Things to Consider When Installing Your Foxbody Interior After Paint - TIPS05E54
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Getting the restored interior back in the twin turbo coyote notch! Including a brand new carpet from NPD and some other tricks and tips.
///SUBSCRIBE
To My Channel! - Your Support Motivates!
///VISIT MY WEBSITES
theinfamouspro...
dechmotorsport...
///FOLLOW ON SOCIAL
/ theinfamousproject
/ theinfamousproject
/ infamousproject
/ theinfamousproject
///GEAR & EDITING
Camera: GoPro Hero7 Black
Accessories: GoPro Accessories Only (I'm brand loyal)
Mic: Rode Micro
Editing: Myself via Adobe Premier Pro
Music: elements.envat...
///TAGS
#foxbody #restoration
A little 20 buck portable steamer would help with removing that tint glue, especially for those with built in defroster. Also good for steaming carpet to help it fit.
Another one saved!!
Clean install
You have a lot of experience in Fox body, you are the master, love the videos, I learn a lot, i see thigns that I did not know could be like that or that they where there. thanks Bro
Chris for a guy having OCD I would of figured you would of cleaned and re dye seat belts before panels 😂 I guess mines worse then yours did on my 91 GT and just did on my 89 GT. Stereo mess I found that on 89 and re wiring it to but I'm adding a stock looking head unit I got from a guy in NY has blue tooth built-in
Great vid bro!!!!
I really appreciate the tips and details you bring to your channel. I have to redo my interior which I am somewhat dreading but it needs to be done. You actually get me motivated to do it. Great job as always 👍
Awesome. Appreciate it
Window cleaner with ammonia works great for removing tint and adhesive. Spray on, let soak for a minute, wipe off with a microfiber towel. At least, it worked well for me on my son's 25 yr old window tint removal in his 92 Ranger.
Your attention to detail is legit. Thanks for the info. As a newer follower and enthusiast I learn a lot. 😎
Thanks I appreciate it
Awesome video, thanks for the tips and tricks! 🦊
They make a spray to remove the tint. It works well. In NY they outlawed tine back in 2016 I think? We had to remove it just to get it inspected.
Awesome video. Thank you for your willingness to pass on your knowledge to the Fox body community
That interior is looking sweet, always great attention to details, really like the black carpet with a white car. Can't
to see this thing hit the road for test run. Thanks for sharing.
Awesome bro! Keep up with the great knowledgeable content, can’t wait to see it come along!
Great work! Excellent tips on the carpet install and tint glue removal. You really make the dash install look easy...
Great video!! Cool car!!
Great video….maybe “fathead Garage” can support with AC components that routs under inner fender passenger side… I have not done but have seen others that made it happen
Just bought my 1st 88 notchback and I wish I found your channel before! Lol but you've got me motivated to make this car special. Does the metal panel in the back that holds the 6x9 speakers bolt in? My car seems to be missing this just has the shelf. Someone butchered the dash harness and heater box so it's going to be a winter project. Can I use a interior harness from a 91? I bought a 140 mph cluster but someone cut the wires in the pins.
You could look into using a Volvo electric power steering pump and then you could put the AC compressor back in it’s spot possibly. I have a coyote AC compressor from my 2014 yote if you need one. My swap is a race car so no AC needed.
Hmm that might be an option! Do you know if they put out enough to run hydroboost?
@@TheInfamousProject yeah I’m pretty sure they do. I’ve seen a lot of guys do them on the coyote swap foxbody page on Facebook. And you can hide the pump in the inner fender well.
Speaking of dust after getting car back from body shop and paint. What’s a good cleaner or method to remove bondo dust from dash, steering wheel, etc ?
Compressed air then dawn dish soap and water
Thanks!
Welcome
Hey! Love the channel!! I just bought a 1989 FHP SSP and I want to install coilovers, what do you recommend ?
Depends what type of driving you intend to do.
@@TheInfamousProject I’m just going to drive it to local car shows and drives on the weekends.
@@tonystokes8791 personally I would stick with a spring and strut/shock setup if that's all you're going to be doing.
@@TheInfamousProject Thanks! I like that look on your coupe, what setup do you recommend to get that low ?
@@tonystokes8791 this coupe has Viking coil overs. If you check out my other white coupe video I talk about suspension setups. I also have a podcast about suspension as well open.spotify.com/episode/56fxHsd9QNAtjpycIWrMt8?si=EvpI1bnjQSSI5n_wXdP9hQ
Wish I could send my 86 to you from Birmingham, Al and let you do my interior. Wow. Where are you located?
Austin TX
Hey Chris, is the rear window without defrost a factory option? I've never seen one before. Probably not a popular option in the great white north here in New Brunswick.
Yes on southern cars..
Do you think because you’re Canadian TH-cam doesn’t promote your channel more because you should have triple the subs you have now you have great content
Lol probably...
Why install an air bag steering wheel and then you have no tilt. Also what about the gauge cluster, doesn't it need the 90 and newer. Nice build
I personally like the position of the airbag wheel. No you do not need to change the cluster but you do need to change the connector for the horns to work
I have always liked the look of the air bag steering wheel more than the tilt, plus i never had interest for the tilt. I plan on doing the same thing to my 88 with tilt.
Chris, donkeyfixit uses poor boy product and soaks his belts. Agree I prefer stock stuff
Ya I've soaked before too.. usually when I dye lol
There is a way easier way to remove old tint.Get a trash bag and on the outside of the glass cut out the pattern of the windshieldThen on the inside spray it down real good with Windex or even better super stripper.Then place the cut out pattern on top of the Windex or super stripper.push it flush against the glass.Put the car out in the sun give it about 20 minutes.See if it feels off if not spray it again wait another 20 min and it should just peel right off,really stubborn tint will come off with a steamer after the Windex,super stripper trick.
Can't say I've heard of that before. Good to know. Curious if it would get overspray etc off? I just find a razor blade fast and effective
LA Awesome works great taking tint off, and its cheap
Did u change the sn95 axles for the 93 fox length axles
No I got better offset wheels
What is the offset and width of those wheels?
my buddys mustang literally shot rods out of his block!!!!!! was hoping you could help me out with something. please PM me.. love
Jimbo Fisher
What Frame connectors are your favourite??
I've got Stifflers for this one
He really considered cleaning the carpet what a tool bag. Contrasting is double speak by him for cheaping out. Everyone cheaps out on foxbody interiors and engine bays
LMAO. I sincerely hope you are a first and last time viewer. Hopefully I can see your interior and engine bay someday.
I have a pair of 88 door panels regatta blue hit me up if you are interested in them