ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
My best idea to finalize Ruixin Pro RX 008 knife sharpener | Upgraded Knife sharpener Ruixin Pro 4.
ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2023
- My best idea to finalize Ruixin Pro RX 008 knife sharpener | Upgraded Knife sharpener Ruixin Pro 4. For all the time I have been using the Chinese knife sharpener Ruixin Pro RX 008, I have improved it more than once. I have implemented many of my ideas to bring this budget knife sharpener closer to the level of professional knife sharpeners. But the idea that I brought to reality in this video is the best, and it brought the Ruixin Pro 4 sharpener closer to the level of professional knife sharpeners.
#Ruixin #RuixinPro #RuixinProRX009 #RuixinPro5 #Ruixin009 #RuixinRX009 #sharpener #Knifesharpener #Upgraded #diy
▰▰▰▰▰▰▰▰
🏆 💚 ► My best modular professional knife sharpening system and other cutting tools - Hapstone - hapstone.pro/?...
▰▰▰▰▰▰▰▰
🔔 AMAZON
💛 Ball Bearing 5x8x2.5mm MR85ZZ
● amzn.to/3ZGCk5C
💛 Bushing bronze 10 X 16 X 20mm
● amzn.to/3ZRa2W2
💛 Plastic linear bearings RJ4JP
● amzn.to/3mZXuxT
💛 RUIXIN PRO RX-008 Knife Sharpener System
● amzn.to/3JHFoXT
● amzn.to/3Dehell
● amzn.to/3wE9nwh
● amzn.to/3utyRcX
● amzn.to/3wGoiGs
💛 ► Knife sharpener Ruixin Pro RX 009
● amzn.to/3gKkLkQ
💛 ► Rack lift for Ruixin Pro
● amzn.to/3JSue5l
💛 ► My Best DIAMOND SHARPENING STONE
● amzn.to/3icDgPt
● amzn.to/42nopnF
● amzn.to/3YVkafX
💛 ► Neoteck goniometer electronic:
● amzn.to/3JBKeHE
● amzn.to/3JwpOiT
💛 ► Sytools Beast - BEST Knife Sharpening System
● amzn.to/3kFXoed
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
📌 Aliexpress
💖 ► Ball bearings MR85ZZ 5x8x2.5mm
● s.click.aliexp...
💖 ► Bushing bronze 10 X 16 X 20mm + 10 X 16 X 16mm
● s.click.aliexp...
💖 ► KingRoon 4 шт., plastic linear bearings RJ4JP:
● s.click.aliexp...
💖 ► Knife sharpener Ruixin Pro rx-008
● s.click.aliexp...
💖 ► Knife sharpener Ruixin Pro RX 009
● s.click.aliexp...
💖 ► Rack lift for Ruixin Pro RX 008
● s.click.aliexp...
💖 ► Platform for Ruixin Pro RX 008
● s.click.aliexp...
💖 ► My Best Pro DIAMOND whetstones + Leather
● s.click.aliexp...
● s.click.aliexp...
💖 ► My Best DIAMOND SHARPENING STONE (4-th year in operation)
+ Bar with leather / Pasta Goi / Polishing stone "Ruby"
● s.click.aliexp...
● s.click.aliexp...
💖 ► Diamond whetstones for sharpening 150*30
● s.click.aliexp...
💖 ► My Best WHETSTONE on aluminum base
● s.click.aliexp...
💖 ► Neoteck goniometer electronic:
● s.click.aliexp...
● s.click.aliexp...
● s.click.aliexp...
💖 ► Sytools Beast - BEST Knife Sharpening System
● s.click.aliexp...
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
#Aliexpress, #KitchenKnife, #knives, #knife
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
💙 I recommend subscribing:
► / @arttemamix
► / @arttemabuy
► / @arttema
► / @arttemashorts
► / @buybestweb
► / @webestop
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Thank you for your support! Peace, Goodness and Love to You!
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
![[Official Music Video] ฝังใจ - BOW Maylada [Prod. By Tan LIPTA]](http://i.ytimg.com/vi/rSjk1jKWRN4/mqdefault.jpg)
Thank you for doing this series ! I just grabbed the bushing and bearings and It's such an improvement. Cheers 👍
Thank you very much for your support and feedback. Peace, goodness and love.
Здравствуйте ! Вы собрали устройство Профиль ))) Очень круто получилось !
Здравствуйте ! Спасибо за поддержку. Мира, добра и любви.
There is so much snobbery on knife sharpeners it makes you laugh ,you only have to do a search for this one and youll see what I mean, its great you have taken the snobs to task thank you for this video. I've just ordered one.
Thank you very much for your support. Peace, goodness and love.
Я обошелся только бронзовыми втулками, получилось лучше, плотнее. Надо только подогнать наружные диаметры, передняя втулка чуть пополнее и покороче, потом обрезал на длину 12 мм. А обрезок подошел как дополнение к задней втулке. В качестве оправки использовал существующий вал, на суперклей прихватил втулки, зажал в дрель и напильником, 5 минут обработки и порядок, главное, не провалить, сделать плотненько. В задней втулке бормашиной 2 пазика выбрал под существующую пробку с винтом.
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
I saw how you did it in another video. I also found the plastic linear bearing in the #10 size! Don't have to drill them!
There, the inner and outer diameter must match. That is, it should be 10 by 15 mm.
@@ArtTemaMix RJ4JP-01-10 was the part number. All the same except the last two digits. Okay, I might have to exchange them and modify the RJ4JP-01-08 like you did! Thanks!
yup, they won't fit. I have it under control!
They should hire you to perfect the system
Thank you very much for your support and feedback. Peace, goodness and love.
Harganya berapa itu ?
Lengkap dengan asahan dan alat ukur kemiringan
What is the best you've tested so far?
Your channel is unique and awesome, nowhere can I find so much tests about this type of sharpeners then here. 👍🎉
If you mean which sharpener is the most comfortable of those I've used, then this is probably it HAPSTONE R2 and Sytools Beast
@@ArtTemaMixRuixin vs Rehoo???
Which one have better whetstones???
I think some of the alterations here are valid ideas. However, anytime I see someone using a "saw stroke" action rather than a stroke across the full length of the blade, I have to question how much they actually know about sharpening or blade geometry. It's impossible to maintain a consistent edge with that method.
Are you a push or pull guy? Genuine question.
@Fosdos4790 I tend to use a push because it's the best way to develop the burr quickly without losing a ton of metal. It's a combination of the push with a lateral motion to sweep across the blade length. And I tend to go from blade tip to the ricaso so I don't "fall off" the point and blunt the tip, or conversely draw short and not complete the stroke in an effort to avoid rolling it.
@@barbarianatgate2000 Cool, thanks for the info.
@@barbarianatgate2000 thanks again for the tip. I got my new diamond stones and adjustment rod in today and used the push method exclusively. My myabi is nearly as sharp as when I got it. Damn good tip sir.
@@Fosdos4790 @Fosdos4790 Very glad to have been a help. Had a guy teach me some stuff a long time back. I'm certainly no expert, but happy to pass on any tips I was lucky enough to get.
the image that shows this video is what I need. It has the shaft with the bearings installed and they are numbered 1, 2, and 3. That image with the dimensions would answer my questions. Thanks
Thank you very much for your support. Peace, goodness and love.
Zero the angle gauge on your platform, that way you don't have to stick stuff under the legs to level it.
Thank you very much for your support and feedback. Peace, goodness and love.
nice modification, but your part list is incomplete. You show several different plastic linear bearings and do not use the brass ones at all. You only listed one part number for the linear bearings. Did you need to replace the screw that holds it together? I'm not criticizing but I'd like to do this mod. I'm not a machinist but I can follow directions.
Sorry for the inconvenience. I will prepare a new video, I will demonstrate all the dimensions in detail. I adjusted the sizes for all the bushings myself, I bought only one size bushing. Thank you very much for your support. Peace, goodness and love.
Ya I bought the parts listed in the more section and they are all wrong. None of them fit and the brass ones are totally useless! I didn't see a listing for the small bearings you used either. If your going to show this at least give a complete and correct list
Greeting!
Could you please shed some light on what the purpose of this wonderful aperture was, it didn't really open, or was it the king's idea to keep the sharpening angle optimal???
Greeting!
This is an idea to improve the ease of operation of the sharpener. Now you don't need to pull the mechanism towards you, but turn the knife while holding the knife handle.
Ahaa. Thank from explane.
Здравствуйте, подскажите пожалуйста под какой размер вы просверлили втулки внутренний диаметр,потому что даже в замедленном видео не понятно под внутренний диаметр.Спасибо вам.
Здравствуйте, 8х15х24, но их нужно подгонять под точилку, то есть чтобы было 10х15
💖 ► KingRoon 4 шт., plastic linear bearings RJ4JP:
● s.click.aliexpress.com/e/_DCkqxS5
Втулка. Полимерный подшипник на Ruixin Pro RX 008 нужен RJ4JP или RJMP ? Вы подшипник разрезаете или как получается маленький?
Я используюRJ4JP, ведь он самый близкий к параметрам точилки, 10*15. Втулку, полимерный подшипник я разрезал, там можно из 1 втулки всё сделать.
@@ArtTemaMix Спасибо большое !
What the flat brass piece for of the base of the rack lift. Also why do
You have the bronze bushings listed what are they for
It is a metal plate coated with yellow zinc, I moved the lifter back. Bushings for a smoother movement of the mechanism.
o meu afiador ta inutilizado desde que chegou...veio mto diferente o angulo de um lado para o outro. :(
Thank you very much for your support and feedback. Peace, goodness and love.
Я правильно понял, что для модернизации были куплены удлиненный винт 30 мм и толщиной 3.8 мм, 2 подшипника MR85ZZ 5x8x2,5мм и 2 втулки RJ4JP-01-08.
Одна втулка была разрезана на 2 части: одна длинной 9.6 мм, вторая часть оставшаяся часть заводской втулки, а со второй втулки были вырезаны дополнительно 2 кусочка втулки по 3,8 мм. Втулка была была подогнана по внутреннему и внешнему диаметру. Все верно?
Я советую все размеры корректировать под вашу точилку, ведь бывает разница, хоть и незначительная.
😊😊
Thank you very much for your support. Peace, goodness and love.
So you start with nylon bearing then move to the heavy duty upright with a metal bearing....
Thank you very much for your support and feedback. Peace, goodness and love.
Попробуйте с таким узлом точной настройки наточить шеф 200мм... Напишите если получится.
Я уже не раз это делал, на моем канале есть много видео, вот например из последних - th-cam.com/video/H27T0MMLXJA/w-d-xo.html
@@ArtTemaMix Установите Узел на штатное место и попробуйте повторить Штанга в крайних положениях ложится на барашки точной настройки. Размах резко уменьшается...
Сколько денег было потрачено на всё это?
Выгоднее было бы купить точилка прифиль пионер😂 и пользоваться с удовольствием.
Это дешевое усовершенствование
Hey. I already have rx008 for about 1,5 year but i found that the angles are incosistent (mainly on clamp - knife on both sides has different position).
Is it worth to upgrade it or its better to get Sy tools K09/ ruixin r009 or something else with similar budget?
Thank you in advance!
Greets
I know that in a month Sytools should have a new good option for the same price, already with a good rotary mechanism and a rail for fine adjustment of the sharpening angle. I've pre-ordered so I plan on recording a video.
Всё реализовал) но подшипники шариковые не выдержали нагрузки. Сейчас заказал с Али набор) видимо плохого качества купил
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
What type of screw diameter is that 3.8mm does anyone know metric/imperial?
М4
Подскажите пожалуйста из практики, какой длины (оптимально) делать удлинительную пластину как у Вас в данной конструкции (пластина, на которую устанавливается реечный механизм. )? спасибо
От 3 до 5 см
Спасибо огромное @@ArtTemaMix
Como comprar um kit desse
Deixo todos os links na descrição abaixo do vídeo.
Доброе время суток. Можно ссылки где приобрести втулки и подшипники.
Доброе время суток.
💖 ► Подшипники шариковые MR85ZZ 5x8x2,5мм
● alii.pub/6qcmej
💖 ► Втулка бронза 10 х 16 х 20 мм + 10 х 16 х 16 мм
● alii.pub/6qcmf4
💖 ► KingRoon 4 шт., пластиковые линейные подшипники RJ4JP:
● alii.pub/6qcmg3
А кто заметил что он вертикальную стойку под ползунковую штангу подменил ?
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
A bit of verbal explanation would makee this video 10X better.
Thank you very much for your support and feedback. Peace, goodness and love.
Confused on the angle… 14+24!?
I didn't understand the question.
@@ArtTemaMix Thanks, I'm trying to understand the angle setup. Was the first angle negative ~14 degrees, and the second angle positive ~24 degrees? Then the total would be like 38 degrees? Not sure if I'm missing something or if that's the right angle for that knife. Asking b/c I'm trying to figure out my setup, like I'm going for 15 degrees, and I start with negative ~14.5 degrees so I'm adding 0.5 degrees to get 15 degrees, not sure if I'm doing this right. TIA
so, you added $80 worth of parts, and $200 worth of time to a $40 sharpener to NOT purchase an actual high quality sharpener? How about the stones? are they up to the task?
💖 ► My Best Pro DIAMOND whetstones + Leather
● s.click.aliexpress.com/e/_DDavMdP
● s.click.aliexpress.com/e/_DFpzRMh
Thank you very much for your support and your feedback. Peace, kindness and love.
Не чего не понятно.
Большое спасибо за поддержку и ваш отзыв. Мира, добра и любви.
@@ArtTemaMix свою лояльность засунь сам знаешь куда. Блогер Хренов. Из всех роликов половина не о чём.
I wish youtubers knew how to talk
Thank you very much for your support. Peace, goodness and love.
Seems like a lotnof extra “nerding” going on. I just wanted an easy “set up” video. Calibrating and extra testing seems like a bit much. And shaking the sharpener up and down incorrectly to sharpen makes me doubt the skills here . Youre not stroking the knife off. Long strokes not going at it like a horny teenager
Thank you very much for your support. Peace, goodness and love.
Pretty sure you got to give these kinds of sharpeners/stones same thing love you give yourself minus the lotion and tissue.
Чарли Чаплин блин!
Большое спасибо за поддержку. Мира, добра и любви.
2670р, на алиэкспресс и пару потшипников.
Большое спасибо за поддержку. Мира, добра и любви.