How to adjust needle bar heights on a Meistergram Embroidery Machine GEM XL-1500
ฝัง
- เผยแพร่เมื่อ 5 พ.ย. 2020
- Welcome back! Today we are going to be showing you how to adjust needle bar heights and and when and why they should be adjusted.
SUBSCRIBE!
/ @meistergramembroidery...
FOLLOW US!
Instagram: / meistergramembroidery
Facebook: / meistergram
Twitter: / meistergram
VISIT OUR WEBSITE!
www.meistergram.us
CONTACT US!
1-888-463-4783
(305) 471-0200
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This is why our customers love us:
• Meistergram at West Co...
How to remove the needle case on your Meistergram Embroidery Machine GEM XL-1500:
• How to remove your nee...
How to reinstall your needle case on your Meistergram Embroidery Machine GEM XL-1500:
• How to reinstall your ...
How to assemble a stand for your Meistergram Embroidery Machine GEM XL-1500:
• How to assemble the st...
How to replace the reciprocator on your Meistergram Embroidery Machine GEM XL-1500:
• How to replace the rec...
Terimakasi atas ilmunya pak semoga bermanfaat
It's ageas I was looking for this adjustment thank you so much
Awesome video and explanations.. thank you!!!!
me sirvió, muchas gracias. Desde Argentina. I use your video to fix a problem in my machine, thanks a lot.
traducilo q no entiendo un joraca
Su explicacion es fantastica, se podria hacer videos en Español?
Good job very helpful!
One of my needles is hitting the needle plate how do I adjust that
Thanks!!!
I had a problem with my timing and got that figured out. Now none of my needles will go all the way down. The pressor foot only lowers to about 1-1/2" above the plate. Any suggestions?
Hi if the needle of my machine is not coming out from the down part of the machine,what can I do?
Hi. I have machine that very similar to this and wanted to know if you can help?
And how to adjust hook timing with degre ° ??
Nice one
Nice
The needle point length from the needle eye varies according brands. How can you recommend 6MM as fixed measure in every case?
All these machines are the same!
Needle lowest point depends on hook point passing hight level at needle.
Hi sir
❤❤
this is not done correctly
And after you have to change all the needles lol because you hit them with the key
Were merely scratching the surface of the key with the needle. The same is done if you use a guage it will not damage the needle unless your force it.
From what I have seen this is how everyone checks the needle depth.
@@HectorGonzalez-uj5nk no is not true you need 1 millimeter between the needle and the gauge and if you touch the point of the needle 100%sure you will see the bad results on the garment, but it's up to the quality required, if you want a low quality of embroidery it's perfect 😉
@@tracyfarmer8117 yes is true 180 and 0 degrees are the fixing position, true, what I see that is not correct is the fact that he touched the point of the needle
No issues sir.I am new to this machine. Are you familiar with them because I am having a hard time getting it operating correctly. Thread tension is an issue after performing the task that Hector was teaching.