift max 2.5 level with heat.
@@sebastian-chan-cc.education Yes, it is. I'm just experimenting with different products. Thanks.
which volume of developper did you use for both instances? I found your video very interesting.
I use 9% .. sorry not able to show the product.
Hii can you tell me plz If I want to make white color which color bleach is better
Hi, may I know what is your current hair colour? Are your hair virgin or have artificial colours ?
I also want to have a silver white color. I have a virgin black hair. Which one should I use? Thank you.
@@stephanieoo4895 I will choose the white bleach.
@@sebastian-chan-cc.education Thanks a million 😍😍
@@stephanieoo4895 you are welcome
I recently did a color remover to remove black box dye from a few months ago, my hair is now brownish. I’m wanting to go to a golden/ honey color. Is it safer to use blue beach (with 40 or 30 developer) rather than white & then tone it w/ a blue-violet one? & of course 20 developer for roots since its virgin.
Both blue bleach and white bleach is able to bleach your current hair. Try to use 20 developer. Is not about which bleach you use. Is about which developer you use.
@@sebastian-chan-cc.education Even with my hair being super thick? Thank you so much btw.
@@caliyanthompson4541 yes, cos you need to bleach several times due to artificial pigments are still within the hair. And if you use such high developer. The hair will break first before the pigment will be erased.
@@sebastian-chan-cc.education Awesome, thank you for your help!
@@caliyanthompson4541 you are welcome
Can i mix the blue and white bleach at the same time?
Yes you can
@@sebastian-chan-cc.education thank you!!!
@@liehanna.9230 welcome
Hello, are you familiar with bremod and colisi brand of bleach hair sets? Which one do you think is better?
Both brand I never use before. But I know that colisi is blue bleach .. what colour is bermod bleach ?
@@sebastian-chan-cc.education I think it is also blue
@@desireecorpuz524 for me there is nothing wrong with the product, it is still depends on the hair texture and the porosity of the hair. Virgin or chemically treated before. And it still comes to the peroxide you choose. Hope it helps.
Hii, i have black roots that have grown out and the r3st is dark brown with warm tones in it. I want to make it pretty light blonde can you pls give me some advice?
Hi, first you have the bleach out the artificial colour first. Till u see the artificial colour turns to level 8 blonde. Than, You can bleach the roots
what's the ratio should be on powder and developer? for example should I use 500 grams bleach powder with 100 ml oxidizing cream?
Depending on your liquidity of your developer, if the developer is watery .. ratio would be developer to bleach (1.5 : 1).
If the developer is creamy .. ratio would be developer to bleach (2 : 1)
@@sebastian-chan-cc.education Thank you So much!
@@HouseAncero welcome
Hello! my hair was previously dyed black and then I lightened it to a ginger/strawberry blonde kind of colour, the insides of my hair have been bleached before so those pieces have lightened into a regular blonde and so have my roots, its pretty patchy but my hair isnt straight so unless you examine my hair it looks fine and the different shades look intentional, my goal is to get it to an evened out monotone silver/grey colour, can I request some tips with how to proceed?
Let me rephrase, your hair had be lightened to different shades of 6,7 and 8? If to Grey, I would suggest you have to lightened all into one shade which is level 8 first before doing anything
@@sebastian-chan-cc.education I will try doing that! it didnt come out uneven on purpose, just happened cus ive been putting it through alot-- I took a 3month break from doing any chemical stuff to it before I started lightening again though to minimize chances of breakage
@@jeanlee3941 in order to make it easier to lighten , best for it on damp hair, start on the darker shade to the lighter shade.
@@sebastian-chan-cc.education which volume developer would you recommend? thank you for the replies!
For me, for the darker shade I would use 9% on damp hair, and on the lighter shade I would use 6%
Very helpful i have subscribed i always use blue but I can never get 613 colour! So shall I try white bleach and then blue or white only ? I have 30vol developer and 40vol.
Thank you for subscribing, may I know what is a 613 colour
@@sebastian-chan-cc.education hello thanks for your reply, its like a very blonde colour almost like the colour you got with the white bleach maybe one or two shade lighter
What is the current hair colour ? Black or brown ? Have you done any other colour? Is it virgin hair ?
@@sebastian-chan-cc.education hello there it is virgin hair natural black/1b virgin hair like the colour you started with
I would use white bleach 2 time , 1 time blue bleach than use 613
Wish I saw this before I washed the bleach out of my black hair after half an hour. I now have the ends very pale yellow, almost white, but the roots are a light bronze and purple shampoo won’t work 😩
Yes, purple shampoo will only work on pale yellow, at around level 9 at least.
Yellow is best blonde hair colour
Agreed .., but i love to apply till WHITE on mine.
can i use bleach developer for color cream developer? are they the same?
Yes you can .. both should be peroxide’s …
@@sebastian-chan-cc.education thanks!
@@noqi5177 welcome
Hi I have natural 1 b hair color virgin hair and I want to bleach my hair to a 613 blonde color, what bleach do I use and what developer is the best to use? New subscriber 😊
Thank you for subscribing. White or blue bleach is able to bleach to level 613. 9% will do the job.
Hey i want to achieve light ash color . I have virgin black hair what should i do ?
First you need to bleach your hair till level 9 .. than shampoo and rinse off. On damp hair apply your desired colour
I want to color my hair silver can you plz tell me how I can do it????
Hi, what is your definition of silver? As there are different views of silver.
@@sebastian-chan-cc.education Actually recently I have done my hair bleached and I guess it's level 9 so now was planning for Platinum or icy colours to do on my hair
9.1 or 10.1 + 0/11 (ash) + 0/66 (purple) + 3%. The percentage to put ash and purple is very little, about 1-2 % out of 100g of 9.1 or 10.1. May I know the length of your hair?
@@sebastian-chan-cc.educationIt's long
Ok, so every 130g of 9.1 or 10.1. Add 3g of 0/11 & 1g 0/66. Do on wet hair for better control
I want to achieve ash grey, i have a virgin black hair, but i only have blue bleach what should i do?
No worries .. ash grey no need to bleach too intense .. blue bleach is able to achieve. What percentage or vol of peroxide do you have
@@sebastian-chan-cc.education 12%
@@rosemariemercado5641 you could bleach 1 time with 12% and another time with 12% + bleach + conditioner and than able to do the ash Grey
@@sebastian-chan-cc.education so am i gonna bleach my hair twice, and for the second time i'm gonna add the conditioner along with the bleach and 12%?? am i right??
@@rosemariemercado5641 yes, wash out the first time with shampoo and conditioner .. apply the second step on damp hair .. the ratio of the formula .. 12% (1) + bleach (1) + conditioner (1)
I have virgin level 2 darkest brown hair and I want to go to level 8 or 9, what do I use?
You can apply 12% + white bleach or blue bleach on damp hair if you are doing it yourself. The second time after you rinse the hair. Apply 9% + bleach, and you will reach to level 8.
@@sebastian-chan-cc.education thank you so much!!
@@2002zz welcome
If it safe to use bleach after dye hair using box dye?
Yes it ok to use bleach. I cannot tell you it is safe as I did not personally seen the hair myself.
I have very dark 4b hair, can I use blue Activex bleach with Real Skin 30v developer to go platinum blonde?
Yes you can, but to platinum you need to bleach 2 times at least. If not it will still be golden after you bleach one time.
@@sebastian-chan-cc.education thank you so much for the hasty response!!!
@@michellemuraya7171 no problem
Hi New Subscriber here ❤️ I have a question hope you can answer it.
I want to achieve a perfect White hair color but currently my hair is Light blonde for 3 weeks what should I do? Can I bleach this again if I can then how many times should I bleached this and what is the right bleaching powder should've use Blue or white?
Have you watch the latest video ?
Your light blonde is level 8 or 9?
@@sebastian-chan-cc.education level 8
@@clyderzaulda2404 I will bleach one more time with white bleach using 9% than blue bleach 6%
Hi i want to bleach my hair because i want to achieve very light ash blond hair color and my hair color right now is brown which bleach i will use? White or blue 😁
Plssss answer thankyou in advance ❤
White bleach, and currently which brown are you in ?
Medium brown
@@leanaguiamalontukan6270 can bleach either 2 times 6% or 1 time 9% . Depending on the damage of the hair
Thankyou so much for your response 😊 I'm your new subscriber
@@leanaguiamalontukan6270 thank you for the support. And share your learnings to your friends .. thank you once again
Hi. I'm planning to bleach my hair with white bleach (12%) then color my hair with the Loreal Excellence Ash Supreme 7.17. How many days before I can color my hair after bleaching it? Btw, it will be my first time bleaching my level 5 hair. Thank you
You can colour straight after bleach. And 7.17 it should be done on a level 8 hair. Do not bleach to extreme as the colour will fade fast too.
@@sebastian-chan-cc.education Thank you! I have doubts before if I need to wait 1 week before coloring my hair because of the other videos I have watched.
@@sebastian-chan-cc.education If I used white bleach (12%), will I achieve the level 8 hair?
@@alyssacarlapernecita4783 as you said your current hair is level 5, using 12% bleach will lead to level 8.5-9 .. I was thinking you use 9% will be sufficient .. where will you be doing at ? At home or salon ? If your atmosphere if humid and warm .. do not pile the bleach together as it will generate heat
@@sebastian-chan-cc.education I'm from Phillippines and our atmosphere here is warm. I'll be doing it at home.
Hello , i want to bleach all my natural dark brown hair to light blond, and some traits of the ends of my hair are already bleached to light blond , and im sceard to damage its cuz i want to make it all blond , what do you advice me to do 😣😣😣
You bleach other parts of the hair and not touching the ends. If you are scared that you might accidentally touch it .. you can apply those light blonde area with conditioner first.
Very useful information! Thank you!
Welcome
Do i need to put some foil on bleaching my hair? Its been my 3rd time bleaching it but some parts of it are still on level 6 like golden brown or bright rust color but on the inner layer of my hair its almost blonde its just that outer part is still diferent on color what should i do?? Thanks btw im planning to color silver grey.
The result of these is due to overlapping, you might want to stop bleaching the inner part and get the surface level 6 to bleach it to the same inner part shade before you continue bleaching the rest. Once you bleach the surface to the same level to inner, you could wash and condition the hair, and bleach one more time on wet hair. I would suggest to leave some gap in between in the inner area. And bleach from top to bottom.
You could put yourself not under air con room too much Because low temperature would slow bleaching process. Overlapping will increase temperature, doing that will break the hair very fast.
Hope u do reply my comments.
I bleached my hair with 9% developer 5days ago... it became orange not verry yellowish.
May i know here?
How many times i need to apply the bleach with 9% again? Or i may take the other cream color from drugstore for third color apply for make it look lighten white?
Hopefully helpful 😌
Hi, orange is at level 7, you have to bleach one more time using 6% ( goes to level 8) or 9% ( goes to level 9) . Anyway, what is your target colour?
Can we mix vinegar to bleaching powder to lower the ph sir ?
I have videos on this under bleaching surprise. You can add with vinegar and water.. not direct vinegar to bleach as it cause a smell that is harmful to our bodies
But i hope you can suggest any olaplex like to mix with bleaching . You know Prevention is better than Cure Sir ...........??????
@@applesyrup2402 would try one day. The purpose of the videos is to find ways when you met some difficulties in the salon. And we are so rely on some products, without them we can’t achieve some of the results.
Will this work on my already bleached dark orange hair?
You mean for the blue bleach ?
@@sebastian-chan-cc.education yeah blue bleach? I had very dark brown hair, tried to bleach but it went dark orange
@@ihaka70377 because blue bleach is only use when you have light orange. It does not work on dark orange. You have to use the white bleach instead
@@sebastian-chan-cc.education thanks. I will let you know how it goes
@@sebastian-chan-cc.education Directions hair lightening kit 40 vol, would this work?
I got severe acne within one week of applying bleach on just test section at the back of my head... I wanna do more but too scared to try 😭 I already bought everything.. and it didn't even touch the scalp
Please stop bleaching till ur acne heals. You bleach too close to the scalp and due to overlapping it heats up and burns ur scalp. What is the peroxide you are using right now?
@@sebastian-chan-cc.education i used keune bleach and it didn't touch my scalp... I don't know what went wrong.. i used 30vol and 2:1 and waited for an hour.. i didn't touch roots only a test patch
@@AmzPixie you might want to try to do 1.5cm away from scalp. And try not to put too much bleach on the root area. You can apply bleach onto root area and comb it away the excess. This will not develop burn 🔥 easily
@@sebastian-chan-cc.education okay thank you so much 😇
@@AmzPixie welcome
What level developer please!!
Depending on the current level you have right now, and the result level you want to achieve
Because of you and others like you people with damage hair would think they can leave bleaching product on their hair for 1 hour and more , if they don’t like the result… hairdressers must follow the manufactures direction on a product I have never see bleaching powder say an hour … please people check your hair to see if its porosity/ breaking off remember this demo is being done on extentions
Yes is true you have to check the manufacturer instructions. If you use 6% and below, you are able to leave more than an hour on virgin hair. Of cos, chemical processed hair not advisable. Never say on the product does not meant that it cannot be done. If you want to do, have to do with caution.
Pls can any of de bleach be used on the skin too
Bleach powder can be apply on skin . But is the peroxide that matters. 6% and below can be apply on scalp or skin. Not for 9% or 12%, if apply it will feel burned.
What's the process if you're bleaching a frontal
U mean the fringe area ?
What are you applying in powder? 😅😅
That is bleach powder with peroxide
@@sebastian-chan-cc.education i wasted my money and time
😭😭
I used gray colour in my hair but it didnt worked bcoz i added shampoo instead of developer
@@pasangsherpa2547 😱. But is ok, at least hair hair is not damage.
You helped me thanks! ❤
You are welcome
Thank you for the video!
Welcome
Hello I have a question please. Which one of the bleaching powder would likely cause more breakage after bleaching hair within a month or so?
All bleaches will cause breakage. Expensive brands and cheap brands will cause breakage. Is the process that you mix in the bleaching powder, example; the peroxide percentage, or did you put any olaplex or bondplex in it to weaken the power of the bleaching powder? Or you can put conditioner in it too. And most importantly apply on wet hair to prevent excessive heat produce on the scalp.
THANK YOU SOOOOO MUCH❤️
You are welcome
Thank you 😘💞💞
Welcome
Thanks very much ❤
Welcome
Thank you 🙏🙏
Welcome
I panicked when my hair turned light brown after using the blue
May I know what blue are you using ?
hi I want to bleach my virgin hair (black) to brown/light brown color. which bleach powder should I use? blue or white?
Just to brown, blue will do. Because brown still consists of the three primary colours, white will eventually wipe out and goes to gold
@@sebastian-chan-cc.education thank u so much for replying! 🥺
@@myra388 no problem
😊Thanks!!
Thank you too 🙏
So good
Thank you
What developer did you use?
hi, you mean the volume ?
Can i ask? My white bleach powder turns into something beige huhuhu is it still effective???but its not expired
Hi, may I know what is huhuhu? Turns colour still can use. But if it becomes rocks/nuggets in the bleach bag .. than it can’t be use
@@sebastian-chan-cc.education thankkk uu
@@christianpulhin welcome
Why are you using a metal whisk... Isn't that reactive? You're not supposed to use metal with bleach or at least that's what I've always been taught.
Most of us here have been using it .. there is no problem till now .. though is aluminum
You are not suppose to use metal that rust ..
👍👍👍👍👍👍
Thank you
Salut je veux teinter mes perruque ce tout noir ,j ai le javel blanc ,pour obtenir la couleur marron quoi faire?
Hi sorry I do not really understand the language
Hi love the video! But I have wavy/curly hair that's medium brown with natural red highlights and want to bleach a part of my hair and was wondering if I should use white or blue and what developer? My friend suggested 30 v but I don't know if that would damage my hair too quickly before lightening it enough
Thank you 🙏. May I ask, have you done any chemical services to your hair before example; perm, rebonding, highlights etc?
@@sebastian-chan-cc.education no problem (: no the only thing I've done is dyed it red abt a year and a half ago but it was semi permanent dye and almost all that has been cut off.
@@carenarose6037 ok I assume is virgin hair, if your hair is fine texture, using 30 v within an hour from medium brown will turn to level 8.5 - 9. If your hair is coarse texture, using 30 v within an hour will turn to level 8-8.5.
If you use heat or expose to sun, it will break.