@@hugoruas we will see brother on my next video we will fly outdoor with goggles n3 and Fpv rc3 to check if what change including battery Test thank you👍
@@letsdr0neitbyaddison327 to be safe brother and one reason is the screw that i put is small head the tip of the screw will damage the motor thats why need Threadlocker.. Its easy to replace the props brother same like the original screws thank you👍
Best wishes for 2025. I have also tested the 3,4 and 5 blade propellers and I find the 5 blade a bit quieter. I wonder if it is also better with a strong wind. The holes in the Gemfan props are actually a bit too big and I will continue to monitor that they do not become wider. Locktite blue is oke, never use the green one.
Hi everyone. i just have a doubt: Is the glue used just in case I want to keep the original screws or even if I buy the ones in the description? Thank you for your help.
@@rafaelmlopezlozano It is better to use a threadlocker, medium strength, on the screws. You can also adjust the holes of the propellers, but that is precision job. If you don't do this properly, you may crash your Neo or the propellers will vibrate. Good luck.
@ Thank you for your answer. I thought that the new screws were enough without the threadblocker. I have never used it. Any problem to unscrew them later?
@rafaelmlopezlozano For example, if you use the blue one from Loctite or a similar brand then it should not be a problem, NEVER use the green one for your drone. Be careful that it does not get into the electric motor.
@@jepolch hi brother thanks for watching and commenting the test outdoor is on going brother to test the flight time or any changes video post this coming week thanks bro happy flying👍
@@el-saint-oneof3slocosbnbre431 hindi siya pwede bossing 👍ang neo compatible lang sa Mobile control,RCN3,RCN2 ,RC2,FPV RC3 at RC Motion 3.(Sa FPV RC3 and Motion 3 need mo DJI goggles n3👍
I’d like to see this on a decibel meter rather than a recording
Wow Great Test Happy New Year🎉
@@mikoymondara1544 thanks bro👍
Modded my d51 holes to fit stock dji screw. The screws i bought at the local store where 1mm too big. Didn't even use thread locker. 😂
@@Kuroji07 thats great enjoy
Nice buddy😊
@@izzaniielachannel thanks appreciated 👍
Wow its quieter than the original propeller! Happy 2025!
@@tedclaudio9025 yap brother I think this is better I will try to fly outdoor to check if something change with the speed happy 2025 thank you👍
Will it handle high wind better? Not too concern about noise but if wind resistance can be improve it definitely a big win
@@JackReaper9995 thats right brother we will be test that,video test outdoor coming next happy flying thank u 👍
It handles substantially better and is very noticeably quieter. Im sticking with the D51-5's.
Excited ako sa efficiency neto boss.
@@dirtndronebai Oo bossing try natin outdoor next video happy flying👍
❤ este video. A bateria reduz autonomia com esta upgrade?
@@hugoruas we will see brother on my next video we will fly outdoor with goggles n3 and Fpv rc3 to check if what change including battery Test thank you👍
@DronePH-2024 Aguardo. Abraços.
Cheers bro🥂
Hello one question!! Why You put The loctite them dont gonna be dificult to repacle the props?
@@letsdr0neitbyaddison327 to be safe brother and one reason is the screw that i put is small head the tip of the screw will damage the motor thats why need Threadlocker..
Its easy to replace the props brother same like the original screws thank you👍
@ okkkkk i have more clear the video thanks very much!!!!
what is best? m1.2 * 5 or 6mm? thanks :D
@@victorsandoval6501 take M1.2 *6mm bro that's fine
You also test 4 blades, sound is better with 4 or 5 ?
@@kyosuke_14 I have been test brother I think 5 blade is silent that 4👍
Thank you !
Best wishes for 2025. I have also tested the 3,4 and 5 blade propellers and I find the 5 blade a bit quieter. I wonder if it is also better with a strong wind. The holes in the Gemfan props are actually a bit too big and I will continue to monitor that they do not become wider. Locktite blue is oke, never use the green one.
@@Herojagidihe thanks brother thats great happy flying👍👍👍
Hi everyone. i just have a doubt: Is the glue used just in case I want to keep the original screws or even if I buy the ones in the description? Thank you for your help.
@@rafaelmlopezlozano It is better to use a threadlocker, medium strength, on the screws. You can also adjust the holes of the propellers, but that is precision job. If you don't do this properly, you may crash your Neo or the propellers will vibrate. Good luck.
@ Thank you for your answer. I thought that the new screws were enough without the threadblocker. I have never used it. Any problem to unscrew them later?
@rafaelmlopezlozano For example, if you use the blue one from Loctite or a similar brand then it should not be a problem, NEVER use the green one for your drone. Be careful that it does not get into the electric motor.
How do the Gemfan propellers affect performance? Do they reduce flight time? Thanks!
@@jepolch hi brother thanks for watching and commenting the test outdoor is on going brother to test the flight time or any changes video post this coming week thanks bro happy flying👍
@@DronePH-2024 Thanks! Looking forward to you next videos.
Где винты м1,2 6мм покупал?
@@evgenyegorenko9572 check at the description on this video brother or found at Ali express thanks
Pwede den ba ang rcn1 controller ng dji mini 2 sa dji neo
@@el-saint-oneof3slocosbnbre431 hindi siya pwede bossing 👍ang neo compatible lang sa Mobile control,RCN3,RCN2 ,RC2,FPV RC3 at RC Motion 3.(Sa FPV RC3 and Motion 3 need mo DJI goggles n3👍
San ka kumuha screws boss?
@@poletcarlos sa Aliexpress bossing nasa description diko lang alam kung anjan na sa shopee
@@DronePH-2024oks na boss salamat! Udlot na naman ang aking tahimik na pagddrone hahahaha welp!
Idol bat kaya ayaw mag take off ng sakin? Nakuha ko na props and suggested screws mo 🥹