How to Remove and Install New Grill on a 2013 Dodge Charger RT
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- How to remove and install a new grill in a 2013 Dodge Charger RT the Easiest way
Follow @dailydelinquency on Instagram and Facebook
Music provided by -
Copyright Free Music | Lil Uzi Vert Trap Type Beat "Roads"
www.youtube.co.... provided by CFM: cfmfreemusic.com
➜INSTA: bit.ly/2Yzkv9D
➜FACEBOOK: bit.ly/2VoGCxl
➜Twitter: bit.ly/2VmC76A
➜TH-cam CFM Official: bit.ly/2WIs4dB
➜SoundCloud: bit.ly/30lZAsc
➜Reddit: bit.ly/2JkCAV8
✯✯✯ OFFICIAL WEBSITES ✯✯✯
➜cfmfreemusic.com/
➜mgjproduction.com
[No Copyright Sound] Synthwave [ CyberPunk, SynthPop, 80s Song ] [ FREE USE MUSIC ] Aries Beats - STRANGER THINGS MUSIC
Support Aries Beats:
/ tracks
www.youtube.co....
/ aries_4rce
/ aries4rcebeatz
www.exmge.com/
free-songs.de/...
free-songs.de/...
www.amazon.de/....
Plain, simple and straight to the point thanks
Great video. Thanks for getting right to the job and not wasting time with a bunch of useless info in the beginning
Rian pettus hate those videos haha thanks brother!
Aww, we don't get to hear about what you ate for the last five days, pictures of where you went to school along with funny yearbook photos, last three girls you dated and why it didn't last, last four projects you worked on and what you favorite color of bike is?
i actually like the stock grill more than the customer ones, makes it stand out more
Same !
where do we get the special screwdriver, and the grill? Needed to get back there to mount a PA speaker which is how i saw the video, but might as well swap the grill at the same time anyways :D
Thanks to this video I had a courage to try it myself. Results: I think I proud that did process of the grill surround detaching and attaching it back. Together with this, few annoying difficulties probably will stop me to repeat the thing and here they are:
1. The work should be done in appropriate place with lots of space and good lightning condition.
2. Having proper tools - THIS IS THE MUST of the procedure. I waisted so much time, trying to unscrew the 4 cross screws with simple ratchet from Walmart, was ready to give up every minute.
3. The second person who can assist (holding a flashlight, or helping with falling bumper cover) - huge benefit
4. Taking the grill shell out was absolute headache. These guys are pros, looking this video, I thought, the shell just need to be pushed out, while pushing some plastic "tongs". Incorrect - there were something like 12 clips around the shell, during procedure, I broke 2 of them.
At the end - I done it. Will not detail about my disappointing trying to repaint it.....
Congrats my friend... you stepped out side of your comfort zone and did something new although challenging, conquered it ! Im glad we could help you out and save you some money and give you the pride of doing it your self! Makes me feel happy for you brother! I hope you gained confidence to do more custom modifications.
@@DailyDelinquency Thank you very much for the comment. To understand the real level of effort required - was very important experience.
It's not that bad actually, it just requires some creative thinking and a bit of force when it's necessary.
1. I did this in small garage having maybe one meter between the front of the car and the wall, on each side I had less than 50cm, barely to squeeze in. That was enough to lay down on each side and do the job. In the front I also did not need that much space, you just have to pull it enough to get your hands inside and see something.
2. Set of tools I used is: 1/4" ratchet with 10mm socket and sort of medium philips head, one long flat screwdriver, old credit cards (I use them as spacers to avoid scratching the paint) and old, bent fork for clips removal.
3. Creative thinking my dear. I've just put 5 liter bottle of roundup in front of the bumper and it was the perfect height to hold it in proper position. I'd really recommend getting head light. Those are dirt cheap and make any kind of job much easier. Even though I used it, I've just put this above radiator to have some illumination inside. It really does not need any helpers.
4. Yes, this was a headache. I actually removed 2 additional screws on the bottom to pull out the mesh first (it unclips with the large clips from inside and you can push it in and take it completely out). Then I had much better access to side clips and I used long flat screwdriver and credit card to pry them (those "tongs") and pull the shell out.
The problem with those side clips is that they tend to bite the plastic and even if you try to pull them out, they may break. With proper tools maybe you can do it quickly and easily but with no tools to remove it, I'd rather pick the way I did it again. Two screws on the bottom sides out, take the mesh out, pull the shell and use screwdriver from inside to pry each of those little tongs. They get out quite easily this way and you will not damage anything. The credit cards turned out to be quite useless, they only sometimes work. I actually used them to push the fender plastic covers back in place without damaging anything.
It's always a trial and error but don't say that it is that complicated and demanding, most people with some basic manual skills should be able to do it one way or another with no help and just a basic ratchet with 10mm socket and medium philips head. I actually used regular philips screwdriver for the first 4 bolts holding the shell and mesh together but the last two did not have enough space to squeeze it in. Correct size of the philips screwdriver is necessary as those bolts may be already rusted. Wrong size will just strip it completely but you will feel if you turn the screw or strip it.
Anyways, this video was a great help in figuring out where to look for bolts and clips although I did not expect that removing the ones on the sides will be that much of a pain. I even think that it might be safer to do it my way as you never even put anything near the paint, no worries about scratching or chipping anything.
Super helpful video, thanks guys 👌🏻
That was for the upper grill what if you want to replace the lower grill I have a 2012 and I wanna replace both grills upper and lower
Where did you get your hood bro?🔥🔥🔥
Thank you!
What is the tool being used at 00:30 and the special tool recommended at 1:12?
What tool did you use to remove the four screws?
www.amazon.com/MulWark-Profile-Ratchet-Quarters-Screwdriver/dp/B07D4DZB1T/ref=sr_1_1_sspa?crid=IL7V5NXYKROW&keywords=90+degree+ratcheting+screwdriver&qid=1678478596&sprefix=90+degree+ratcheting+%2Caps%2C105&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFaR0JJVkJJRkxEWDYmZW5jcnlwdGVkSWQ9QTAyNjc4MDkyOFo3WEgwNlY3VzRGJmVuY3J5cHRlZEFkSWQ9QTEwMTA2MjMxSTRBOERFOFQ3UjlYJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@DailyDelinquency thank you 👍🏿
Iv been looking all over for a hood like that sir! I need some help
Can you link where you purchased the grill?
Great video!!!
Great video. Just installed mine and this helped a lot
I need to no what size and how long the screws or bolts from the grill assembly to the bumper are my car didn’t come with it and I’m installing the same grill but I have to put the back part on first. Thanks
You know the size of the 4 screws that's been took out the grill ?
What size are the rims & tires? 20x9 or 22s.Tires? Nice set up
So good video, thank you! Is it possible, without partially lowering the bumper, somehow squeeze the hand and unscrew 4 screws that hold the grill surround?
Thanks! I imagine if you have small hands this may be possible. We just did this because as you can see there was no way our hands where fitting down there lol
@@DailyDelinquency Thanks a lot for reply, appreciate. Yes, I can guess, the space is extremely narrow. The video so detailed, it makes me stop to have a concerns and try it myself.
great vid !
is there a way i could just pop the grille out and put a new one in? or no
unfortunately no, but if you follow the instructions i show step by step how to do it properly. its not too hard
What kinda hood is that
I bought the same grill and I installed it myself and now I hear a whistling noise coming from the grill everything is tight I don't understand what's that noise did yours do that
hmmm no double check your edges are popped in all the way we had a few spots needed to be worked in real good with some force
What good is that?
Thats whats up.
What’s the name of the grill?
So need to take off the front wheels??
no
Would this process be pretty similar for a 2014 sxt?
cant say for sure but I would think it would be exactly the same for the most part
It’s the same
Name of the grill or where can I find it ?
not sure exact one but i do know it was an ebay special
Mmm idk gets rid of the aggressiveness. Makes it look like a Bentley front end
FYI for those with fat fingers and doing it by yourself just take off the whole front bumper
Let’s do a how to keep my system from sliding around!!
video starts "today we are building a walled system"
I always find that briefs or boxer briefs work better than regular boxers.
Emmm don't you think the new grill has more air restructuration? because you basically you doubled the grill ?
instructions unclear grill not cooking my steak
LOL