ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2020
- I use ESP3D Library from luc-github
github.com/luc-github
ESP3D github page
github.com/luc-github/ESP3D
ESP library for arduino
arduino.esp8266.com/stable/pac...
Latest ESP3D releases
github.com/luc-github/ESP3D/r...
Complete tutorial
github.com/luc-github/ESP3D/w...
The 3D model of my printer, i designed it myself and too lazy to make complete tutorial for this.
drive.google.com/file/d/1_VF0... - วิทยาศาสตร์และเทคโนโลยี
Bro i want to use my marlin firmware 3d printer with esp to connect with a cloud server, any ideas how?
Using only a Nodemcu and Ramps 1.4/1.6? or do you need an Arduino Mega too?
Hi, never try before. However, this device work by giving signal to any board tx rx pin. so as long as you can get those pins active and connected to esp3d I think this should work.
Hello. Is it necessary to make any modification on the Marlin code to make this working?
Board with mega2560 no need such modification. I have modified my serial port configuration for my MKS Robin e3D in order to use this.
Hi sir, i need some help, when i try to upload my gcode, it says file write failed
Thank you very much for the video. I am using Arduino Mega with ramps 1.4 and I have the problem of not being able to move the motors or upload files to the SD card. Although it does register when I insert and remove the SD card. I would appreciate if you can help me.
pls double check pin connection board TX to esp RX and board RX to esp TX. Also dont forget to connect ground together.
just connect normal? you don't need to change the voltage from 5v to 3v? ... I thought if you called like that, it would burn esp8266 nodemcu v3
if you connect the power to vin pin, it will go through voltage regulator of the board (in case of node mcu) for bare board like esp12 or esp01 it will probably kill the esp (not sure since i have no experience with that)
Hi, did you connected directly?! did it burn?
Hi, sorry to bother you again
Im facing an issue while uploading the gcode it says (error 10) : "reset numbering failed" can you help me with this
thats problem with marlin, just try to simplify your g code name. only alphabet without underbar etc.
some i look in internet some people change from .gcode to .gco and works.
i dont know exactly which problem since i dont develop the code.
Yeah, im uploading the .gco file but its not working
And which version of marlin you used on your printer
@@vineethkonda2585 2.07?? i forget, i just updated to the latest one last month.
Hi, Great video, thanks! I got a problem, I did everything you did more than 5 times but the esp8266 can't connect with the printer on the esp3d website, I also changed the serial port but nothing different happened, I'm trying to solve this problem for days, could you please help me with that?
hi, can you tell me what board you using?
@@apinkeh My board is MKS SGEN_L V2.0
@@DartvenOp for non ramps i get connection to wifi module with port 1 :0 and port 2 :1
but since marlin doesnt support 3 port comm, you will lost your usb connection.
Hello,
i followed your steps but im having an error with index.gz file is missing can you please help me with this..
Hi.! please download the latest esp3d firmware, you should find it inside esp3d/data/index.html.gz
@@apinkeh yeah got the file, now everything is good
Thank you...
@@vineethkonda2585 hi can you show me and send link which file , as im also having problem
So i have oy the ramps 1.4 can i use esp with the ramps 1.4 to make a 3dprinter becase i dont have arduino mega
Theoretically you can since there are board with ESP32 available commercially. However, it will be non practical to re-route all of MEGA connection to match your ESP.
I have esp32 and I don't have any idea how to connect it to my printer bcz there isn't checkflaskconfg file into Arduino IDE
Nem szükséges! És ha elolvasod az E3D utmutatót, írja, hogy Arduino 1.8.x IDE legyen, valamint ESP8266 library max. 1.7.4!
Saya sudah ikutin alur tutorialnya bang tapi kenapa pas bagian akhir mau configuration printer gabisa ya? Jd alatnya gabisa dikontrol dri MyESP3D
mungkin bisa lebih rinci seperti apa kondisinya?
selama pake barang yang sama dan tx rx gak kebalik saya rasa pasti jalan sih
Kalo blh minta kontaknya bang (Line,Ig,tele atau WA) saya butuh bantuan buat selesain project ini 🙏
@@candrapuji376 tanya disini aja
@@apinkehboleh minta codingan Marlinnya bang? Soalnya saya pakai marlin 1.1.9 jg udh ganti2 Serial port dari 0,1,2,3 masih gabisa connect
@@candrapuji376 pake board apa?
Thanks
Hello, can i use ESP-12E
Then what I change in the ide
change board to ESP-12 in board manager.
esp32c3
Om kok nggk bisa upload file gcode knp? (Ada tulisan please use 8.3 filename only)
biasanya extension nya suka gak bisa.. ganti *.gcode ke *.gco biasanya masup
Sama aja om
Rayhan Nanda R kalo liat di github sih, marlin gak support filename diluar 8.3.. bukan masalah esp tapi marlin emng gak support.
coba file name nya lebih disederhanakan lagi jangan pake karakter yang aneh2
what if we use 2 or more esp8266? how to connect if all have same ip?
when connected to one of your esp, please change "client station" rather than "access point" in the wifi configuration on the web interface.
the isp will act as a client. connect to your home wifi and type your new esp IP in browser
@@apinkeh are these ip will always changing?
@@mycinemax2653 im not sure, but i think it will if you reset the esp. you can provide continuous power to the esp seperately if you want to keep esp on all the time
Hi Bro... Do u have any guide to make 3d printer like yours ?
Hi, i made it long time ago so i not sure if i still have the 3d model or not. i will look for it and put the link in the description.
@@apinkeh can you please remember atleast which website you download the stl files bro ? Like thingeverse etc ?
@@vignesh_waran this is my original design.
@@vignesh_waran i put the STEP files in the description. please check.
@@apinkeh Thankyou so much Bro !
i have: Compilation error: WiFiClientSecureAxTLS.h: No such file or directory. can u help me?
ello. I followed all the steps as shown in the video and got the same error code. Is there any workaround to fix this problem?
@@TAJPEJ84 I had to reinstall windows because nothing else worked. then everything worked fine
@@KASPERS-pv5px I also tried installing an older version of Arduino, which also gave me an error. I also tried an older version of Esp8266, which also indicated an error.
The installation of "CheckFlashConfig" in the video was successful, the Arduino did not find any errors.
Inferring from this, the problem may be in the downloaded program in the video, because it seems logical. :(
I would like to update my post, strangely, Arduino Ide did not install the necessary program, there was an error. I've tried Visual Studio Code with success.
Unfortunately, there is no connection between the printer and the website. Is it possible to enable this in the Marlin program and reinstall it on the 3D printer?
@@TAJPEJ84 i have this problem mee to, but i have 't found a solution to solve It.
The printer isn t able to move, on the printer i can't see the IP
bang kalo di pake buat upload gcode ke sdcard ajah bisa ngga??
bisa cm kcepatan nya kayak serial aj 115200 bit per second hhe
whats is the location for GCODE file ?
which gcode?
Hi i need your help
File index.html.gz is missing, please upload it
this show when connect
Hi.! please download the latest esp3d firmware, you should find it inside esp3d/data/index.html.gz
@@apinkeh can u sen me the link pls
is this the one
github.com/luc-github/ESP3D/releases/tag/v2.1.1
i tested but same problem
@@apinkeh can show me on a brief video clip?
declancsl@gmail.com
thank you
You mean inside folder esp3d > data> index.html upload using firmware upload?
@@declanchengcsl i mean, after you connect to your esp there will be question about the index.html.gz
if so then upload the index.html.gz from the folder i show you before
How to make file gco
Can you do this with Stock ender 3 pro board
yes you should be able to do. There will be some challenge to do soldering directly on the microcontroller pinout to get access to TX and RX.
found this useful article online, check and give credit to him
ciesie.com/post/ender_esp/
can you make a video on how to install on esp32 dev module
I dont have esp32, too expensive for only this.
@@apinkeh can you tell me how to do
@@BrourPro I will try change the board in arduino IDE. if its doesnt work, probably its time to google.
While compiling the esp3d code,I will get the errors like missing some libraries
WiFiclientsecureAxtl.h such file dictionary missing
@@dasarilakshmisrinivasarao2400 go in the document where there is the folder esp3d and enter in librairies folder and copy everything from there to your arduino libraires configuration folder.
if it keeps showing you the same error, you will have to go in board manager in your arduino and downgrade your esp8266 board to 2.7.4 version
Ha elolvasod az E3D utmutatót, írja, hogy Arduino 1.8.x IDE legyen, valamint ESP8266 library max. 1.7.4!
is for ramps
as long as you can get tx rx pin amd ground any board can do