Thanks Bolo I just hooked up my Mpc x and Fantom. I never knew they could work together in this way. Knowledge is power. I subbed to your page keep up the good work.
Of course your video is the only one that makes sense. Thank you BDP. Unfortunately the new update only supports 44.1khz sample rate. I own a Korg Kronos and an Allen & Heath QU-32 mixer. Both units only transmit at 48khz. I hope Akai will upgrade soon to support the higher rate.
Bolo I got a question , when I export my files to load into pro tools , the sounds from the Roland are not exporting , when I load the exports into pro tools only the mpc sounds like drums and whatever sounds I have on the mpc export but the roland sounds do not , how do you get them to export ?
Thank You Brother. I was looking all over. I had seen your Korg Krome EX video. I am using that with this same method. Once I turned off that local everything is working fine. Ready to roll. You the man My G!
I need to figure this shit out ,I have a kronos, been tryin to dothis shit over a year smfh, I got it recording the kronos sounds but it wont record them thru the whole sequence, after about 2 bars everything I recorded into the mpc is blank. If I play a piano for 8 bars on playback it only plays about 2. And I cant figure out how to have it coontrol the mpc sounds without playing the kronos sounds ........fml
Still doesn't work properly, so I switched to the roland jd xa.....same thing , when O record an 8 bar sequence starting from the beginning it only plays back around half , then I get long ass wild notes
For some reason I couldn't get this to work. Although I don't know what your midi settings are on the FA-06. I have the FA-07. I set everything the same but didn't hear anything in the midi track. I'm running my FA out to a mixer then back to the MPC. If I turn "off" Local Switch on the FA and go into Sample on the MPC and turn on the input, I can hear my keyboard. So the sound is getting back to my mpc. I even tried going directly from my FA to MPC , still no luck. What are your FA midi settings?
Did you ever find a fix? I have FA07 and Live 2, same problem...everything hooked up right via USB cable but no audio coming out when I play FA07 keys.
BOLOOOOOO😂😂. You did it Champ 👍🏾👊🏾. Thank you. The issue was with the MSB & LAB Banks. Now I can sequence sounds on multiple midi channels. Great tutorial ⭐️⭐️⭐️⭐️⭐️
Dope vid! I have an mpc live 2…..followed all the steps, but I have no sound coming through the mpc when I play the fa 6. I can see something happening with the feedback and can hear the recording play back. But can’t hear any sound or metronome click sound through my headphones
I never knew that about the banks and program ch! I've been saving the session in the fantom and in mpc and having to line up by the project name. How do you find out the Bank MSB and Bank LSB numbers? Edit: Never mind didn't finish video yet. haha.
Thanks for your video. I've had a problem, there was nos sound from my roland. And i found where the problem was, the sampler wasn't on "on" (I find the solution on a AveMacRee vid). Hope it will help the one who meet this problem. Your tuto was very clear and it was so simple to do it with your tip. Thanks again.
Man I just wanted 2 say thanks 4 Being there, I have the original roland fa 06 and I'm about 2 cop the mpc one gold edition, I'm soooooo excited about this information, salutes sir big ups 🔥💵🎵🎸
Tks! Does that means you make a template so you have 16 sounds and use mpc sequencer ? So I have a set I can lay down ideas quickly with the fa as a sound module and keboard.
I have the exact same setup. However, I’ve been trying to also connect my iPad through the midi in/out ports of the Fantom to also use the sounds of the iM1 Korg app… It’s connected but don’t know how to route the audio from the iPad back to the Fantom… Audio is coming out of the iPad. Any help is highly appreciated!
One question, how to make a song from MIDI FA Tracks? When I try to use "Export >> As audio mixdown" my *.wav is empty. Help. I'm MPC Studio Black and MPC Software user. (I use mixer with USB audio device - all is fine when I'm play tracks)
You still have to export the audio from keyboard directly into Daw or MPC X first. It doesn’t bounce sound from keyboard automatically like sounds that are already in MPC
@@BoloDaProducer What's the best way to capture the audio from the Roland. Do you sample it into the MPC while the midi notes are being triggered by the MPC?
Dear Sir, I recently purchased the Rowland FA 06 Keyboard and have encountered an issue with some of the buttons not functioning properly(Enter Exit,Shift, up,Down,left, right,Dec and INC). I kindly request your assistance in resolving this issue. I am unsure if these buttons require specific settings to be assigned in order to function properly. Could you please advise me on how to resolve this issue? Thank you for your attention to this matter. Kind regards,
Hey wassup Bolo, I really need you to get back to me on this one man... I Recently bought a Roland FA-07 to go along with my Mpcx, I followed along with all of your instructions on how to pair the two devices. But for some reason I still can't get the audio from the Roland to come through the Mpcx.. Some advice when you get a chance would be very much appreciated big guy.... Thanks in advance...
I'm having the exact same problem with my Roland FA07 and MPC Live 2. I hooked them up EXACTLY like Bolo does...made sure all the settings were correct on both devices. I get nothing! I see the level bars going up on the MPC but there is no audio. I know it's probably something simple but so far no luck.
I got a fantom g6. I can get everything to work but I can't get the sounds from the fantom to play onto the mpc. Can anyone give me some suggestions on making this work?
@@jamesonvparker yes. I can get it to play audio from fantom to mpc or as a midi controller. However, I can't play audio and midi together using the fg sounds.
Thanks for the video. I have followed every step to the T. But I can’t get any sound from the mpc when I am using the midi channel? I do see the signal light for input and output working when I press keys on the key board. I can also go to another track within sequence and I hear Audio coming from my speakers and headphone, so Audio is working for the mpc. Lastly if I plug my headphone in my Roland, I can hear Audi coming out. It just I can hear any Audio from the midi track no matter what channel I go to!? What am I doing wrong please...
Make sure the gain 1and 2 jobs are turned up. If you got it plugged into 3/4 make sure that knob is turned up. Make sure the main and direct knob is in the middle. Make sure on track the record button is red and says Auto underneath. If those don’t work. We might have to do a one on one, but I charge for that.
How do I separate my midi tracks ,example Roland Piano , track 2 Roland bass. Cause I change track add midi program but it stays on the same midi track a changing sound changes the original recorded sound, can you help?
Appreciate your videos I have a new MPCX I followed your directions , I have one problem in computer mode recording will only allow me to do 4 bars and stop recording when I hear it in play back it only goes to 4 bars when I have set it for 8 or more , in standalone it's all good, is there some setting in the software that I can change it.
That's a dope idea way of saving and I remember we used to have to load them in manually when we used the sound modules. What category do I look under in my JunoDs88 to find the Msd and LSD patch bank numbers?
A timely tutorial. THANKS. My Nord Lead A1 is impatiently waiting for its MPC One to communicate in midi, and keep (memorize) its sounds (program changes) in each sequence. Am I okay there?
Hey big bro, I need your help..I have a mpc one and just got the Rolland fa 06. I watched your video on connection however my Rolland is not coming up on the mpc. Can you help me out?
Hey Bolo, or anyone else that has these two pieces of gear, I'm having trouble figuring out how to put a synth from the Fantom 06 into the MPC One, and get that synth on the Midi channel 1? On the Fantom 06, the sound is on part 7 in the zone select, but I want it to be on midi 1, not midi 7 or part 7? How do I take the sound from midi 7 to midi 1 or part 1, in order to play it into the midi 1 on the MPC One? I hope this isn't confusing, but I can't figure it out? Is there any way to transfer the channel 7 to channel 1 on the Fantom 06?...SBN RESONATE
Very useful thanks for the video. Can he ask you, is it possible for the Phantom to control the MPC and everything is synchronized when you change the tempo of the Phantom to change to the MPC as well?
@@BoloDaProducer I Alesis DM-5, Roland JV 880,and Roland Juno 106 I like to use with the mpc x Is it best to use a mixer or can the X handle it My Phantom 06 is going to be my contoller Am building a rack with some analog equipment Sounds on the 880 is killer
Bolo I need you help, I am using the Fa-08 with the Zenbeats software conected to my Mac Pro 2013 with the Big Sur os, I can record the audio from the keyboard, I have try everything, can you help me. Using the usb connection.
Good stuff Bolo, thanks for sharing I have both pieces of this equipment. Now I can Manage my workflow. Let me know where I can find that stand you have for the MPC X, so I can purchase it. I also have that keyboard stand, things will fit right into place for me. Thanks again Bolo. You da man!
Do you have to use the main / direct knob in order to hear the synth? When I mix in the direct sound it lowers the output of the internal mpc sounds (drums) etc anyone else experience this?
Everything worked fine except I can't adjust the volume of the Fantom 6 with the MPC. Would i assume tmu can only adjust the volume of the midi notes with the Fantom?
Great video but I can get any sound I have watched this video many many time I think you are leaving out something out like what are your Input and output set to in the sequence section set to how about a one on one session please? do you take a credit card or Paypal?
This video is just what I needed thank you but my own problem I have the MPC 2000 XL still and I want to do the same thing but run the MPC through the Roland08 to record and keep all data can I do that?
Hi again,,,just a quick question please ,,,I am getting my FA06 anytime it's on its way ,,,so I am going to link this up with my mpcx as to your video,,,however I currently have my speakers going into the inputs 1 and 2 on the X ,,,,,so would that mean I could plug the FA06 jacks onto the main inputs on the mpcx,,,,would that do the job,,,sorry if this is a stupid question ,,,thanks ,,,,,,,,,,,or would I be best to use the set up you have in your video,,,move my leads about etc ,,,😄
Thanks a million, I've used an FA08 for everything so far, and just bought an MPC one, this is a very helpful video thanks. One question please.. can I transfer my songs and sequences from the FA08 to the MPC One, in a similar way to this when they're connected?? Thanks Simon Tattooed Balloon 🎈
Nice video, Bolo. It answered my exact question without any bullshit. I would have said that you have a new subscriber, but I have already subscribed to your channel. Thanks a bunch!
Hey Bolo big dog man I just got the Fantom 06 can u drop the links to those 1/4 inch cables , and USB cable tht I’m go need to hook up to the MPC x and the Fantom bro ? I wanna make sure I order the right stuff u feel me
The question i wanna know is can you also control the vst plugins, i have a fantom g6, i can control the midi but when i switch to plugin mode on the mpc xi can't play the vst with the g6
Yo Bolo! PLEASE tell me you know about the expansions for the FA..??? ALSO did you know you can load the Integra 7 expansions???!!! Man you GOTTA check it out!
Good Day Bolo.. Man Im trying everything you saying In the video and for some strange reason mines is not working. I see something about Ableton live would that by any chance have something to do with it??? Also Big Bro How Do or Can we sync the MPC Beats Program To the MPC X...??? Because I wanna use my MpC X in stand alone but also use the screen to see what Im doing as well etc..
Never Mind Big Bro I just did it... lol I had to switch on the rear buttons on my MPC X... But Can I Still Control MPC Beats Program With My MPC X in Stand Alone...
Hey bolo bro on my Fantom -06 is different from the FA 06 so my sync mode don’t have the option slave it says External,Internal, and Remote so which one would I go with bro
What's up man, great video! I have moxf6 and I tried to follow the same steps but I'm not hearing any piano from my moxf and nothing when I hit the pads either. Any idea what I'm doing wrong?
Great video! I had a question i was hoping you or someone else on here might be able to help me with. Any help would be greatly appreciated. Im trying to connect my JDXI to my akai force. I have all 4 tracks from the JDXI loaded as individual MIDI tracks on the force. The problem is that if i change the loaded program for one of the tracks, it changes the loaded program on all 4 tracks to different programs. Is there a way to change the loaded program on each individual track, without it changing the loaded programs of the other JDXI tracks? If that makes sense.... I know its probably a simple fix, but Im stumped at this point. thanks again in advance for the help
Hi again ,,,I’ve managed to set my FA06 up with the X thanks to this video,,,respect thank you,,,,,,,,,,,,,,,,,so on track 1 I have X drums,,,,and on track 2 I have the FA06,,,midi 1,,,,great,,,,,,,but when I try and record on say track 3 using the Fa06,,,,,A,,,,it changes my track 2,,,,to the chosen new sound which I wanted to create on track 3 ,,,,,,,,,,,,,,,,,so how can I add another midi track using the FA06,,,,, onto the X ,,,please ,,,,,I hope this makes sense ,,,thanks again for your help 👍
Check out this Idea List on Amazon: Home recording Studio Products by Bolo Da Producer www.amazon.com/shop/bolodaproducer?listId=3TGW6BSKMDJBN&ref=idea_share_inf
First man who explain how to merry MPC with FA. Super!
Thanks Bolo I just hooked up my Mpc x and Fantom. I never knew they could work together in this way. Knowledge is power. I subbed to your page keep up the good work.
Thanks Bolo. I successfully hooked up my MPC X with my FA-08.
Of course your video is the only one that makes sense. Thank you BDP. Unfortunately the new update only supports 44.1khz sample rate. I own a Korg Kronos and an Allen & Heath QU-32 mixer. Both units only transmit at 48khz. I hope Akai will upgrade soon to support the higher rate.
9:20 the +/-1 number is due to the fact that on the MPC, bank numbers start from 1, but on synthesizers, the banks start from 0.....
Bolo I got a question , when I export my files to load into pro tools , the sounds from the Roland are not exporting , when I load the exports into pro tools only the mpc sounds like drums and whatever sounds I have on the mpc export but the roland sounds do not , how do you get them to export ?
That lsb program change is a life changer. I’m starting to use that on my Arturia minifreak with the live 2
Thank You Brother. I was looking all over. I had seen your Korg Krome EX video. I am using that with this same method. Once I turned off that local everything is working fine. Ready to roll. You the man My G!
I need to figure this shit out ,I have a kronos, been tryin to dothis shit over a year smfh, I got it recording the kronos sounds but it wont record them thru the whole sequence, after about 2 bars everything I recorded into the mpc is blank. If I play a piano for 8 bars on playback it only plays about 2. And I cant figure out how to have it coontrol the mpc sounds without playing the kronos sounds ........fml
You have to turn off “Local control” on Kronos so it won’t play sounds until is assigned.
@@BoloDaProducer I did
Still doesn't work properly, so I switched to the roland jd xa.....same thing , when O record an 8 bar sequence starting from the beginning it only plays back around half , then I get long ass wild notes
Hey Bolo or anyone when I hit strings and other buttons on my F06 it controls stuff on my MpC one what am I doing wrong.
Make sure it’s in slave mode
@@BoloDaProducer my phantom says internal, remote and external. I think external would be the slave right?
Figured it out my MPC program change setting was on. Thanks for the videos
For some reason I couldn't get this to work. Although I don't know what your midi settings are on the FA-06. I have the FA-07. I set everything the same but didn't hear anything in the midi track. I'm running my FA out to a mixer then back to the MPC. If I turn "off" Local Switch on the FA and go into Sample on the MPC and turn on the input, I can hear my keyboard. So the sound is getting back to my mpc. I even tried going directly from my FA to MPC , still no luck. What are your FA midi settings?
Did you ever find a fix? I have FA07 and Live 2, same problem...everything hooked up right via USB cable but no audio coming out when I play FA07 keys.
BOLOOOOOO😂😂. You did it Champ 👍🏾👊🏾. Thank you. The issue was with the MSB & LAB Banks. Now I can sequence sounds on multiple midi channels. Great tutorial ⭐️⭐️⭐️⭐️⭐️
Dope vid! I have an mpc live 2…..followed all the steps, but I have no sound coming through the mpc when I play the fa 6. I can see something happening with the feedback and can hear the recording play back. But can’t hear any sound or metronome click sound through my headphones
I never knew that about the banks and program ch! I've been saving the session in the fantom and in mpc and having to line up by the project name. How do you find out the Bank MSB and Bank LSB numbers? Edit: Never mind didn't finish video yet. haha.
You can find his documentation for any keyboard online
Bolo, where did you get that bracket for your MPC x to stand above the desk?
Here amzn.to/2NHyb20
Thanks for your video. I've had a problem, there was nos sound from my roland. And i found where the problem was, the sampler wasn't on "on" (I find the solution on a AveMacRee vid). Hope it will help the one who meet this problem. Your tuto was very clear and it was so simple to do it with your tip. Thanks again.
Have you ever had to do maintenance on your MPC X and how did you handle it
Man I just wanted 2 say thanks 4
Being there, I have the original roland fa 06 and I'm about 2 cop the mpc one gold edition, I'm soooooo excited about this information, salutes sir big ups 🔥💵🎵🎸
🔥🔥🔥🔥
Tks! Does that means you make a template so you have 16 sounds and use mpc sequencer ? So I have a set I can lay down ideas quickly with the fa as a sound module and keboard.
I have the exact same setup. However, I’ve been trying to also connect my iPad through the midi in/out ports of the Fantom to also use the sounds of the iM1 Korg app… It’s connected but don’t know how to route the audio from the iPad back to the Fantom… Audio is coming out of the iPad. Any help is highly appreciated!
One question, how to make a song from MIDI FA Tracks? When I try to use "Export >> As audio mixdown" my *.wav is empty. Help. I'm MPC Studio Black and MPC Software user. (I use mixer with USB audio device - all is fine when I'm play tracks)
You still have to export the audio from keyboard directly into Daw or MPC X first. It doesn’t bounce sound from keyboard automatically like sounds that are already in MPC
@@BoloDaProducer what stand are you using for your equipment?? Dope vid. I just got the fantom 6 to go along with my live 2
@@braintraxmusic I’m looking for this too. That stand.
@@BoloDaProducer What's the best way to capture the audio from the Roland. Do you sample it into the MPC while the midi notes are being triggered by the MPC?
Bolo, is your sampler input set to in? I am not hearing any sound without either a audio track set to in or sampler input set to in.
I have in on track input monitoring. Mine was doing the same. I’ll most likely me a full video on my subscription page on how to do it
I am not able hear any sound coming out of the mpc headphones. I can see that input and output on the mpc when I play my keyboard.
Bolo great tutorial. I want to do the same with the Dgx-670 any help . Thank you
Thank you! I’m hooking everything up right now as I type! But I don’t have 2 end usb so I gotta use midi for a day or two 😂
Bank msb/lsb is a gamechanger!!
Brother this was truly a help I run a Casio and I think I can do the same thing with a Casio thanks a million
Dear Sir,
I recently purchased the Rowland FA 06 Keyboard and have encountered an issue with some of the buttons not functioning properly(Enter Exit,Shift, up,Down,left, right,Dec and INC). I kindly request your assistance in resolving this issue. I am unsure if these buttons require specific settings to be assigned in order to function properly. Could you please advise me on how to resolve this issue?
Thank you for your attention to this matter.
Kind regards,
I also have both the Fantom 6 and the X and this is just what I needed to do. Thanks for the advice.
That’s crazy! Fantom 7 and the X over here! That was much needed info OMS 💯💪🏾
Any issues using Roland Fantom 6 with MPCX
How did you make the USB connections between the two. The Mp x and the Fantom 6. I have the two of them and I am trying to connect them up.
@@TeleporterM11 hey I have both to did you figure it out just asking
Did you ever get your fantom 7 working with the mpc x I got the fantom x6 and the mpc x but I’m getting no sounds out
Hey wassup Bolo, I really need you to get back to me on this one man... I Recently bought a Roland FA-07 to go along with my Mpcx, I followed along with all of your instructions on how to pair the two devices. But for some reason I still can't get the audio from the Roland to come through the Mpcx.. Some advice when you get a chance would be very much appreciated big guy.... Thanks in advance...
Make sure in each track the record button on MPC is on. And make sure audio monitor input is set to Auto
I'm having the exact same problem with my Roland FA07 and MPC Live 2. I hooked them up EXACTLY like Bolo does...made sure all the settings were correct on both devices. I get nothing! I see the level bars going up on the MPC but there is no audio. I know it's probably something simple but so far no luck.
I got a fantom g6. I can get everything to work but I can't get the sounds from the fantom to play onto the mpc. Can anyone give me some suggestions on making this work?
Are you running your 1/4” cables out of your keyboard and into your MPC?
@@jamesonvparker yes. I can get it to play audio from fantom to mpc or as a midi controller. However, I can't play audio and midi together using the fg sounds.
Thanks for the video. I have followed every step to the T. But I can’t get any sound from the mpc when I am using the midi channel? I do see the signal light for input and output working when I press keys on the key board. I can also go to another track within sequence and I hear Audio coming from my speakers and headphone, so Audio is working for the mpc. Lastly if I plug my headphone in my Roland, I can hear Audi coming out.
It just I can hear any Audio from the midi track no matter what channel I go to!? What am I doing wrong please...
Make sure the gain 1and 2 jobs are turned up. If you got it plugged into 3/4 make sure that knob is turned up. Make sure the main and direct knob is in the middle. Make sure on track the record button is red and says Auto underneath. If those don’t work. We might have to do a one on one, but I charge for that.
How do you feel about the Upgrade to this FA, the new 2022 FANTON 0?
Can this be done with a Roland gaia sh-01 and mpc one? Not as fancy of a keyboard but I jam with it.
How do I separate my midi tracks ,example Roland Piano , track 2 Roland bass. Cause I change track add midi program but it stays on the same midi track a changing sound changes the original recorded sound, can you help?
Appreciate your videos I have a new MPCX I followed your directions , I have one problem in computer mode recording will only allow me to do 4 bars and stop recording when I hear it in play back it only goes to 4 bars when I have set it for 8 or more , in standalone it's all good, is there some setting in the software that I can change it.
That’s weird I’ll look into it if you can figure it out
That's a dope idea way of saving and I remember we used to have to load them in manually when we used the sound modules. What category do I look under in my JunoDs88 to find the Msd and LSD patch bank numbers?
Wish I got the black edition.looks so sweet. But sir you are a Professor. Thanks for sharing your expertise.
A timely tutorial. THANKS. My Nord Lead A1 is impatiently waiting for its MPC One to communicate in midi, and keep (memorize) its sounds (program changes) in each sequence. Am I okay there?
Just subbed!
Just bought a Yamaha MODX8 and trying to sync my MPCX!!!
Good luck, I got rid of my Modx 2 twice. It connects but it’s a pain to get it working right. That’s why I got the FA-06
@@BoloDaProducer no problems so far...
But your info is invaluable bro!!!
Good video. What’s the name of that stand?
How can I hook up my keyboard using midi cable's. I have a Casio wk-1300 and I have a MPC ONE
@Bolodaproducer can the pads trigger the keys in USB midi?
Yes
@BoloDaProducer Thank you my brother 💪🏽❤️❤️❤️. You have the only video that explains this thoroughly Bro. Many many many Big thanks 😊 💯
Will these same steps work with the Roland Fantom 6 and the MPC one
Yup
Have you done a video explaining converting the midi tracks from the FA-06 to audio tracks in the MPC?
Hey big bro, I need your help..I have a mpc one and just got the Rolland fa 06. I watched your video on connection however my Rolland is not coming up on the mpc. Can you help me out?
Hey Bolo, or anyone else that has these two pieces of gear, I'm having trouble figuring out how to put a synth from the Fantom 06 into the MPC One, and get that synth on the Midi channel 1? On the Fantom 06, the sound is on part 7 in the zone select, but I want it to be on midi 1, not midi 7 or part 7? How do I take the sound from midi 7 to midi 1 or part 1, in order to play it into the midi 1 on the MPC One? I hope this isn't confusing, but I can't figure it out? Is there any way to transfer the channel 7 to channel 1 on the Fantom 06?...SBN RESONATE
Very useful thanks for the video. Can he ask you, is it possible for the Phantom to control the MPC and everything is synchronized when you change the tempo of the Phantom to change to the MPC as well?
Can you do a video with the mpc x and the korg kross 2 I having trouble.
is it the same process for the controller set up?
Kind of. Maybe 1 or 2 things differently
Bolo, when you're working on the mpc x, you always use stand alone mode and than you transport it over to your DAW
Am I correct with my understanding
Most of the time
@@BoloDaProducer I Alesis DM-5, Roland JV 880,and Roland Juno 106 I like to use with the mpc x
Is it best to use a mixer or can the X handle it
My Phantom 06 is going to be my contoller
Am building a rack with some analog equipment
Sounds on the 880 is killer
Bolo I need you help, I am using the Fa-08 with the Zenbeats software conected to my Mac Pro 2013 with the Big Sur os, I can record the audio from the keyboard, I have try everything, can you help me. Using the usb connection.
Is the Roland being recorded as midi tracks or audio tracks with this setup?
Midi
Did the USB cable come with the Rolans FA06?
Yes
@@BoloDaProducer So can i add a guitar, microphone and a vinyl player easily as well?
Good stuff Bolo, thanks for sharing I have both pieces of this equipment. Now I can Manage my workflow. Let me know where I can find that stand you have for the MPC X, so I can purchase it. I also have that keyboard stand, things will fit right into place for me. Thanks again Bolo. You da man!
saved the day, thank you. what kind of stand is that?
Do you have to use the main / direct knob in order to hear the synth? When I mix in the direct sound it lowers the output of the internal mpc sounds (drums) etc anyone else experience this?
Hi ,,,also do I use stereo or mono jack leads ,,,thanks
Stereo
Thank you 👍
Bolo can you please tell me how do I hook up my fa o6 to the mpc software off the computer
So I have a Rowland Fantom-s I do not see it connecting to my mpc x when you go on the x into preferences sync/midi I NEED HELLLLLLLPPPP PLEASE
Can the MPC save all the midi keyboard presets patches in a project folder and be able to load them in without turning on your keyboard synth?
Yes, but you won’t be able to play any sounds because the patches are just midi information
Everything worked fine except I can't adjust the volume of the Fantom 6 with the MPC. Would i assume tmu can only adjust the volume of the midi notes with the Fantom?
You can adjust channel volumes but master volume of Fantom has to be up
Ok Thanks!!!
Great video but I can get any sound
I have watched this video many many time
I think you are leaving out something out like what are your Input and output set to in the sequence section set to
how about a one on one session please? do you take a credit card or Paypal?
What keyboard, mpc stand is that? I also have the Fa-06 and mpc x and have been looking everywhere for a stand like that.
This video is just what I needed thank you but my own problem I have the MPC 2000 XL still and I want to do the same thing but run the MPC through the Roland08 to record and keep all data can I do that?
I have a motif xf6 and I'm using midi everything seems fine but when I play certain keys on the motif the note is sustained why? I'm using the REN
Not sure, is the motif set as slave?
Hi again,,,just a quick question please ,,,I am getting my FA06 anytime it's on its way ,,,so I am going to link this up with my mpcx as to your video,,,however I currently have my speakers going into the inputs 1 and 2 on the X ,,,,,so would that mean I could plug the FA06 jacks onto the main inputs on the mpcx,,,,would that do the job,,,sorry if this is a stupid question ,,,thanks ,,,,,,,,,,,or would I be best to use the set up you have in your video,,,move my leads about etc ,,,😄
Use the same set up that I have, it will make your life much easier
Hi ,,,ok will do thanks 👍
Thanks a million, I've used an FA08 for everything so far, and just bought an MPC one, this is a very helpful video thanks. One question please.. can I transfer my songs and sequences from the FA08 to the MPC One, in a similar way to this when they're connected??
Thanks
Simon
Tattooed Balloon 🎈
No
Bolo where can I get that keyboard stand?
Can you do a quick video for the mpc connection with the same keyboard, please and thanks.
Will do
@@BoloDaProducer
Mpc one to be specific, thanks!
Don't forget, the info for MPC one link up with Roland FA 06 please and thanks.👍
Can this set up be done with the live
Nice video, Bolo. It answered my exact question without any bullshit. I would have said that you have a new subscriber, but I have already subscribed to your channel. Thanks a bunch!
Hey Bolo big dog man I just got the Fantom 06 can u drop the links to those 1/4 inch cables , and USB cable tht I’m go need to hook up to the MPC x and the Fantom bro ? I wanna make sure I order the right stuff u feel me
Nice so do u record to audio tracks for the audio?
Sometimes most of time I record into daw
What setting configurations are on/off on the Roland ? Mpc?
You got one to connect the FA to Logic? Need help
dope work bolo
I’m trying to record the midi data but I keep recording over my audio what a easy way to get my audio from my midi to my daw
The question i wanna know is can you also control the vst plugins, i have a fantom g6, i can control the midi but when i switch to plugin mode on the mpc xi can't play the vst with the g6
I have the Yamaha Mod x6 and mpc live trying to connect them together. Please help bro.
Yo Bolo! PLEASE tell me you know about the expansions for the FA..??? ALSO did you know you can load the Integra 7 expansions???!!! Man you GOTTA check it out!
Yes 👍🏾
We need “I REALLY DONT CARE” T Shirts lol
I need your assistance, please
@@rickymayfield4316 wtf you talking about
I'm trying to connect my mpc live and fa6 but having a slightly different issue
Can’t go wrong with all black!! All my lab is black, even my TLM.
Best video yet thanks bolo
Thanks
Good Day Bolo.. Man Im trying everything you saying In the video and for some strange reason mines is not working. I see something about Ableton live would that by any chance have something to do with it??? Also Big Bro How Do or Can we sync the MPC Beats Program To the MPC X...??? Because I wanna use my MpC X in stand alone but also use the screen to see what Im doing as well etc..
Never Mind Big Bro I just did it... lol I had to switch on the rear buttons on my MPC X... But Can I Still Control MPC Beats Program With My MPC X in Stand Alone...
I have a Roland FA06 and a MPC Live. I also have a Fantom G. I was wondering if all of this will work with the G and the Live?
yes. it will work.
Dope good looking out word
Hey bolo bro on my Fantom -06 is different from the FA 06 so my sync mode don’t have the option slave it says External,Internal, and Remote so which one would I go with bro
And another thing Bolo wht my Bank MSB and Bank LSB not lit up for me to tap on bro please help me out dog
What's up man, great video! I have moxf6 and I tried to follow the same steps but I'm not hearing any piano from my moxf and nothing when I hit the pads either. Any idea what I'm doing wrong?
Did you ever figure out how to get this to wok
What’s the stand you got for keyboard and Mpc X together?
Amazon stage keyboard stand
I can play sounds from my fantom on mpc but the keyboard doesn’t play at all need help
Is this possible for maschine +?
Yo kid I have the maschine mk2 and the roland fa08 and I'd like to know how to connect the two together can you help me out. Much appreciate
Good Job. Clean explanation...... no hoop la.......... straight forward and to the point.. Thank you !!!
Do you have a video for the mpc studio software
Yes
@@BoloDaProducer where can I find the video or the title?
Can you make a video like this for the fantom 6 ?
so sound is coming through the usb ? or the audio jacks?
MIDI is two way on the USB. Audio is going out the 1/4" cables on both devices.
Great video! I had a question i was hoping you or someone else on here might be able to help me with. Any help would be greatly appreciated. Im trying to connect my JDXI to my akai force. I have all 4 tracks from the JDXI loaded as individual MIDI tracks on the force. The problem is that if i change the loaded program for one of the tracks, it changes the loaded program on all 4 tracks to different programs. Is there a way to change the loaded program on each individual track, without it changing the loaded programs of the other JDXI tracks? If that makes sense.... I know its probably a simple fix, but Im stumped at this point. thanks again in advance for the help
Hi again ,,,I’ve managed to set my FA06 up with the X thanks to this video,,,respect thank you,,,,,,,,,,,,,,,,,so on track 1 I have X drums,,,,and on track 2 I have the FA06,,,midi 1,,,,great,,,,,,,but when I try and record on say track 3 using the Fa06,,,,,A,,,,it changes my track 2,,,,to the chosen new sound which I wanted to create on track 3 ,,,,,,,,,,,,,,,,,so how can I add another midi track using the FA06,,,,, onto the X ,,,please ,,,,,I hope this makes sense ,,,thanks again for your help 👍
Might have to do a video chat to figure it out if you haven’t already👍🏾
Hi ,,,sure that would be kool ,,,can you do it via zoom,,,,if so when would suit you ,,,thanks ,,,I am in the UK ,,,by the way 👍
@@N3na100 HEY YO I HAVE THAT SAME ISSUE DID EVER GET BACK TO YOU??
watching this on repeat especially starting at 4:44
Where can I get that stand?
Check out this Idea List on Amazon: Home recording Studio Products by Bolo Da Producer www.amazon.com/shop/bolodaproducer?listId=3TGW6BSKMDJBN&ref=idea_share_inf