How to install a oil catch can on your mk4 Volkswagen
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Oil catch can set up. For scientific purposes only. This may or may not mess up your car. I recommend not running a filter on your can. #diy #automobile #mechanic #germancar #turbo #science
performancebyi...
www.amazon.com...
www.amazon.com...
www.amazon.com...
Or
www.ebay.com/i...
TikTok: vm.tiktok.com/...
Instagram: @gap_city_squad
#volkswagen #vw #funny
Email mikeroyce95@gmail.com
Send me some help PayPal: www.paypal.me/...
The mk4 has a Closed evaporation system, block off filter on can.😁🤘👍👊
Not if it’s been deleted
I don't think that's the proper way to do that. Dont it have to be run to the tip and atmospheric is a no no on these engines. Idk
I did end up putting a plug rather than I filter. I don’t own the car anymore but it’s still out and about. The reason I used the filter was because of some forums I read but some buddies on fb informed me otherwise so that’s why I ended up using the plug.
No offense,but you did this wrong,you have to have a vaccume source as oil will not run uphill,it needs to be connected into the turbo inlet(cold)side
You are correct that’s how I should have done it but it’s working good the way it is and haven’t had issues yet. I’ve seen people do it multiple ways this may be wrong but it doesn’t affect the car and if it did the parts for these cars are abundant
have you experienced oil leak coming from pax side of the vehicle? Not related to the Catch Can install although it will come in handy soon.
I haven’t had that happen with my car but could be quite a few things it just depends on if it’s an excessive leak or slow leak
Disclaimer there is more to this video that you should do if you feel the need to. Instead of running the filter on the catch can you can run a hose to the turbo inlet. I have seen it done both ways and I haven’t had any problems with the way I have it set up in this video. But some people might suggest the other way it’s entirely up to you how you do this also if your new to the channel and like the content consider subscribe to help the channel grow.
Great easy video… awesome job 👏🏻
Thank you
People! You don't need to connect it to the cold side of the turbo. Learn how positive pressure releases. I don't want that yellow shite in my turbo and intake.
?
Im completely confused on what you're saying lol where is it connected to the turbo at all?
I’m still not sure what you mean?
Does anyone who has installed this experience white smoke from the exhaust?
Where did you relocate the fuse box to?
Tucked away where the ecu is located
does this cause any pressure issues with the engine because removing the pcv / check valves?
Rather than running the filter you just have the catch can blocked off because it is a closed system
No one show this insulation how you do thank you
What about the hockey puck piece the pipe.originally come from? Can't just remove the pipes and leave.it.
You plug the hole. The catch can replaces the hockey puck.
Hola eliminas la pcv ?
That piece you pulled out is part of a t with another hose that goes to it. What did you do with that hose?
Same as the hockey puck at the back of the engine..... pikey comes to mind.
Where did you relocated the relay box?
Tucked away where the ecu is
What did you do with the rest of the fittings where did you connect them
What other fittings?
I bought all of the exact same things. And he missed a few key pieces you need the breather valve on top of the catch can unless you run it thru a T joint and back to the inlet pipe. You also have to block a hose you take off that he doesn’t say. Which is located under ur intake manifold.
@@Euromike read comment above
@@ItzSirenz all that stuff was already done before the video sorry for leaving that part out
Tendras el link de todos los accesorios
Everything is linked in the description below the video
Muchas gracias
😍😍
En Amazon no venden ese kit amigo
no es un kit cada parte fue comprada individualmente
@@Euromike podrías pasarme el link mi hermano de dónde puedo comprarlo
@@albertomoreno9016 Oil catch can
performancebyie.com/products/ie-breather-adapters-vw-audi-18t-20v
www.amazon.com/EVIL-ENERGY-Degree-Fitting-Swivel/dp/B07589GWM1/ref=sr_1_14?dchild=1&keywords=an10&qid=1589746592&sr=8-14&th=1
www.amazon.com/EVIL-ENERGY-Degree-Fitting-Swivel/dp/B07586537G/ref=sr_1_14?dchild=1&keywords=an10&qid=1589746592&sr=8-14
www.amazon.com/EVIL-ENERGY-Stainless-Braided-Universal/dp/B07Z4R36BT/ref=sr_1_6?crid=1GI2RUFEDVUHM&dchild=1&keywords=an10%2Bstainless%2Bsteel%2Bbraided%2Bline&qid=1589746672&sprefix=an10%2Bsteel%2Caps%2C228&sr=8-6&th=1&psc
PWR FEVER Upgraded Baffled Oil Catch Can with Breather Filter Kit Aluminum Oil Reservoir Tank with 3/8" Strengthened NBR Fuel Line Black 400ml a.co/d/3539EEe
@@Euromike gracias amigo espero isi agan envíos a Guadalajara Jalisco
@@albertomoreno9016encontrases los accesorios. Yo también los ando buscando .
Si los ayastes pasa el tip