ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2024
- Hi all ;) READ FIRST PLS!
On this video i just did a quick test to see if the original Nec/Tokin Capacitor is really damaged or not.
Replacing the Nec/Tokin Capacitor is faster done as to replace them with some Tantal ones, so thats why i just did this quick test with a Original working Nec/Tokin Capacitor.
After that you can test if your PS3 is working again or not, if yes, you can go on now for the Tantal Capacitors, if you like, if not, you can let it also like this, it will work again for some years, thats why keep always your brocken PS3 stuff ^^
Check this Tut. for more Info about replacing Tantal Capacitors:
www.psx-place....
Check this Video to see how you can Replace the Nec/Tokin with the Tantal Capacitors: • How to replace the PS3...
Recomented Capacitors: 470µF 6.3v:
www.ebay.co.uk...
Kapton Tape:
www.ebay.de/it...
Amtech Flux:
www.ebay.de/sc...
Heat Gun with Temperatur Display:
www.ebay.de/sc...
Feel free to leave a comment, Thumbs Up and dont forget to Subscribe :)
Be fair and feel free to Donate: www.Paypal.me/N...
Best Regards
NSC
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Dude I appreciate the no cuts your unlike most TH-camrs I see most TH-camrs do cuts and don’t fully show what they are doing which with you I greatly appreciate your honesty and tutorial as I jailbroke my ps3 fat and was able to pull the syscon codes off to my usb and read it was error 1002 and 2124 and it said error 1002 was nec tokin failure I’m going to save this video for later for a refresher as I’m doing it you sir earned yourself a sub
I treat you if you are one of the top YTers and you can laugh with your humor Good luck :)
Yes, would be a nice Dream :) Wish you the best mate 👌
No Problem Dude, I Follow you from the 1st Video
@@W2005. wow man, thank you sooo much, u a true guy ✌🤗
You can also change these with multiple tantalum caps, they last longer and imo easier to replace. Anyway, nice repair!
yes, i already know hat, thats why i did this video, now you can replace the tantal ones if you like ^^
@@NSC-Modz can i send you my phat ps3 for repair? If so hiw much
@@blkmhere Hello sure but im from Germany, you can contact me over WhatsApp, you can find my number on my TH-cam "Channel Info"
@@NSC-Modz I just realized that you did the exact same thing in a video a day before this one xD
and i did not read the description...
Greetings NSC, I'm an admirer of your great work. Gotta say awesome German engineering applies not only to cars but console repair as well. I have a CECHA07 60G (TW region) which has only recently started the symptom of unexpectedly turning itself off during heavy 3D game scenes, with 3 beeps and ensuing blinking red light. Before I noticed this problem just this month, I have not had powered it on for say at least 6 months, so it obviously has little to do with constant overheating. I have replaced the thermal paste (which didn't help much, still idling at 68c) and will do the PC ATX PSU test to rule out that possibility, as well as the syscon uart reader thing to get the error log and see what kind of codes are buried in it. My hunch is that most likely the NEC Tokin on the RSX rail has degraded over time, and thanks to your wonderful video tutorial, I'll know how to approach it when I finally reach that stage. Thanks again.
When it fired straight up, that was so cool... apart from the hdmi scare!... Great job :-)
Yeah, sorry, don't wanted to scare you guys, i just forgot if this HDMI cable was connected on the HDMI 1 or HDMI 2 Port, have sometimes to much stuff connected, so with the time i get confused my self ^^
Dr. NSC has given us another playstation surgery success
Did you by chance check the value of the cap you removed?
How did you determine which nec/toking oe128 capacitor was broken? Or, why did you only replace the one on the right?
At time = 36:00 he says that it is the most capacitor that usually goes bad. Replace the one next to it if the console still doesn't work.
Great work nsc and so clean its really the best keep it up my friend 👍👍
I try my best :)
Thank you so much for these useful videos! Planning on doing all new nec tokin replacements on my CECHA
Yeah, the one from the video is enough :)
NSC Modz I only have to replace one of the nec/tokin, not all 8?
@@smamsp not all, this can make problems, one on the RSX side and maybe one more on the CPU side. But not all. Pls read the tut. on psx-place.com from my description.
Where exactly is your tutorial on psx-place.com? Cannot find it.
Thanks for sharing your knowledge about fixing ps3's😎👍
I just try my best, thank you to very much 😇
Yo, i recently had been given a ps3 fat, and i wanted to cfw it, got another running with a reflow, but unfortunatly this one, after infinite tries reflowing with flux, does not want to boot, psu must be fine. Hdd led lights up for a sec, it actually looks like it try to boot for 3 sec than YLOD, Do you think its worth trying to replace the nec tokin? And wich nec tokin is the one that usually lose capacitance? Thanks in advance. Any suggestion from anyone is appreciated, give me hope lol.
Please watch My last video, thats happen to You???
Do you also clean the fan blades?
I've found that after cleaning, apply a car silicone wax with a Q-tip,
Then buff when dry, makes clean last much longer time, less dust.
I have tried my heat gun from 380-460c and all it's doing is making the tokin popcorn. Am I missing something or does my heat gun just suck?
Hi. Great video.
How did you know it was that particular capacitor, and not one of the others?
I've had my PS3 60GB for a long time, and it got the YLOD about 3-4 years ago. I took it to a repair shop, and it may have been reflowed by them (I'm not sure). But, about a month or two after being "repaired" it YLOD'd again. When I tried the system again a couple of weeks ago (I want to play some of the old PS2/PS3 games), the system powers on (Green light)...then the fan gradually increases in speed to maximum speed. The system displays a messaging saying it is too hot, and shuts down.
Following yours and other guides, I have opened up the system and noticed that the RSX had been de-lid'd previously. So I cleaned the chips and IHS's and applied MX-4 thermal paste. But unfortunately the fans still go high and then the system powers off.
Do you have an tips or suggestions of what to try next?
Many Thanks.
Yes how did you know which one?
Em primeiro lugar, parabéns pelo vídeo. Muito bem explicado, mas eu gostaria de saber porquê você trocou apenas aquele capacitor? Há alguma maneira de saber qual está com problema e trocar apenas ele? Eu quero fazer o procedimento no meu PS3, e no meu apenas, portanto, não tenho todo o material necessário nem vai fazer sentido eu comprar apenas para realizar o meu serviço... nesse cenário, há alguma forma de eu saber qual capacitor devo trocar... o que eu tenho é um multímetro simples... ou posso "adivinhar" qual "pode estar" com problema levando em conta a posição mais próxima da área mais quente do PS3 (CELL CHIP + PSU)? Agradeceria muito se pudesse dar uma explicação.
Olá :) Em primeiro lugar a melhor usare o Syscon Reader, assim podes ver mesmo o problema que tens. Os Tec Tokin normalmente são bons. Por favor sempre primeiro usare o Syscon Reader. Assim pode ser ver o ler os erros codes que a PS3 tem.
How do you know you need to replace that particular Nec/Tokin but not the others? My PS3 is also having the same problem and I got A0093004 from syscon. But when I measure the resistance for the Nec/Tokin, they are more or less the same (4-5ohm). So I am not sure which Nec/Tokin should I replace.
Awesome video! Do you know if the slim models have capacitors that could be used on the fats? Also, sorry to hear about your dog!
All ok, time does the rest my friend. As i know you can use some of them, not all but some yes ;)
the thing is... you're currently heating up the capacitors right now restoring some functionality to them. you would not know what is truly faulty. By default these are already poorly made out of factory. Just use tantalum and youre set for a long time as far as nec cap are concerned.
uhh NO xD Better use the Syscon Reader and scan the error logs ;)
Hi, good job where can buying tokin capacitor for ps3 fat 60gb yold light not working, thank you
First check if the capacitors are really the problem. If they are search for tantalum capacitors and make sure that they have the correct capacitance
I have a problem with my PS3 Fat, every time I turn on the power it turns off and I wait for a minute the power light just comes back on but I have to unplug the plug and wait for a few seconds to turn it back on and that's it.
Wait, how did you take off the Nec tokin without breaking it into pieces? Every youtuber I’ve seen do this couldn’t get them off so they broke them off
also how do you take apart that power supply? I’m not sure how to take that one apart
I have heat it up and desolder it out with a heatgun and flux, just like most pro doest it. But you can break them out, so it's better for the board, otherwise you could cook the board maybe 😅
@@NSC-Modz yeah, I think I’d just break them instead considering I’m kind of new to all of this. But for the power supply do I pull off the edge clips to bend them? I’m not sure because the only power supplies I took apart was the EADP-260AB And the APS-306. Which was easy because I had to pull the tabs back and lift it up
Just give NSC a heat gun and some flux and get ready for some magic.
Hehe it's Magic xD
Great video...
What is that liquid you inject around the nec tokin?
This is Flux, it helps soldering better
@@NSC-Modz and now you glue the nec tokin back on the board?
@@douglasschadek1255It’s called soldering, he uses heat to melt the solder (basically glue for electronics) and it connects it electronically, you cannot use glue for a process like this because it’s less precise and doesn’t transfer electricity like solder does
Hallo NSC! I'll travel to Germany next year, there is any chance of taking my PS3 to you for a repair?
Yes why not ^^
Not realted to this video, but I'm having trouble flashing with my CH341a with the software in the description of your tutorial video and any other I found, do you have a newer version that might work?
DO NOT FLASH THE 341X, you gonna brick it :/
Hi NSC! Congrats for your job! Do you perform this intervention for other people? Hi have a CECH04 unit with YLOD. If yes I’m interested. Thanks for your answer.
Sadly this is not a permanent fix. The heat changes the chemistry inside the NECs bringing them to life temporarily. I feel the permanent fix would be changing all NEC capacitors for the more reliable tantalum ones.
how to know if the ylod is caused by bad soilder ball under chips or those capacitors ? thank for replying me !
Was the Fan turning high so the PS3 was overheating, if the fan was turning normal, then it could be the NEC's
@@NSC-Modz oh no I throw away 2 fat ps3 with seem they are having bad capacitors, I thought it was the RSX/CPU :(
@@lunatic1911 :( shit happens....
@@NSC-Modz i was playing gta 5 which made my ps3 fat really loud. so rsx? ...
@@magnus00125 delid it
How to verify its (ylod) not from PSU ? mine makes a clique sound before ylod !
I think if its the PSU the fan wont start and it turns faster off than a usual YLOD.
Nice work again keep it up 💯💯
Thank you so much 😊
Serviço profissional Nuno, vou fazer o mesmo à minha duas ps3.
Muito Obrigado mano 👌
@@NSC-Modz brazilian too?
bom eu tenho um seca01 com ylod a anos tbm gostaria de saber se isso resolve de forma definitiva mesmo o problema.
@@Aztlantean Português 🤗 Isto aqui pode resolver o seu problema :)
Does this console still work? I’ve heard the NEC tokins only fix temporarily
Hi I see that you use the spreading method for thermal compound application but I just wanted to verify something. I read on a few online forums that the pea method works best. Which method do you recommend? I own a super slim model I'm just a little scared that I may apply too much compound and that it will flow over the edges of the chip onto the motherboard since the chips are smaller than the fat ps3 model. Anyways, thanks for your great and informative video! Still good to see people caring about ps3 in 2020.
Hello
To much is still better then to little, the pea method is not enough to cover all the IHS, that's why i do it like i do. I saw a lot CPU's that was not full covered with paste because they used the pea method. That's why i do i like that, and i do it since a lot years now, never had problems. To be sure that everywhere is paste, i spread a little all over the IHS, and to be 10000% sure i apply a little small line or a small pea over the rest.
@@NSC-Modz Thanks for the reply! I'll use your spread method then.
How do you tell if it needs these capacitors replaced? Or if it’s the rsx chip? I have a YLoD and I’ve replaced both those caps with tantalum ones. And I tried a reflow on the rsx and cell. But it still has the yellow light. I went to 500c on each chip, for about 5min. Idk maybe I’ll send it to someone who can diagnose better
Why do people say to reflow those when you get the ylod does that actually fix the ylod or do they have to be replaced
it unintentionally "restores" the nec tokin capacitors by exposing to the heat temporarily. It will surely go ylod again. Just replace with tantalum capacitors. GLOD is usually caused by bad soldering balls on the chips.
Servus.
Kann ichs eigentlich auch mit nem Offen machen mit 200°C?
Wie weiß ich ob ich vielleicht die PS3 gekratzt hab bei der CPU oder Gpu beim köpfen?
Odee könnt ich das auch mit dem Rebowling im Offen auch fixen? 🤔
Hey NSC great work as always, greetings from Russia my German brother! Quick question: wouldn't such high temperature damage the nec/tokin capacitor while you're heating it up to solder? Or it's safe because PS3 is turned off?
Lower the temp to 300 c when installing the new nec tokin... Not recommended tho, buy 470uf.. it is cheaper and lasts longer..
What model Ps3 are you repairing
well done like always brother :=)
Thank you soo much, you always welcome 😊
Love the videos. The damn capacitors are terrible. I wish I had a friend like you.
How reliable/long-lasting is this fix? It seems a lot easier to do.
If you replace them new original they gonna last again about 10 years or more...
Ich hab hier noch ne ps3 mit green light of death hab versuch reflow aber geht nicht. Meinste wenn ich hier die rsx capacitors mal tausche würde das was bringen? Hab hier noch n paar boards wo ich mir die caps klauen kann
Yep, wenn es nicht was anderes ist, dann schon :)
Are you sure that 380 degrees are correct?
Are you using celsius or farenheit?
My solder wont melt... the capacitors throw bubbles already....
You need some skills to do that, so please take care.
Hi, great videos, learnt a lot. Do you follow some sort of process of elimination methodology when deciding which Nec/Tokin is causing an issue?
For example is there a guide to check the voltages of the individual Nec/Tokin and what figures to look for to determine which one is/could be faulty and require replacement using a multimeter? Before having to dismantle/solder and de-solder anything?
I have a PS3 with YLOD, before spending any money I wanted to verify if it is in fact the Nec/Tokin causing the issue and not something else, so I isolated the Nec/Tokins with Kapton tape and heated 4 x Nec/Tokins and the PS3 powers on now. So I believe it in fact to be the Nec/Tokins being faulty.
Is it recommended to replace all the Nec/Tokins? Should you replacement them one by one?
Thanks.
My Ps3 turns off while playing certain games such as rdr1 and far cry 3 , but plays some games just fine like gta 5 , it also turns off when reaching the "22%" trophy on Tekken Tag Tournament 2 , already tried replacing the hdd ,but still, no joy.
What could have been the problem of the console?
A Jay I have the same problem, Tekken Tag2 and now TEkken DR has started the shut down. I have ordered some NECs to replace but it might be a while until they come
bist der erster, wem ich sehe, wer diese veralteten NEC caps, locker flockig runterbekommt! statt a heatgun, a richtiges heatgun! wusste daß das gehen muss! danke für dieses video! es bestätigt meine theorie Danke Dir! die eigentliche frage, die meisten sagen, daß wenn batterie fürs bios tot ist, (Du hast batterie entfert, toter kann a batterie ned sein 😂😂😂) daß es dann a problem gibt mitm account reconstruction, sprich gekaufte games, daß es da probleme gibt, hast sicher scho gehört, könntest bitte diesbezüglich was dazu antworten? wär Dir sehr dankbar!
Bro why only one chip... How meny nec tokin there on motherboard?!?! How to know if this broblume or the others?!?
Hello Yeah, you can do all if you like, it conforms the motherboard how much you need, on older boards you have 8 NEC´s
@@NSC-Modz my ps3 fat cechc04 the person that have this console not change the paste i open it little paste there... I think the gpu and cpu reballing need if heat eat the ball under this chip... After that see this video i think best way fix... 👍
@@mohandmohand2047 you always welcome :)
@@NSC-Modz how i know if 330 is good or others nec tokin type or the original best for this fix.?!
Why did the plastic not melt with so much heat applied
Ich habe das L modell und bei den kondensatoren auf der rsx seite steht 108 nicht 128. Sind das die gleichen von den werten? 3,3 v 470uF?
The NEC/TOKIN Capacitors have the serial number 0E128 - 1200uF "Phat Models" and 0E108 "Slim Models" - 1000uF Capacitance respectively.
In deinem Fall sieht es so aus als hätte deine Version schon die gleichen Necs wie die Slim Version, bei dir dann die mit 330uf, aber lieber die mit 6.3v, die halten mehr aus als die mit 2.5v.
Wobei bei denen im tut. steht geschrieben 470uf für alle Fat Modelle...
*Phat Models: "470uF"
*DECR-1000 - "TMU-520"
*DECHA00A - "COK-001"
*CECHA - "COK-001"
*CECHB - "COK-001"
*CECHC - "COK-002"
*CECHE - "COK-002/W"
*CECHG - "SEM-001"
*CECHH - "DIA-001"
*CECHJ - "DIA-002"
*CECHK - "DIA-002"
*CECHL - "VER-001"
*CECHM - "DIA-001"
*CECHP - "VER-001"
*CECHQ - "VER-001"
*DECR-1400 - "DEB-001"
Einfach mal testen, wenn nicht geht dann weißt du Bescheid.
www.psx-place.com/threads/tutorial-nec-tokin-capacitors-replacement-ylod-fix.25260/
Any tips what can cause YLOD when I changed capacitors and still no fix? I fixed two PS3s before with this method of changing capacitors so I think I do it ok but still no fix. It is CECHE.
Because it was overheating one day, because the PSU, a broken PCB, a burned CPU/GPU or some fuses...
Awesome job 👍
Thank you so much 🤗
Put thermal paste also on the 4 video memory chips! It's mandratory!
Can this Nec's be cause for GLOD (green light of death). Console is not overheating
Yep
Thank you very much for your reply. I ordered 10 pcs of theese caps. Have 2 ps3 Fat-s, one with YLOD and another one 60GB version with card readers. Second have GLOD.
@@lordred7462 hey can you recommend the place we can buy these capacitors from? Thanks.
@@habzmiah I bought them from ali express
@@lordred7462 thanks. Are they all 470uf that you have bought?
Great work... really help me to fix my own by myself 👍
You welcome :)
Need help Regarding Fat PAL PS3 60GB model, So I have a Problem I hadn’t used my PS3 fat in 3 months but today I booted it up(meanwhile this darn AC was turned on in the same room in the background) and was playing for 1 hour and a half and turned it off for about 10 minutes before turning it back on 3 seconds into the boot up screen and I turned off my AC At this Exact moment my Ps3 shutdown for some reason and I panicked and it started doing this exact red light of death and won’t turn on anymore come to think of it in the past also it would randomly shut off between gameplay 2 or three times making a red light but then it would turn on fine so I didn't pay much attention to it. So I’m guessing this might be a power supply issue or capacitor issue🤔if not then I’ll be really depressed. “Retro” games and old games are really rare in my country and eBay died 2 years ago here so There really is no one trustworthy enough here to be handed this old console.I found this PS3 Fat a year ago on my local craigslist by a stroke of luck! And bought it for $130. It’s always really dusty inside(and it was at the time of purchase too) although I had CFW installed on it So I turned up the fan speed so the temps don’t go higher than 61C. I hope my PS3 isn’t dead. 💀
Świetna robota
Burns the plastic everytime or doesn't lift off. Video didn't work for me.
nsc can you fix my ps3 fat? its my 3º ps3 with ylod is it possible to repair to never happen again? greetings from Portugal
Hey NSC! I have an original 60GB PS3 which I bought reballed, however I’ve noticed Uncharted 3 seems to cause the PS3 to turn off... I know there’s lots of reasons why it might be happening, but I’ve changed the thermal paste many times below and above the IHS plates, even installed a fan controller. Any thoughts what might be causing that? Other than Uncharted 3, the console works beautifully! :)
Hello Please try also an other PSU, and if it's still not working, you will need to replace the NEC's
Best Regards
NSC Modz Many thanks! I’ll swap the PSU with the one from my 40GB PS3 phat :D looking forward to more PS3 videos!
spywarefinder did you swap the PSU? How did you go yet?
Retro TH-camr I have not yet, however I plan to change it today! I have another newer 40GB non BC PS3 PSU that I will swap. I’ll give an update once I’ve installed it and I’l keep my fingers crossed! :D
spywarefinder let us know how you go, very curious
what if it is GLOD? is it still caused by the capacitor or the GPU only? thank you if you can reply
Replace RSX
How did you know that one was wrong?
Hmmm... It seems that I faced a unique YLOD, which is caused by BluRay Drive. When i disconnect ribbon cable, ps3 works just well (there's no games installed), but when i connect it back to the motherboard, i get YLOD, but fans are on. Anyone had ever faced with that? is it caused by TOKIN capacitors?
Syscon errors: 1001 and 1701. My cell seems to be dead.
Why did you decide just to replace that single capacitor? Was that single capacitor shorted?
Hello
Not really shorted, but not working like it should, please read the description for more info about that all, read also the tut. on psx-place.com, there you gonna see why i just replaced this one :)
Hi repartierst du auch Konsolen von anderen? Ich hab eine CHECHC04 die leider am YLOD gestorben ist.
Hallo
Ja sicher, ich könnt es mir anschauen.
NSC Modz Ok hat sich momentan wieder erledigt. Ich hab von einem Freund günstig eine CECHC04 bekommen. Wenn diese dann aber auch ein YLOD bekommt, könnte ich dir diese zuschicken? Bzw. wie viel würde das kosten? Im Internet stand ja das es an diesen NEC/TOKIN Kondensatoren liegt wenn du diese dann austauschen würdest währe der YLOD dann permanent gefixed?
hello, good video, how you know that is it the bad one nec tokin ?
Thank you very much. Like i told, just begin with the RSX side and try the first one, if it has not helped, go for the next one :)
@@NSC-Modz Good, nice i understand, my motherboard is a ver-001, is the same way to do ? and what you recommend me to do first a reflow of cpu and rsx or a replace of nec tokin? i have ylod of course haha
@@andresb2834 only reflow of you have remove the IHS and only of it was overheating...
@@NSC-Modz then the only way to fix YLOD is changing nec tokin , is that what you Say? i'm not do any reflow yet
@@andresb2834 no, a ylod can be caused from a lot things. If your ps3 was overheating, then you will need to reflow, was it not overheating, then you will need to go for the NecTokin
Does it still work has it fixed it ?
Hey man! I dropped my fat ps3 long ago and it ylod. I got some liquid flux and I am planning on trying to reflow to see if anything would work at all. When it fell, it was on so probably around 70 degrees which is hot enough to damage the token capacitors with a fall i guess. I also have to test the psu. I wonder if reflowing something physically damaged would work?
Not hassling you here, but curious- how does one "drop" a PS3? I periodically read that someone may have damaged their PS when they "dropped it", but I can't picture carrying it from room to room, let's say, and then just dropping it.
@@kengruz669 i had my charging cable plugged in and tripped on the wire. It brought the whole thing down about 3 feet off my desk. One of the worst experiences ever
@@Two_wheels_ninja Oh man- That kind of thing I've done myself, several times- with plugged-in laptops and phones. It really hurts with laptops. I once even stepped on a closed laptop that was left on the floor and didn't see. Days later I discovered it had screwed the screen. Thanks for taking my question as intended.
@@kengruz669 luckily my laptop had a protection vibrator meter (forgot the name) that shut it down for protection, no damage was done. At least we learned the hard way
What is the fan you are talking about can you link me to your video I want to keep my ps3 fat as cool as possible
You can let all like it is, most important is that you apply new thermal paste under the IHS.
You are super smart man... 👍
HOW DID YOU KNOW THAT NEC TOKEN YOU REMOVE FROM MAIN BOARD IS NOT OK DID YOU TEST IT? PLS REPLY THANKS
SHOCK, WHY DO YOU WRITE WITH CAPSLOCK ON xD Because it's mostly beginning with this one :)
You never answered the question. How do you test each cap? Or was it just a lucky guess? Please reply.
@@mikep5782 i got answered you, look back... i told you, because it begins mostly with that one...
NSC Modz You never answered me. Begins with what? What are you saying???
@@mikep5782 try to be just a little friendly to me... you came here and you think you can talk like that to me... maybe I'm wrong, but it feels like you just not really thankfully
Ciao grazie per il video .
La mia PlayStation 3 si accende,cominciano a girare le ventole velocissime poi mi scrive il sistema si è surriscaldato .
Risolvo cambiando i nec tokin?
Ciao :)
No, non è un problema con il NecTokin.
Questo è un problema con la pasta termica
devi farlo come ho fatto nel video.
Inizia al minuto 58:15.
th-cam.com/video/lVlUqlH91_U/w-d-xo.html
Questo processo è chiamato apertura IHS :)
By:NSC :)
@@NSC-Modz ciao Grazie della risposta!😊
La pasta termica l’ho già cambiata,dici che devo cambiarla di nuovo? Ho sbagliato a metterla? Grazie
@@lallylallygoogle3427 Sì, purtroppo devi rifarlo, ma questa volta anche dentro, devi aprire le patatine, dentro c'è di nuovo la pasta termica. Per favore guarda il video che ti ho inviato dal minuto 58, poi capirai di più e vedrai di più :)
@@lallylallygoogle3427 This is very good to :)
th-cam.com/video/1SXQJ2Y7rgk/w-d-xo.html
@@NSC-Modz grazie infinite!!!😊
awsome as allways .. your teensy downgrade with that terror guy 😂 video help me alot when i started doing this job as habbit in 2013 maybe .. i had a long jurney now i am managing my own shop and running my own repair busniess
You welcome, wish u the best with your shop, be 100% cool and clean to the people's, then your shop gonna be for ever :)
thanks nsc also need to tell you that reflow the nictoken .. can only refresh the capacitance for limited time .. and not a perminant fix
I want to do this but I’m not confident and worried I’ll break something.
My PS3 has YLOD only on certain games but temperatures are fine and paste is new so I’m assuming the TOKIN is the problem.
Do you know how to diagnose which TOKIN is the one causing the problem?
Also do you need to replace with Tantalum or can we use exact TOKIN replacements?
Hello Sounds like it's the NEC's making problems, test also an other PSU, and i would go for some new NEC's because the Tantal's make sometimes problems. Just replace the 2 on the top from the RSX and then it should work fine again, or just try one and test it if it's better or not. To diagnostic the NEC's, you will need to take it off first, that's why just replace it and you good to go without to waste so much time...
NSC Modz NSC Modz hey thanks for quick response! I tested another PSU already and no change so it must be the NEC’s. I found some new NECS on eBay so I will buy these and try to replace. Do I need to just worry about RSX necs? Or any other ones
@@retroonyoutube5402 i would first replace only the RSX NEC's and test if it's working better then. Best Regards
NSC Modz I am going to replace them as soon as my new NECs come in the post. Do you know how to check the voltage of the NECs and what the correct voltage should be? I want to make sure I put ones that are fully working on there
@@retroonyoutube5402 you can just test it when you have remove them, then you will be able to see the deference between an old and an new one.
I owned a ps3 that thinking now, it died by this issue.
Wish you luck with that one, maybe you can fix it :)
Can you please tell me which one is faulty or broken?
I don't know? I have not your PS3 here to test...
@@NSC-Modz ok but can you please tell me how check which one is faulty or broken
@@sagarkinger7068 you need a multimeter and you will need to take it off first, just then you can check it with a multimeter.
the question is how did know that capacitor was bad
Because i did it already very often and it begins mostly with this one ^^
Ich muss dir mal, meine schicken. Hab noch die 60gb
Her damit ^^
How much do you charge to fix
Not so much like other Charge, but I'm from Germany xD
I wouldn't recommend re-using those crappy capacitors. Better buy a new ones made of tantalum from our yellow friends.
Yeah i know already, this was just a great test :)
@@NSC-Modz can i send my ylod motherboard to u and if a ps3 has nec tokin but works good should i replace them tantalum
where to buy those?
@@bsanchez3563 do you know the suavest why to open cell ihs
What’s wrong with using the original replacement ones? I found some on eBay
Who in the USA can do this?
👍😀
😊✌
First Bitches!!!! hahahah NSC in the place to beeee!
du empfiehlst hier diese 470uf caps www.ebay.co.uk/itm/124077994907 hast du auch welche für 330uf? habe hier ein modell mit 108er nec token da braucht man ja die 330uf caps für.
Hier kannst du selbst auswählen was du genau brauchst: www.ebay.de/itm/173843511383
Danke shone meine freunde
Haha no problem
"We can see..."
I know i know... sorry 🙈
You talk way to much.
Yeah, tell me something new...