It’s all good I was like you a couple years ago and I have still do not have a firing system I enjoy fusing my shows and that’s going to be task this year as I have 24 cases of fireworks to fuse. Also I just subbed.
@@MileHighPyro-303 haha that’s awesome! Yeah let me know when you burn again. I’ll bring out some OL stuff. I just posted a stash video. It’s nothing crazy but all bangers
Thanks for the demo, I'm thinking of getting this same system vs the ignite. I have the small 12 cue version of yours as it is now, and its solid! As others have said, its tough to get the visco to light when taping to the MJG. They sell small plastic connections for the fuse/initiator that I've used with good success when going direct to visco. For cakes, I just use a non sparking punch where the use is and directly insert the initiator into the cake. 100% success rate with this method so far!
I'm definitely going to try the direct ignition in the cake next. Also tried inserting a very small piece of white quick fuse with the visco, and had %100 success. Unfortunately my camera failed on me and wasn't able to post that video.
I don’t personally own a system but I’ve had a chance to use one, from what I’ve seen people don’t actually connect to the fuse they insert them in the hole near the fuse to make sure it burns but connections are usually the failure point if it doesn’t ignite at all
@@MileHighPyro-303 all you really need is a brass poke tool to make the fuse hole big enough to fit the mjg wire the blue plastic tip should be able to slide back or you stuff the whole thing in the whole. I don’t know how well poking canister shells work because the wire would be in the tube but that’s something you can test out for a video
Hey pyro like the video and you're up front. I'm not familiar with you're firing system but I do have an IGNITE system. It's a little more simpler than but have had similar experiences. May I suggest you make a rack for your rockets so they fly vertical not on the horizon. I have a demo of one of my channel.WELCOME TO THE PYRO COMMUNITY!!👍😁🎇🎆💥 great pick ups also....
Appreciate the input. I will be building a rocket specific rack, so ill definitely check out your video. All i can be is up front and honest! Thanks for the support!
Mjg is mainly for cakes, you remove the fuse use a punch that wont spark to punch a hole and put the mjg inside that hole and tape off. the talon ignitors work best for this application!! Nice video!!
If youre going to go mjg directly to visco you need to splice in either 1sec/ft white/grey fuse between the mjg and the green visco. Green visco doesnt take to fire very easily. When you land your cues on the modules make sure you dont have your copper leads touching eachother and make sure you fold the exposed copper into a V before you insert it into the terminal for better contact. I hate talons, theyre trash. I could only ever see using talons for rockets fountains and roman candles. I go mjg directly into the lift charge of cakes and cans. Rockets fountains and roman candles ill go with the splicing technique above. Ive shot 1000's of mjg with not 1 failure. I had all the failures you had initially but that was all my fault not the hardware. Pyro on!
Can't stress enough how much i appreciate the input. Will definitely try these methods out next time! I'm sure me rushing through this had a lot to do with the failures. I've see videos mention pulling back the green strands to reveal the powder before connecting, i didn't do that either, which I'm sure would have helped.
Say pyro brother, with the name mile high pyro dose that mean you from Colorado? I’m looking for more pryo friends in Colorado to talk to about fireworks
BDH are not Small rockets they are 3" cocos shells Rockets they are supper supper overloaded Overloaded massive gigantic ginormous Breaks in the sky with deeper vibrant colors loud loud Salutes
Agreed, I picked up a case of it and was like crap..this is basically a coco shell lol huge! Heard nothing but good things about it. Can’t wait to light it off
Boomville gang popping up in my TH-cam feed now.🔥🎆🧨
Boomville!
Love those BSRs. That was the first case of any firework I ever bought! Super glad I got it
I need to find some more of those and find the master rockets.
Ty for sharing 🔥
More to come! Appreciate the support.
ty for the demo those rockets kick azz thumbs up
Appreciate it!
I have that firing system and have used it a few times, it works fantastic!!
It's been great so far!
Nice video brother!
Appreciate the support! More to come, stay tuned!
Yo brotha...I'm in salida Colorado. Nice pick ups.💯
Appreciate it man! How's the fireworks scene over in Salida?
Cool demo new sub can't wait to see what's next 🎉
Appreciate the support! Pallet landed today, new video coming up this weekend after my PGI cert.
New sub
Take out the fuse and put the igniter were the fuse was 🎉an tape it
@@pyropetey4983 that's definitely what I'm doing moving forward. Appreciate the feedback and support!
Awesome video man!!!! Keep it up.
Appreciate it!
It's all good bro I enjoyed the color thank you for sharing take care
It’s all good I was like you a couple years ago and I have still do not have a firing system I enjoy fusing my shows and that’s going to be task this year as I have 24 cases of fireworks to fuse. Also I just subbed.
Appreciate the support!
Bsr slapping!
Most definitely! Videos don't so them justice!
@@MileHighPyro-303 ohh yeah! I have a couple boxes of them. I’m also in the mile high I don’t know where to light them haha
@@Famsvison yeah I'm glad I took those out to an empty parking lot haha glad to meet another pyro in the mile high!!
@@MileHighPyro-303 haha that’s awesome! Yeah let me know when you burn again. I’ll bring out some OL stuff. I just posted a stash video. It’s nothing crazy but all bangers
@@Famsvison i did check out your video. We gotta touch base for sure. You on any other platforms to chat?
Definitely get you some talon ignitors man! Thanks for the video and keep at it!
Definitely on my list. I'll be doing another demo with some of the tips and ideas I've been given. Thanks for the support!!
Thanks for the demo, I'm thinking of getting this same system vs the ignite. I have the small 12 cue version of yours as it is now, and its solid! As others have said, its tough to get the visco to light when taping to the MJG. They sell small plastic connections for the fuse/initiator that I've used with good success when going direct to visco. For cakes, I just use a non sparking punch where the use is and directly insert the initiator into the cake. 100% success rate with this method so far!
I'm definitely going to try the direct ignition in the cake next. Also tried inserting a very small piece of white quick fuse with the visco, and had %100 success. Unfortunately my camera failed on me and wasn't able to post that video.
I don’t personally own a system but I’ve had a chance to use one, from what I’ve seen people don’t actually connect to the fuse they insert them in the hole near the fuse to make sure it burns but connections are usually the failure point if it doesn’t ignite at all
I'm definitely switching to a direct port set up to make sure they light on future demos. Appreciate the support and feedback.
@@MileHighPyro-303 all you really need is a brass poke tool to make the fuse hole big enough to fit the mjg wire the blue plastic tip should be able to slide back or you stuff the whole thing in the whole. I don’t know how well poking canister shells work because the wire would be in the tube but that’s something you can test out for a video
@@yglordco9793 likely wouldn't use these on canister individually. Would fuse up my rack and have one igniter light a quick fuse to start it.
Say one has the beans, and all in the box are yellow tops, would this mean they are all color? Or how would you tell the difference if not?
To my knowledge red is sound yellow is color
What was that, a Mastiff ?
2
Yes sir, Cane Corso (Italian mastiff)
@@MileHighPyro-303 Sweet demo MHP.
@@3ccdmike Thanks! I'll get better on the camera, i promise haha
Hey pyro like the video and you're up front. I'm not familiar with you're firing system but I do have an IGNITE system. It's a little more simpler than but have had similar experiences. May I suggest you make a rack for your rockets so they fly vertical not on the horizon. I have a demo of one of my channel.WELCOME TO THE PYRO COMMUNITY!!👍😁🎇🎆💥 great pick ups also....
Appreciate the input. I will be building a rocket specific rack, so ill definitely check out your video. All i can be is up front and honest! Thanks for the support!
@@MileHighPyro-303 always pyro brother 👍🎆💥
Where can I get bdh rockets
Wish I could tell you directly. Gotta do a little digging
Mjg is mainly for cakes, you remove the fuse use a punch that wont spark to punch a hole and put the mjg inside that hole and tape off. the talon ignitors work best for this application!! Nice video!!
That is definitely what i have gathered and will try next. Another demo vid coming soon with some small 200g cakes to test this method out.
@@MileHighPyro-303 Also when you punch make sure you use a BRASS awl and careful on 200g cakes you can overpenetrate smaller tubes more easily.
@@JG-PyroTX already got the brass awl on order. More videos to come using the system.
If youre going to go mjg directly to visco you need to splice in either 1sec/ft white/grey fuse between the mjg and the green visco. Green visco doesnt take to fire very easily.
When you land your cues on the modules make sure you dont have your copper leads touching eachother and make sure you fold the exposed copper into a V before you insert it into the terminal for better contact.
I hate talons, theyre trash. I could only ever see using talons for rockets fountains and roman candles. I go mjg directly into the lift charge of cakes and cans. Rockets fountains and roman candles ill go with the splicing technique above. Ive shot 1000's of mjg with not 1 failure. I had all the failures you had initially but that was all my fault not the hardware.
Pyro on!
Can't stress enough how much i appreciate the input. Will definitely try these methods out next time! I'm sure me rushing through this had a lot to do with the failures. I've see videos mention pulling back the green strands to reveal the powder before connecting, i didn't do that either, which I'm sure would have helped.
@@MileHighPyro-303 welcome! Great videos man, looking forward to seeing more with the efiring too
Talons can't be wired in series.
Thanks for the info, i did not know that.
Say pyro brother, with the name mile high pyro dose that mean you from Colorado? I’m looking for more pryo friends in Colorado to talk to about fireworks
Yes sir, i am from the 303.
Can I get a e-mail or Facebook so we can talk?
@@tbaby303 Getting this request a bit. Crated an IG with the same name. Look me up and DM me there.
@@MileHighPyro-303 I don’t got IG I only have face book
I wouldn't even bother with taignitors their total trash if the wire breaks crimps or anything happens it you're done it wont-work.
I'll try them just to know first hand.
BDH are not Small rockets they are 3" cocos shells Rockets they are supper supper overloaded Overloaded massive gigantic ginormous Breaks in the sky with deeper vibrant colors loud loud Salutes
They are absolutely gorgeous aren't they? Haha they are fun to launch.
Agreed, I picked up a case of it and was like crap..this is basically a coco shell lol huge! Heard nothing but good things about it. Can’t wait to light it off
Enjoy them!
Just get the P1200 from pyroboom😊
It's all the same Chinese make stuff.